Wood Furniture Acrylic Spray Paint Metallic Scratch Resistant UV Protection

Waterproof Acrylic Spray Paint Fast Dry Metallic And Wood Aerosol Product Spray Paint

Art No. B1401

Product name: Scratch Resistant Wood Furniture Spray Paint

Applications:

1. This product is made from acrylic resin. For interior/ exterior use where a mid

to low gloss sealer is required.

2. Provides UV protection and is water repellent.

3.Can be used with Matt Lacquer Primer.

4. Ideal for use on wooden gates, fences, guard rails etc.

5. Suitable for all wood types.

6. Not recommended for decking.

Features:

1. Fast drying
2. Easy operation

3. Interior use

4. Exterior use
5. NO CFCs

Packing Details

Shelf Life: 2 years

Storage Condition: KEEP IT OUT OF REACH OF CHILDREN; Store it in cool, dry and well-ventilated place lower than 45 degrees; Keep away from fire source; Do not puncture or burn the bottle.

Directions:

1.Clean the surface thoroughly, removing dirt, grease, oil, wax, rust, moisture, etc. Do not spray over loose paint
2.Shake can thoroughly for at least 1-2 minutes until the agitator begins to move freely.
3.Hold the can 15-25 cm from the surface to be sprayed. Start and finish spraying off the edge of the surface. To obtain a smooth finish, spray 2 or more thin coats in a steady side to side motion, preferable 1 0 minutes interval between each coat.
4.Paint coats are dry to touch in approximately 20 minutes. Allow more drying time at cooler temperatures.
5.Avoid spraying in rainy day or freezing environment.
6.Store in a cool dry place.

Precautions:

After spraying, clean the valve by turning the can upside down and pushing the spray head for approximately 4 seconds. If the valve clogs, pull out the spray head and rinse it in a solvent such as paint thinner.

Samples

Free samples are available; we can customize special samples for you.

Questions and answers:

Q:What is the MOQ?(Minimum order quantity)
A:Our own brand and package has no MOQ,Private brand and design are 30000pcs for each item which depend on the can size you choose.

Q:Can you make our own brand and design,is there any extra charge?
A:yes,OEM and ODM is available.We can make customer's own brand and design which you have made in CDR or Al or PDF format.or you can tell us your ideal ,then our designer will figure it out accordingly.

Q:Is it possible to get free samples,and how can we get it?
A:Yes,We can offer free samples within 5pcs,and it will be sent though special agent in special way for those are dangerous products.and no courier will accept them normally.
New customer will need to pay for the courier fees ,and sample will be sent by DHL or EMS or TNT, It takes 5-7 working days or so.

Q:,How about the production time?
A:It will take 20-25 days after deposit received and all designs confirmed

Q:What is your payment terms?
A:Payment terms are as below:
1,T/T30% deposit ,balance should be paid before shipment
2,T/T,30% deposit ,70%by L/C at sight

Detailing Images:

Plyfit Industries China,Inc. was established in October 2003, we are an industrial corporation specialized in developing, manufacturing and marketing chemical products including aerosol car care product and spray paint, etc.

Our factory occupies 44,000 square meters, with advanced equipment and production lines, we are devoting in providing customers with quality products and excellent service.

As early as in 2004, we have passed ISO9001: 2000 international quality management system.our products have all achieved the European & USA standards of quality, environmental protection and security. In addition to the EU REACH certification, our specific products have passed the TUV and CEST test and get the INTERTEK certification for EN71 non-toxic (non heavy metal) test.

While backed up by the modernized advanced production facilities, more importantly, we hold an outstanding RD/production/management & marketing team consisting of skilled workers, experienced engineers and professional managers. With more than 10 years experience in this industry, we are holding mature formula and advanced technology, we can provide comprehensive solution from design, RD ,production to marketing according to customer’s requirement.

So far, we have exported to more than 70 countries and regions in the world, including the United States, Canada, Japan, Russia, Europe (such as Germany, Spain, Britain, Denmark ... ..), South America, Australia, The Middle East, Southeast Asia, Africa,etc.

Today, PLYFIT continuously dedicates effort to technology revolution for better quality ,service and higher customer satisfaction.

Besides traditional business, we are keen to establish long-term cooperation with you on OEM or ODM business.

Profession creates good life!