1.7mhz ultrasonic mist maker atomizing transducer ceramic humidifier 230W
Brand Name:Ours
Certification:CE and FCC
Model Number:ARS-QXHNQ13550 PZT-4
Minimum Order Quantity:1PCS
Delivery Time:2-3 days
Payment Terms:T/T, Western Union, PAYPAL
Contact Now
Add to Cart
Active Member
Location:
Shenzhen Guangdong China
Address:
506B,Dazhong industry park,sanhe ,DaLang street,longhua district,ShenZhen
Supplier`s last login times:
within 35 hours
Product Details
Company Profile
Product Details
1.7mhz ultrasonic mist maker atomizing transducer ceramic humidifier 230W
【Notice of use】
1．When the atomizer is working properly, please do not put your
hand above the atomizer spray chamber so as to prevent ultrasonic
injury.
2．Atomizer must be in water to work properly, before use, please
put it into the water, then put on the power supply, and to ensure
that the surface of the atomizing piece is in water condition, so
as not to damage the atomizer.
3．Switch off the power before you use the nebulizer, then remove
the nebulizer from the water.
4．When using this atomizer, please choose the output power greater
than 300W, the output voltage is DCV45 + 5 power supply.
5．When more than one provided using the same container, the need to
pay attention to the atomizer shell are communicated each other,
which do not use water line design solution and the wafer produce
potential difference (electrolytic atomizer casing itself has
charged) to prevent the generation of electric corrosion work
(electric spark corrosion).
6．The fog produced by the atomizer must be forced out by the fan,
and each group of nebulizer keeps the plane space of the 350CM2, so
as to avoid the water temperature being too high and shorten the
service life of the atomizer.
7．Atomizer is not suitable for atomizing corrosive liquid, so as
not to damage the atomizer, metal shell and atomizing piece.
8．Please do not damage the water level induction switch during the
installation so as to avoid the malfunction of the water level
switch and cause the atomizer to be out of control. After the water
level switch is damaged, it should be stopped. Otherwise, the
atomizing disc will be dry burned, thus further damaging the
atomizer. At this point should be repaired by professional
maintenance personnel can use the rear.
| Type | Voltage | Size | Power | Water Rate |
| ARS-WHHN230W | 48V | 253*91*70MM | 230 | 4.5KG/H |
1.7mhz ultrasonic mist maker atomizing transducer ceramic humidifier 230W
1.7mhz ultrasonic mist maker atomizing transducer ceramic humidifier 230W
Inquiry Cart
0