Hardware Spring Flat Fender Washer , Metric Metal Spacer Washers Flat Ring Gasket
Brand Name:MAIDE
Certification:ISO
Model Number:M3-M56
Minimum Order Quantity:1TON
Delivery Time:7-30work days
Payment Terms:L/C, D/A, D/P, T/T, Western Union, MoneyGram
Contact Now
Add to Cart
Active Member
Location:
Handan Hebei China
Address:
Handan Yongnian
Supplier`s last login times:
within 34 hours
Product Details
Company Profile
Product Details
Round Hardware Spring Flat Metal Washers , Metric Flat Ring Gasket M3 - M52
Product Description
Flat washers are also known as flat washers. They are mainly
stamped with iron plates. They are generally flat washers with a
hole in the middle. This hole size specification is generally based
on customer requirements.
There are 9 flat washer standards in China, which were approved for
release from 2000 to 2002 GB/T 97.3-2000, GB/T 5286-2001,
GB/T95-2002, GB/T 96.1-2002, GB/T 96.2 -2002, GB/T97.1-2002,
GB/T97.2-2002, GB/T97.4-2002 and GB/T5287-2002 flat gasket
standards.
According to the performance level of flat washers, I recommend
using materials:
For the 100HV class available with ST12, ST13 and Q235, Q215, Q195,
etc., the surface hardness can reach about 110HV;
For the 140HV class with optional 08F, 08Al and 10, 10F, etc., the
surface hardness can reach about 140HV;
For the 200HV and 300HV grades, 45, 50, 60, 70 or 65Mn steels
should be used. They can be quenched and tempered by heat treatment
to 200-300HV and 300-400HV technical requirements.
The Role of Flat Mat
1. Increase the contact area between the screw and the machine.
2. Eliminate damage to the surface of the machine when the spring
pad is unloaded. When used, it must be a spring pad and a flat pad.
The flat pad is facing the surface of the machine. The spring pad
is between the flat pad and the nut.
Flat pad standard
National standards are different.
Here is the United States flat pad standard:
| Specification | Minor Diameter | Outside Diameter | Thickness Tolerance | Thickness Tolerance Disintegration |
| USS 3/16 | 6.22～6.73 | 14.15～14.66 | 0.91～1.65 | 0.91～1.40 |
| 1.40～1.65 | ||||
| USS 1/4 | 7.80～8.31 | 18.47～19.02 | 1.30～2.03 | 1.30～1.65 |
| 1.65～2.03 | ||||
| USS 5/16 | 9.40～9.91 | 22.05～22.99 | 1.63～2.64 | 1.63～2.20 |
| 2.20～2.64 | ||||
| USS 3/8 | 11.00～11.51 | 25.22～26.16 | 1.63～2.64 | 1.63～2.20 |
| 2.20～2.64 | ||||
| USS 7/16 | 12.57～13.08 | 31.57～32.51 | 1.63～2.64 | 1.63～2.20 |
| 2.20～2.64 | ||||
| USS 1/2 | 14.15～14.60 | 34.75～35.69 | 2.18～3.35 | 2.18～2.70 |
| 2.70～3.00 | ||||
| 3.00～3.35 | ||||
| USS 9/16 | 15.75～16.26 | 37.13～38.07 | 2.18～3.35 | 2.18～2.70 |
| 2.70～3.00 | ||||
| 3.00～3.35 | ||||
| USS 5/8 | 17.30～18.24 | 44.27～45.21 | 2.74～4.06 | 2.74～3.20 |
| 3.20～3.60 | ||||
| 3.60～4.06 | ||||
| USS 3/4 | 20.45～21.39 | 50.62～51.56 | 3.10～4.50 | 3.10～3.60 |
| 3.60～4.20 | ||||
| 4.20～4.50 | ||||
| USS 7/8 | 23.65～24.58 | 56.97～57.91 | 3.45～4.88 | 3.45～4.00 |
| 4.00～4.30 | ||||
| 4.30～4.88 | ||||
| USS 1 | 26.80～27.74 | 63.32～64.26 | 3.45～4.88 | 3.45～4.00 |
| 4.00～4.30 | ||||
| 4.30～4.88 | ||||
| USS 11/8 | 31.57～32.51 | 69.67～70.61 | 3.45～4.88 | 3.45～4.00 |
| 4.00～4.30 | ||||
| 4.30～4.88 | ||||
| USS 11/4 | 34.75～35.69 | 76.02～76.96 | 3.45～4.88 | 3.45～4.00 |
| 4.00～4.30 | ||||
| 4.30～4.88 | ||||
| USS 13/8 | 37.85～39.24 | 82.30～83.69 | 3.89～5.41 | 3.89～4.40 |
| 4.40～5.00 | ||||
| 5.00～5.41 | ||||
| USS 11/2 | 41.02～42.42 | 88.65～90.04 | 3.89～5.41 | 3.89～4.40 |
| 4.40～5.00 | ||||
| 5.00～5.41 | ||||
| USS 15/8 | 44.20～45.59 | 95.00～96.39 | 3.89～5.41 | 3.89～4.40 |
| 4.40～5.00 | ||||
| 5.00～5.41 | ||||
| USS 13/4 | 47.37～48.77 | 101.35～102.74 | 3.89～5.41 | 3.89～4.40 |
| 4.40～5.00 | ||||
| 5.00～5.41 | ||||
| USS 17/8 | 50.55～51.04 | 107.70～109.09 | 3.89～5.41 | 3.89～4.40 |
| 4.40～5.00 | ||||
| 5.00～5.41 | ||||
| USS 2 | 53.72～55.12 | 114.05～115.44 | 3.89～5.41 | 3.89～4.40 |
| 4.40～5.00 | ||||
| 5.00～5.41 |
Hardware Spring Flat Fender Washer , Metric Metal Spacer Washers Flat Ring Gasket
Inquiry Cart
0