TNMG1604 Carbide Turning Tools Indexable Carbide Inserts For Cast Iron Processing

TNMG1604 Carbide Turning Tools Indexable Carbide Inserts For Cast Iron Processing

The character of carbide inserts:

Tungsten carbide inserts has the character of high hardness, high wear resistance, good strength and good toughness, good heat resistance, and good corrosion resistance etc. And they are indexable and replaceable, also It can be changed to use other edges when one edge becomes broken. Carbide inserts are safely, quickly and easily replaced on the machine.

Models introduction:

Grades recommendation:

Advantages of our carbide inserts:

1. Good performance every time

Reliable carbide insert grade means you get a very reliable and secure performance at every time.

2. Higher production

Long tool life means you get higher machine utilization and higher production.

3. Increasing profits

Less tool breakage means you can control costs and reduce the cost per component to increase profits.

Customer’s case: when a insert is failed on performance:

1. Flank Wear

-Workpiece material contains high hardness chemical elements (tool steel, die steel)

Increase cutting speed if abnormal flank wear is caused by a very slow cutting speed.

Solution: Reduce cutting speed or feed rate or use more wear resistant grade

2. Crater Wear

-Workpiece material contains high hardness chemical elements

Solution: Reduce cutting speed or feed rate or use more wear resistant grade

3. Cracking

-Excessive feed rates when interrupted cutting

Solution : Reduce feed rate, Use tougher grade

Quality control:

Technical support:

Our company can providing the following technical services for customers:

1. Suggesting the grade according to the application and workpiece material

2. Suggesting the machining parameters to get higher machine utilization and higher production

3. Suggsting more suitable models to replace the brands of Japan, Korea and so on.

After-sale service:

1. Can be refund if there is a quality problem

2. Technical support will be offered once you need

3. Accepting customer visiting

Tool holder can be offered upon request.