

Add to Cart
Coating Machine Window Film Pharmaceutical Tablet Coating Pan Machine Tablet Coating Machine Perforated
1. The machine can finish organic film coating, water soluble film
coating, slow releasing coating, dripping pill coating and sugar
coating to tablets, pills, and candies.
2. Imported PLC, HMI, and touch screen are applied to meet
requirements of variable pharmacy technology with advantages of
stable operation and performance. They also comply with the
standards of GMP.
3. Under the force of linear deflector and mixer, tablets reverse
fluently, exchange frequently and will not be impacted after
falling down from a swell so that tablets keep intact.
4. Peristaltic pump applies continuous variable frequency
conversion. The speed can be adjusted within a range of 0~280 r/min
to eliminate defects that resistive speed regulation and voltage
speed regulation are not stable, potentiometer is breakable easily,
and that rotating speed cannot reach zero because of mechanical
speed regulation. Lastly, flame-proof and explosion-proof motor is
equipped to fully meet the explosion-proof requirements with stable
atomization performance. Spraying system can prevent the spray gun
from blockage and can be cleaned conveniently without any dead end.
5. The spray gun acquires advantages of evenly atomization and
large spray surface. Besides, the adjustable sprayer will not be
influenced by liquid volume.
6. The mixer combines mechanism and electricity in one to avoid
chaotic layout of wires and air tubes and to be cleaned more
easily.
7. It is newly designed that the negative pressure inside the film
coating pan can be measured and adjusted automatically to improve
the coating quality but save energy.
8. Hot air blower and ventilator are equipped with shockproof and
silencing equipment to lower the operation noise of the complete
machine and to not harm health of operator.
9. Temperature value is displayed and temperature can be
controlled.
10. The function of cleaning guns to avoid blockage is acquired.
Product Application
This film coating machine can be used for coating various tablets,
pills and sweets with organic film, water-soluble film and sugar
film, etc. And it has such characteristics as high efficiency, low
energy consumption and small floor area, etc. And it can be widely
used for coating various tablets, pills and sweets with organic
film, water-soluble film and sugar film etc. In such fields as of
pharmaceutical, food and biological products etc.
BG-150E High Efficiency Tablet Film Coating Machine | |
Max. tablet volume | 150 Kg / time |
Sugar coating drum diameter | 1200mm |
Feed inlet dia | 480mm |
Coating drum speed | 2-18 r.p.m |
Host machine motor power | 2.2 kw |
Exhaust cabinet motor power | 5.5 kw |
Exhaust blower air flow | 6457 m3/h |
Hot air cabinet motor power | 2.2 kw |
Air heater air flow | 2996 m3/h |
Hot air cleanness | 100000 level |
External dimensions of host machine | 900*860*1950 mm |
Host machine weight | 280㎏ |
External dimensions of hot air cabinet | 1570*1260*2030 mm |
Hot air cabinet weight | 850 kg |
External dimensions of exhaust cabinet | 950x950x1800 mm |
Exhaust cabinet weight | 550 kg |
Clean Air Pressure | 0.4Mpa |
Air consumption. | 80 m3 /min. |
Power | 3 phase and 5 lines15 kw |
Machine Details