

Add to Cart
Distribution cabinet three phase lightning arrester , limp4.5ka surge protection , power supply lightning protectorDistribution cabinet three phase lightning arrester , limp4.5ka surge protection , power supply lightning protector
Product introduction
Surge protector is the lightning protection measures adopted by Zhejiang toer Electric Co., Ltd. for the electrical system. It is widely used in home, third industry and industrial fields to protect sensitive lines and protect the surge of lightning and direct lightning or other instantaneous overvoltage.
Structure and Principle
SPD is a port, shocking protection, indoor-mounted installation, voltage-limited.
SPD hold disconnector inside, when SPD breakdown failure by over heating, the disconnector can remove from the power grid automatically, and show indication signal. When SPD is working properly, visible window display green, it display red when it breakdown and disconnect.
1P+N,2P+N,3P+N SPD consist of 1P,2P,3P SPD+NPE zero ground protection module, apply to TN-S, TN-C-S and other power supply system.
Working principle of product
The lightning arrester can effectively protect the power equipment.
Once the abnormal voltage appears, the lightning arrester will play
a protective role. When the protected device is running under
normal working voltage, the arrester will not work, and it will be
regarded as a circuit for the ground.
Once the high voltage is present and the insulation of the
protected equipment is endangered, the lightning arrester acts
immediately and leads the high voltage impact current to the earth,
thus limiting the amplitude of the voltage and protecting the
insulation of the electrical equipment. When the overvoltage is
gone, the arrester is restored to its original state quickly, so
that the system can be supplied normally.
. The main function of the arrester is to reduce the voltage value
of the protected equipment by the action of parallel discharge gap
or nonlinear resistance, so as to protect the power equipment.
Product features
1. core components are strictly screened, stable performance and
reliable operation.
2. using the latest arc extinguishing technology to avoid fire
completely
3. module is designed and installed conveniently and can be
replaced directly.
Product specification
Model | TRS30B+C | |
Rated Operating Voitage | UC | 385 |
Voltage protective level | Up(KV)≤ | 2.0 |
Max discharge current | Imax(8/20μS) | 60 |
Iimp(10/350μS) | 4.5 | |
Nominal discharge current | In(8/20μS) | 30 |
Ressponse time | NS | <25 |
Lndication of invalidation | Aging invalidation:green Normal,red:Invaldation | |
Operating condition | Temp:-40℃~+70℃ | |
RH≤95%(25℃) | ||
Sea level elevation≤3km | ||
Remote signal function | Can also picking | |
Remarks | Other max continuous operating voltage can be customized |
Notice of product
1. grounding lines should be short, thick and straight, so as to
reduce the influence of distributed inductors on the ability of
lightning electromagnetic pulse.
2. it should match the working voltage of the protected equipment.
Please install according to the installation sketch.
3. it should match the working voltage of the protected equipment.
Please install according to the installation sketch.
Company profile
Incorporated in 2006, Zhejiang Thor Electric Co., Ltd has built everything to offer a wide range of innovative and reliable surge protection solutions and products.
All types and classes of our lightning and surge arresters 20KA~200KA(8/20μS) and 15KA~50KA(10/350μS) are tested and pass all the requirements based on their class.