Wedge Fillers Placement Slot Insulation Machine Armature Coil And Stack DMD PMP

Armature Coil And Stack DMD PMP Wedge Fillers Placement Motor Insulation Machine WIND-IW-2

(1) Application:

This slot top cell forming and inserting machine WIND-IW-2 automatical form and insert wedge to form

electrical insulator for coils and stack.

(2) Parameter:

Armature O. D: 20-55mm

Length of lamination: Max 60mm

Shaft length: 32~250mm

Shaft O. D: 6~20mm

Slot number: 8-24 slots

Commutator O. D: 16~50mm

Length of wedge: 15-60mm

Speed regulation range: 0~60Hz

Wedge shape: Flat, U or R shape

Thickness of wedge: 0.2 mm ~ 2.0 mm

Efficiency: 0.5sec - 0.8sec/per slot, loading-Clamp Feeding-unloading (total 8~10sec/cycle for

12 slots armature)

Air source: Air pressure: 4~6kg/cm2

Machine power: 1.0KW

Tooling/fixture: Fast changing integrity forming wheel structure

Voltage: AC220V± 10%, 50/60Hz

Weight: About 400Kg

Dimension: (L)910 x (W)880 x (H)1300mm

(3) Main components:

PLC: MITSUBISHI or Omron programmable controller

Relay: OMRON

Proximity switch: OMRON

MITSUBISHI or Panasonic frequency converter

Touch screen: WENVIEW PLD(7")

Air switch: MITSUBISHI

Power source: Mingwei

Switch: SCHNEIDER

Brake: MIKIPULLEY (Japan brand)

Ball bearing: UBC (USA brand)

Linear guide: ABBA (Taiwan brand) or CPC or Shangying

Cylinder: SMC

Air source treatment elements or electromagnetic valve: SMC

Place insert the insulation wedge to armature, insulate the armature winding and stacks, also fixten the

armature windings.After winding, use thick wedge normally 0.5mm while insulaiton polyester is usually

0.25mm to insert to armature, tight the armature and strength the winding and reduce motor noise​.

Please click below photo to view video

Shanghai Wind Automation Equipment Co.,Ltd supply motor automation solution for global motor manufacturers. Setted up in the year 2010 by Senior Engineer Mr.Wang who involve in electric motor filed since 1998. Through continuous innovation and participating in globalization, it has now developed into a large enterprise that integrates R&D, production and sales to provide motor solutions for customers worldwide.

Shanghai Wind Automation built a 3C business system

1.Customized Machinery

​ Provide armature,stator motor manufacturing mchinery,

including stand along machine, fully-auto complete production line

​

2.Characteristic Component

Supply the full range of motor components such as commutator, magnet, fan, motor cover,etc.

3.Comprehensive Service

Provide motor project technical support and consulting

Centered on Shanghai, the company has formed four production bases in the Yangtze River Delta city group and supplied over 20 countries including USA, Mexico,Brazil, Argentina, Turkey,France,Germany,

Czech Republic,Romania,India, Bangladesh and So on.

Our objective is to provide turn-key motor manufacturing automation equipment with no limitation

as free as the Wind, reduce the labor cost and free the human being operator,

make the life easier and more enjoyable.