

Add to Cart
Power surge protection device household circuit surge arrester safety protection
Product Details
Surge protector is an electronic device that provides security
protection for all kinds of electronic devices, instruments and
communication lines. When the peak current or voltage is suddenly
produced in the electrical circuit or communication line because of
the external interference, the surge protector can guide the shunt
in a very short time, thus avoiding the damage to the other
equipment in the circuit. It is usually installed in the floor
distribution box, computer center, telecommunication machine room,
elevator control room and so on.
Product features
1. temperature control protection circuit, built-in thermal
protection;
2. safety insulation of fire retardant and high flame retardant
material
3. The design and installation of the module are convenient and can
be replaced directly.
Product specification
1. Rated Operating Voltage(UN):380V
2. Max continuous operating voltage(UC):385V
3. Voltage protective level(UP):1.8KV
4. Max discharge current(IMAX):40KA
5. Nominal discharge current(IN):20KA
6. Response time(NS):<25
Working principle of product
The function of surge protector is to limit the transient
overvoltage to the power line, the signal transmission line in the
voltage range that the equipment or system can bear, or to inflow
the powerful lightning discharge into the ground, and protect the
protected equipment or system from damage by the impact.
Use of attention
1. the extra voltage drop caused by the device terminal.
2. and SPD is established.
3. limit the inductive coupling between the protected part after
installation and the part of the unprotected device, so we need to
make some measurements. The mutual inductance can be reduced by the
separation of the inductive source and the sacrificial circuit, the
selection of the loop angle and the limitation of the closed loop
area.
Product packaging:Carton packing
Transportation method
2. Trains, ships, aircraft transport