Manual ID Cards Plastic Card Embossing Machine With Russian Code And Engilsh Code
Brand Name:CNJACKY
Certification:CE
Model Number:CNJ-6000
Minimum Order Quantity:1 set
Delivery Time:1-7 days after payment
Payment Terms:L/C, D/A, D/P, T/T, Western Union, MoneyGram,Paypal
Contact Now
Add to Cart
Active Member
Address:
No. 10, Floor 8, Unit 1, Bldg. 1, Zhongcheng Qingnianhui, No. 1, Baibuting Street, Danshuichi, Jiang'an Dist.
Supplier`s last login times:
within 36 hours
Product Details
Company Profile
Product Details
Manual ID Cards PVC Card Embossing Machine with Russian Code and
Engilsh Code
Product Specification:
PVC card embossing machine is used to press letters and numbers on
the finished PVC cardand membership card.So the card has
identifiability. The device is the second generation press, So its
accurate location, light weight,Fine-looking,convenient operation
and economical price make is to be the necessary device of many
fields such as card factories,spring presses,securities
business,banks,insurance,shopping
centers,clubs and restaurants,etc, To coordinate with CNJ-90
gilding press obtains the fine raised golden code effect.
33 Russian letters :А Б В Г Д Е Ё Ж З Й И К Л М Н О П Р С Т У Ф Х Ц Ч Ш Щ Ъ Ы Ь Э Ю Я
English letters A----Z
Arabic numerals 0-----9 Plus: CNY,USD, NO.
Small Symbol &, ·, , -, (, ).
Big Symbol ·, —, /, (, ).
Revise Flatten ■, ■.
Characters:
1. Adopt ISO international card appropriative characters.
2. Distance 2 choice
1/7 inch
1/10 inch (only for small letters)
1/12 inch(only for concave Arabic numbers)
3. Carton package size :L400 mm* W350mm * 250mm
4. Weight:12kg
Product parameters:
| Usage | Dog tag coder |
| Operation | By hand |
| Condition | New |
| Net weight | 11Kg |
| Gross weight | 12Kg |
| Color | Metallic color |
| Plate Type | Letterpress |
| Packing | Standard carton box |
| Machine size | L400mm*W350mm*H250mm |
Drawing for the Machine:
Use of the Machine:
A,Preparation Work
1. Insert the handle (5) into the axle hole in the right of the
machine, and screw on the fastening screw (6).
2. Pull the card framework (4) to the outermost, and put in the
required card sample as needed.
3. Insert lean the card to be imprinted into the metal slot in the
front-end of the card framework, gently push ahead, and press down
the card to put in the metal slot in the front-end of the card
framework.
B,Row Spacing Selection
According to different models, there are 1/7inch, 1/10inch and
1/12inch to choose for the transverse pitch among the imprinted
characters, the selection of the character transverse pitch can be
finished by turning the word spacing adjusting knob (7). 1/7inch
position is the large character spacing; 1/10inch is the small
character spacing; 1/12inch is italics spacing (these spacing is
available only in concave code printer and Embossing & concave
code printer models.).When uses the Embossing & concave code
printer molding machine, needs to choose when 1/7inch and the
1/12inch character is apart from the gap, must first the character
distance adjust Niu (7) to change 1/7inch and inch 1/10,or the 1/12
inch place, then instigates in front of the machine the side
character to be apart from the adjustment to dial the change-over
switch (8) to choose 1/7 inch and 1/10 inch or the 1/12 inch
character is apart from the gap.The fore-and-aft distance uses the
fixed gap, each gap is tooth /20inch, may gently on rollers card
frame (4) choice. It can use the fixed gap for the longitudinal
separation, 1/20inch for each gap, pull and push the card framework
(4) to select.
C,word-selection positioning coding
1. Turn the code-selection plate (1), and turn the required
imprinted character to the character pointer (2).
2. Gently push and pull the card framework (4) for the up-down
position-selection of the card.
3. For the left-right selection of the card, move right can be
finished by directly gently the framework (4); move left, you can
gently depress the handle (5) (about at 15 degree), then reset, and
the framework (4) can move one space left; after the above
operations, the card can be set in the imprinted position.
4. The card imprinting is taken from left to right, it will
automatically move one space left after each character is
imprinted; press 3 for the blank.
5. Imprint the character: to operate the handle (5), push to down,
and then reset.
6. If the imprinted character may be deeper or shallower,
undesirable, then it can be adjusted by adjusting screw in the
regulating port located in the bottom of the machine.
Regulation means: use the Z outside-hexagonal spanner along with
the code sprinter to a little loose the hold-down nut, and then
inside-hexagonal spanner with the code sprinter to adjust the
middle regulating screw. Attention: turning the regulating screw in
clockwise may deepen the typed characters while clockwise turning
may lighten the typed characters. After finishing, please use the
inside-hexagonal spanner with the code sprinter to make the
regulating screw stable, and then use the Z outside-hexagonal
spanner to fasten the hold-down screw.
D,Error Correction
If you need modify the characters, you can select ■ or ■ to modify
according to the concrete requirements.
When modifying the small character, please use ■ to press small
characters flat.
When modifying the large character, please use ■ to press largely
characters flat.
Same operations to the coding methods, after smoothing, impress the
required character again in the original position.
Considerations:
1.Be sure to take great care of the pointing position of the row
spacing ruler (Character Pointer) when you beating code onto the
cards. forbid press the handle when the instructed region is not in
the effectual region in order to avoid the stencil-piate to be
damaged.
2.When you rotate the code disk.don`t press down the handle for the
fear of damaging the machine.
3. When you want to shifts the gears position, please note the
exact orientation, if in the midway needs to replace, please use
the left hand to block the card Framework gently, in order to keep
it in the time of conversion neutral card Framework without moving;
4. Forbid strictlys hand or in other foreign matter insertion
machine accidentally; strictly prohibit work without card on the
machine .
5. When the machine is out of use, please move the card Framework
to the end of leftmost .
Manual ID Cards Plastic Card Embossing Machine With Russian Code And Engilsh Code
Inquiry Cart
0