Overload Protector Short Circuit Breaker , Electrical Mcb Switch Stable Performance

household short circuit overload protector, small air switch, DZ47 small circuit breaker.

Product description

DZ47 small circuit breaker is the current that can connect, load and break normal circuit. A mechanical switch electric appliance that can also be connected, carrying a certain time and subsection current under the prescribed irregular conditions, is mainly applicable to AC 50/60Hz, the rated voltage is 230V/400V and below, the rated current to 63A.

Product features

1. band energy storage mechanism operation, contact close fast

2. installation and use of convenient novice can also be easy to install

3. core components are strictly screened, stable performance and reliable operation.

Product specification

Working principle of product

A small circuit breaker is the principle that the bimetal bending is directed regularly with the increase of temperature. When the circuit breaker is closed in normal working condition, the internal bimetallic sheet is heated by a certain current, and the thermal expansion coefficient of the two bimetalles is different. It is not enough to release the release mechanism. When the line appears general overload, when the overload current is reached, the bimetallic sheet has a larger bending angle and a lever in the release mechanism, which is enough to push off the release mechanism, and from the small circuit breaker, it plays the role of super load protection. The size of the bimetallic strip is different from that of the small circuit breaker.

Use of attention

1. the insulation resistance between the pole and pole (except the monopole), the end and the outlet end of the circuit breaker should be not less than 2M Omega, and the insulation resistance between the pole and the shell, the pole and the installation rail should not be less than 5M Omega. If the product is not required, the product shall not be used and should be exchanged in time with the supplier.

2. the setting temperature of the series circuit breaker is 30 +5 C. If a number of circuit breakers are loaded into the sealed box at the same time, the temperature of the box is raised correspondingly, and the current is 0.8In.

3. the circuit breaker needs to check contacts after the circuit is short circuited. If the main contact burns seriously or has pits, it needs to be repaired.

Company profile

Thor is all about protecting against the damaging effects of power transients. It is our goal and mission to connect our customer challenges with high-quality, right-priced solutions and products – completed by unrivaled customer service and technical support.

All types and classes of our lightning and surge arresters 20KA~200KA(8/20μS) and 15KA~50KA(10/350μS) are tested and pass all the requirements based on their class.

Product packaging:Carton packing

Transportation method

2. Trains, ships, aircraft transport

Thor is all about protecting against the damaging effects of power transients. It is our goal and mission to connect our customer challenges with high-quality, right-priced solutions and products – completed by unrivaled customer service and technical support.

Incorporated in 2006, Zhejiang Thor Electric Co., Ltd has built everything to offer a wide range of innovative and reliable surge protection solutions and products.

Thor is following the international quality system standards, is ISO 9001 certified and our technical standards are in line with GB18802.1-2011/IEC61643-1.

All types and classes of our lightning and surge arresters 20KA~200KA(8/20μS) and 15KA~50KA(10/350μS) are tested and pass all the requirements based on their class.

Thor has been designing new products to meet the RoHS directive since 2006. Thor’s ongoing commitment to RoHS compliance includes continuing efforts to reduce the presence of hazardous substances in the design and manufacture of a growing number of popular products.

Zhejiang Thor Electric Co., Ltd is committed to meeting the requirements of the European Union’s Waste Electrical and Electronic Equipment (WEEE) directive. This directive requires producers of electrical and electronic equipment to finance the take-back for re-use or recycling of their products placed on the EU market after 2005.