

Add to Cart
Fast Ethernet network protector Network camera dedicated Network professional surge protector
Model: Trss-rj11 / 45
colour:white
Authentication:CE ECM
Product introduction
TRSS-RJ45/8 type network lightning arrester is used on the RJ45
interface of the LPZ2- LPZ3 partition interface to protect Ethernet
computers, servers, switches, routers and other network devices.
The network surge protector is suitable for lightning strikes or
other surge protection of network devices such as SWITCH, HUB,
ROUTER and computers of six types of wiring systems. It has the
characteristics of large flow capacity, low residual pressure
level, sensitive reaction, stable performance and reliable
operation.
Working principle of product
The network arrester can effectively protect the power equipment.
Once the abnormal voltage appears, the lightning arrester will play
a protective role. When the protected device is running under
normal working voltage, the arrester will not work, and it will be
regarded as a circuit for the ground. Once the high voltage is
present and the insulation of the protected equipment is
endangered, the lightning arrester acts immediately and leads the
high voltage impact current to the earth, thus limiting the
amplitude of the voltage and protecting the insulation of the
electrical equipment. When the overvoltage is gone, the arrester is
restored to its original state quickly, so that the system can
supply electricity normally. The main function of the lightning
arrester is to reduce the voltage value of the protected equipment
through the action of parallel discharge gap or nonlinear
resistance, and to reduce the voltage value of the protected
equipment, so as to protect the power equipment.
Product features
1. The core components are strictly screened, the performance is
stable, and the work is reliable.
2. The extremely low online resistance reduces unnecessary
attenuation of signal intensity and increases the distance of
signal transmission to the maximum.
3. Advanced production technology and beautiful appearance
4. Product multi interface is easy to use, and it doesn't need to worry about the number of interfaces.
5. The upgraded triode is equivalent to 2 diodes
Product specification
Model and specofocation | TRSS-RJ45/4 | TRSS-RJ45/8 | |||||
Rated Operating Voltage | Un | 5V/12V | |||||
Max continuous operating voltage | Uc | 6V/15V | |||||
Voltage protective level | Up(V)〈 | 40/60 | |||||
Max discharge current | Imax(8/20μS) | 5kA | |||||
Nominal discharge current | In(8/20μS) | 3kA | |||||
Response time | ns | ≤1 | |||||
Adaptive date transfer rate | 100Mbps | ||||||
Insertion loss | ≤0.3dB | ||||||
Configuration dimension | 104×25×25 | ||||||
Protective circuit | 1.2.3.6 | 1.2.3.4.5.6.7.8 | |||||
Operating condition | Temp:-40℃~+70℃ | ||||||
RH≤95%(25℃) | |||||||
Sea level elevation≤3km | |||||||
Remarks | Other max continuous operating voltage can be customized |
Use of attention
1. Connect the grounding wire of the lightning protector to the
ground wire of the lightning protection system.
2. The lightning arrester of the network switch is a series
connection mode.
3. Please choose the network switch lightning protector that is the
same as the protected device's interface type.
4. The lightning protector of the network switch should match the
working voltage of the protected device. When installing, please
connect according to the installation sketch map.
Company profile
Thor has been designing new products to meet the RoHS directive
since 2006. Thor’s ongoing commitment to RoHS compliance includes
continuing efforts to reduce the presence of hazardous substances
in the design and manufacture of a growing number of popular
products.
We are committed to meet the requirements of the EU waste
electrical and Electronic Equipment Directive. This Directive
requires manufacturers of electrical and electronic equipment to
put their products back into the EU market after 2005, and then use
them or recycle them.