20khz 2000W Ultrasonic Welding Machine Transducer With Booster
Brand Name:OURS Ultrasonic
Certification:CE and FCC
Model Number:ARS-HJHNQ201500
Minimum Order Quantity:1set
Delivery Time:within 5 days
Payment Terms:T/T, Western Union,PAYPAL
Contact Now
Add to Cart
Active Member
Location:
Shenzhen Guangdong China
Address:
506B,Dazhong industry park,sanhe ,DaLang street,longhua district,ShenZhen
Supplier`s last login times:
within 35 hours
Product Details
Company Profile
Product Details
2000W Ultrasonic Welding Machine Transducer With Booster
Precautions for assembly of ultrasonic welding machine transducer:
1. Check contact surfaces. The contact surface should be flat and
smooth without scar. If there is any scar, it should be polished
with metallographic sandpaper above zero. It is required that the
defects can be ground smooth without damaging the flatness of the
contact surface.
2. Clean. Clean the screw, screw hole and contact surface with
volatile and non corrosive detergent, and thoroughly clean the
screw, screw hole and contact surface.
3. Installation. All connecting screw holes shall be perpendicular
to the contact surface.
4. Before tightening, apply a thin layer of butter or Vaseline on
the contact surface. Be careful not to apply it to the connecting
screws and screw holes.
6. Tighten the two components carefully. According to the different
specifications of connecting screws, the appropriate tightening
torque should be controlled. If possible, it should be tightened
properly.
7. If the joint surface is loosened again, there should be no scar.
8. Feel the vibration system with hand, the amplitude is uniform,
no strange sound, no local severe fever.
9. After working for a period of time, there should be no oxidation
or ablation marks on the joint surface, otherwise it means that the
contact is not good and the ultrasonic energy is seriously lost
here.
| Type | Full-length(mm) | Joint Bolt(mm) | Frequency(KHz) | Resonance Impedance(Ω) | Capacity(pF) | Input Power (W) |
| ARS-HJHNQ-152500 P8 | 153 | M20×1.5 | 15 | 15 | 13000 | 2500 |
| ARS-HJHNQ-152000 P8 | 167 | M20×1.5 | 15 | 10 | 9500 | 2000 |
| ARS-HJHNQ-151500 P4 | 171 | M18×1.5 | 15 | 12 | 12500 | 1500 |
| ARS-HJHNQ-151800 P4 | 118 | M20×1.5 | 20 | 15 | 15000 | 1800 |
| ARS-HJHNQ-202000 P8 | 128 | M18×1 | 20 | 10 | 11000 | 2000 |
| ARS-HJHNQ-202000 P8 | 124 | M18×1.5 | 20 | 12 | 10000 | 1500 |
| ARS-HJHNQ-20700 P8 | 112 | 1/2-20 UNF | 20 | 15 | 9000 | 700 |
| ARS-HJHNQ-20900 P8 | 133 | 1/2-20 UNF | 20 | 15 | 10000 | 900 |
| ARS-HJHNQ-20600 P8 | 121 | M18×1.5 | 20 | 15 | 6000 | 600 |
| ARS-HJHNQ-30500 P8 | 77 | M10×1.5 | 30 | 5 | 5500 | 500 |
| ARS-HJHNQ-28200 P4 | 92.1 | M10×1 | 28 | 20 | 3000 | 200 |
| ARS-HJHNQ-28100 P8 | 91 | M8×1 | 28 | 25 | 2200 | 100 |
| ARS-HJHNQ-28250 P8 | 94 | 1/2-20 UNF | 28 | 20 | 4000 | 250 |
| ARS-HJHNQ-202000 P8 | 128 | 1/2-20 UNF | 20 | 10 | 20000 | 2000 |
| ARS-HJHNQ-201500 P8 | 124 | 1/2-20 UNF | 20 | 10 | 16000 | 1500 |
| ARS-HJHNQ-201300 P8 | 128 | 1/2-20 UNF | 20 | 10 | 12500 | 1300 |
| ARS-HJHNQ-201500 P8 | 132 | 1/2-20 UNF | 20 | 10 | 11000 | 1500 |
| ARS-HJHNQ-20900 P8 | 123 | 1/2-20 UNF | 20 | 10 | 9500 | 900 |
| ARS-HJHNQ-152000 P4 | 171 | M18×1.5 | 15 | 12 | 10000 | 2000 |
| ARS-HJHNQ-35100 P8 | 71 | M8×1 | 35 | 25 | 2200 | 100 |
| ARS-HJHNQ-38100 P8 | 66 | M8×1.25 | 38 | 40 | 1200 | 100 |
| ARS-HJHNQ-38200 P4 | 65 | M8×1 | 38 | 14 | 3300 | 200 |
2000W Ultrasonic Welding Machine Transducer With Booster
20khz 2000W Ultrasonic Welding Machine Transducer With Booster
Inquiry Cart
0