Lightweight Ethernet Surge Protection Devices Rj45 Lightning Arrester For Network Equipment

Lightweight network surge protectors protect network equipment from surge damage

Model: Trss-rj11 / 45

colour:white

Authentication:CE ECM

Product Details

The TRSS-RJ45/8 type network lightning arrester is an overvoltage protector designed for ETHERNET network. It can be used for servers, workstations, HUB and other RJ45 interfaces. For example, the input / output terminal of EPRJ45-5/100M is RJ45 interface, and its transmission signal rate can reach 100Mbps or 1000Mbps. It is mainly used for lightning protection measures against network system. To prevent high voltage from causing short circuit and combustion and explosion is the important manifestation of internal lightning protection.

Product features

1. installation and use of convenient novice can also be easy to install

2. PCB is designed with microstrip, good isolation, low line disturbance

3. extremely low online resistances reduce unnecessary attenuation of signal intensity and increase the distance of signal transmission to the maximum.

4. the product has many interfaces and is easy to use. It doesn't need to worry about the number of interfaces.

Product specification

Working principle of product

The working principle of network lightning arrester is to present high resistance open state with a low voltage, low resistance short circuit state at high pressure, and a combination of over voltage protection electronic devices which can withstand hundreds of amperes and large current in parallel on power supply line and signal transmission line. When encountering lightning and high voltage and high current, it will appear short circuit immediately, and at the same time, the total power switch will be disconnected, so that the computer equipment will be protected.

Use of attention

1. grounding lines should be short, thick and straight, so as to reduce the influence of distributed inductors on the ability of lightning electromagnetic pulse.

2. the grounding of the signal protector should be connected to the grounding grid through the electronic switch.

3. connect the grounding wire of the lightning protector with the ground wire of the lightning protection system.

4. this product needs no special maintenance. The lightning arrester should be checked regularly, especially in the thunderstorm season and the whole thunderstorm period. When the system fails to doubt the lightning arrester, the lightning arrester can be dismantled and rechecked. If the system is restored to normal after the restoration to the state before use, it indicates that the lightning arrester has been damaged and must be replaced immediately.

Company profile

Incorporated in 2006, Zhejiang Thor Electric Co., Ltd has built everything to offer a wide range of innovative and reliable surge protection solutions and products.

been designing new products to meet the RoHS directive since 2006. Thor’s ongoing commitment to RoHS compliance includes continuing efforts to reduce the presence of hazardous substances in the design and manufacture of a growing number of popular products.

Product packaging:Carton packing

Transportation method

2. Trains, ships, aircraft transport

Thor is all about protecting against the damaging effects of power transients. It is our goal and mission to connect our customer challenges with high-quality, right-priced solutions and products – completed by unrivaled customer service and technical support.

Incorporated in 2006, Zhejiang Thor Electric Co., Ltd has built everything to offer a wide range of innovative and reliable surge protection solutions and products.

Thor is following the international quality system standards, is ISO 9001 certified and our technical standards are in line with GB18802.1-2011/IEC61643-1.

All types and classes of our lightning and surge arresters 20KA~200KA(8/20μS) and 15KA~50KA(10/350μS) are tested and pass all the requirements based on their class.

Thor has been designing new products to meet the RoHS directive since 2006. Thor’s ongoing commitment to RoHS compliance includes continuing efforts to reduce the presence of hazardous substances in the design and manufacture of a growing number of popular products.

Zhejiang Thor Electric Co., Ltd is committed to meeting the requirements of the European Union’s Waste Electrical and Electronic Equipment (WEEE) directive. This directive requires producers of electrical and electronic equipment to finance the take-back for re-use or recycling of their products placed on the EU market after 2005.