Ultrasonic Welded Micron Grade Liquid Filter Bag

The whole ultrasonic welding plastic ring micron grade liquid filter bag

The high quality engineering plastic is selected to make the plastic collar with excellent physical properties and chemical corrosion resistance.The handle on the bag opening is above the liquid surface for easy replace the filter bag, and improve the work efficiency. Plastic collar specially designed, can be applied to almost of the bag filters on the markets at present.Any kinds of specification 1-4 filter bags, one specification of us produced fully welded liquid filtration bags with plastic collar can be compatible with.

Features

Seam treatment: ultrasonic welded or thread stitched

Seal ring options: Polypropylene or polyester SDS, STS, Zinc coated steel or stainless steel snap fit rings.

Ring attachment: Ultrasonic welded or thread stitched

Micron range:1,3,5,10,25,50,75,100,125,150,200 micron are available.

Efficiency: Nominal rating, 85% contaminant particle retention efficiency with a single pass.

Surface treatment: Fiber migration and extractable free glazed media surface treatment.

Media grade: Exclusively FDA compliant media , silicon free, and oil free.

Optimum replacing pressure differential 0.10 Mpa, Max 0.18 Mpa

Broad chemical compatibilities.

Technical Specifications

Chemical Compatibility

Micron/Mesh Conversion Table( Nylon /NMO)

Applications:

Auto coating & paint

Water purification& processing

Pharmaceutical

Food& beverage

Bulk &fine chemicals

Electronics

Shipping way & Package details :

By sea / air / express

Shanghai / Ning Bo/Tianjin

Carton Box Dimension: 40cmx50cm x60 cm

Gross weight: 12 kgs per box

Qty inside: 100 pcs P1S

How to replace the filter bag

1. Change-out Pressure Differential: The recommended bag filter change-out pressure differential across the bag media is 0.10MPA ( 15 PSI). Continuing beyond this point will result not only in rapid flow rate reduction and contaminant unloading, but also increase the risk of filter rupture. The max differential pressure allowed is 0.23 MPA( 35PSI).

2. Removal of use filter: During operation, the filter media many be embedded into perforated on the basket under excessive pressure, making it difficult to remove the bag filter.When this happens, don’t use excessive force to pull the bag, as it will break the ultrasonic welding line and detach the seal ring form the bag body. To safely remove the bag, shake the basket rapidly and then use a spine motion to separate the bag from the basket, slowly pull the use bag filter out.

As the young pioneer enterprise in the environmental protection industry, Shanghai ShengXuan Environmental Engineering Co.,Ltd adheres to the policy of putting people first and giving priority to science and technology and devotes itself to the devotes itself to the development and manufacture of series kinds bag filters and accessories which can be widely used in dust and liquid filtrations.

Now ,we have Three main parts products have been recognized and approved by users all over the world.

Dust bag filter industries

We produce the dust filter bags from the needle felts to the filter bags in whole own design and techology, FMS, Fiberglass,PPS, Nomex, P84,PTFE ,PET/PP which widely used in power, metallurgy,building materials, cement and chemical indstries. In the same time, we also provide the technology service, maintenance service in customers site factory.

Fluid /liquid bag filters

From the liquid bag filters to the bag filter housings, produced by ourselves.

Conveyor belts industries

Polyester woven belts, air slide belts, conveyor belts , can be used in all conveyor industries.

We Sheng Xuan is determined to provide the air and water pollution control industry with best quality products and services.