Ornamental Residential Lightning Rods / Wires , Zinc Plating House Grounding Rod

household grounding wire, electric grounding rod, lightning protection and grounding, lightning rod and zinc plating.

Brief introduction

Lightning rod is the lightning protection measures adopted by Zhejiang tol Electric Co., Ltd. to independently develop and produce lightning strike hazards. It is an electrical device that can release lightning or simultaneously release the overvoltage energy of the power system, protect the electrical equipment from the instantaneous overvoltage, and cut off the continuous flow, and not cause the system grounding short circuit.

Product specification

Working principle of product

The lightning rod is connected to the ground through the wire and forms the equal potential difference with the ground. Using its own height, the electric field of the lightning cloud is distorted to increase the electric field intensity to the limit value. It begins to ionize and descends the pilot discharge; the lightning rod produces the tip discharge under the action of the strong electric field, and forms the upward pilot discharge; both converge to form the lightning passage, Then it goes into the earth to achieve the effect of lightning protection. In fact, the lightning rod is a lightning needle, which can lead the surrounding lightning and discharge ahead of time and pass the lightning current through its own grounding conductor to the ground, avoiding the direct lightning strike of the protection object.

Product features

1. beautiful, ornamental

2. installation and use, strong and reliable

3. under the same condition (height), the protection range is larger than the ordinary lightning rod.

Use of attention

1. ground lines should be buried in the ground 1-3 meters deep

2. we need to install the base of lightning rod in advance and install the base seat in advance.

3. the lightning arrester lanes are fixed on the preset prefabricated base.

4. the connection between the flanges of the lightning rod and the top pedestal of the vertical pole is reliably welded.

Company profile

Thor is following the international quality system standards, is ISO 9001 certified and our technical standards are in line with GB18802.1-2011/IEC61643-1.

Product packaging:Carton packing

Transportation method

2. Trains, ships, aircraft transport

Thor is all about protecting against the damaging effects of power transients. It is our goal and mission to connect our customer challenges with high-quality, right-priced solutions and products – completed by unrivaled customer service and technical support.

Incorporated in 2006, Zhejiang Thor Electric Co., Ltd has built everything to offer a wide range of innovative and reliable surge protection solutions and products.

Thor is following the international quality system standards, is ISO 9001 certified and our technical standards are in line with GB18802.1-2011/IEC61643-1.

All types and classes of our lightning and surge arresters 20KA~200KA(8/20μS) and 15KA~50KA(10/350μS) are tested and pass all the requirements based on their class.

Thor has been designing new products to meet the RoHS directive since 2006. Thor’s ongoing commitment to RoHS compliance includes continuing efforts to reduce the presence of hazardous substances in the design and manufacture of a growing number of popular products.

Zhejiang Thor Electric Co., Ltd is committed to meeting the requirements of the European Union’s Waste Electrical and Electronic Equipment (WEEE) directive. This directive requires producers of electrical and electronic equipment to finance the take-back for re-use or recycling of their products placed on the EU market after 2005.