

Add to Cart
Waterproof Ultrasonic Mist Maker 10 Head Ultrasonic Mist Fogger Humidifier
Maintenance of twelve atomizer
In order to make this product reach the standard service life and
good use effect, please read the following contents carefully.
1. It is recommended that the working life of the atomizer will be
seriously affected after the atomizer is cleaned for at least 12
and a half months. When cleaning, use soft cloth with alcohol to
gently wipe the shell and surface of the 12 atomizing plates. Do
not use hard objects to clean the atomizing plates to avoid
scratching the atomizing sheets.
2. The water quality will affect the service life of 12 atomizing
plates, so it is recommended to use clean water.
3. After working for a long time (about 3000 hours), the service
life of the 12 head atomizing plate will decline, and the
atomization amount will be reduced. At this time, you can replace
the atomization plate. Please contact the dealer or our company to
purchase the atomization tablet and its supporting tool key.
The procedures for replacing the atomizer are as follows:
The power supply is cut off, and 12 atomizing plates are taken out
of the water and placed for a while. After the water in the 12
atomizing plates is all flowing out, the spray chamber and the
inner surface of the 12 atomizing plates are dried by dry cloth.
Then, use the tool spoon to "counter clockwise" the pressure ring,
remove the old energy exchange plate, and keep the atomization
energy exchange plate cavity dry and clean. Install the new energy
exchange plate with the front side upward and the reverse side
downward, and screw the pressure ring clockwise.
Type | Voltage | Size | Power | Water Rate |
ARS-WHHN230W | 48V | 253*91*70MM | 230 | 4.5KG/H |
Waterproof Ultrasonic Mist Maker 10 Head Ultrasonic Mist Fogger Humidifier