Nylon Elevator Screw Expansion Anchor Bolt Hex Nut For Slope Stabilization

Nylon Elevator Expansion Anchor Bolt With Hex Nut For Slope Stabilization

Product Description:

Size: M6-M48 ;

Length: 30-300 ;

Surface treatment: black coating, electroplate, painting, phosphatizing

Galvanizing technique: hot dipped galvanized , powder coating, zinc electric,

Thread : full , half, coarse thread, fin pitch thread,

Pitch: MF/UNC/UNF/UNEF

Grade: 4.8；6.8；8.8; 10.9; 12.9;

Standard : DIN/GB/EN/ASME

Material : steel C45, Q235, C20 ;

Alloy steel: SCM435, 20Mn TiB , 35CrMo, 42CrMo ;

Usage :　foundation connection, cable connecting, construction buildings, high-way fencing, vehicle accessories;

The product model of expansion anchor bolt include M6~M24.It is produced according to the standard of GB14-88.The main parameters of products include hardness classes 4.8,thread tolerances 4h, length range 60~15mm, surface treatment Electro galvanizing.

Product Parameters:

Expansion Bolt Specifications Indicate:

Bolt Size M14 indicates a metric thread of 14mm thread. M stands for "metric, metric" thread. The complete thread mark is made up of: Thread Feature Code + Size Code + Tolerance Band Code + and Other Information + Standard Code(Such as: on the domestic screws plus GB code)

1, the thread characteristics of the code letter "M"

2, size code
Single-thread size code for the "nominal diameter × torque." Coarse thread can be omitted marked with its screw moment. Multi-thread size code for the "nominal diameter × Ph lead P-torque."

3, the tolerance zone code by the number of letters (the upper thread of the female thread, the lower case of the male thread), such as 7H, 6g, etc., should be particularly pointed out that 7H, 6g and so on behalf of thread tolerances, and H7, g6 represent cylinder tolerance Code

4, the provisions of the screw length of the short (with S), in (with N), long (L) three. Under normal circumstances, do not mark the screw thread length, the thread tolerance band to determine the length of the medium length (N). If necessary, add a spin length code S or L, eg "M20-5g6g-L". Special needs, you can indicate the value of the spin-on length, such as "M20-5g6g-30".

5, left-hand thread should be marked with "LH" after the length of the screw. Sewing length code and spin code with "-" separated, right-hand thread omitted Note.

6, mark example:
M 16-5g6g said ordinary coarse thread, the nominal diameter of 16, right-hand, thread tolerance with a diameter of 5g, diameter 6g, screw length according to the medium length to consider.
M16 × 1 LH-6G said fine teeth ordinary thread, nominal diameter 16, pitch 1, left-hand, thread tolerance band diameter, diameter are 6G, screw length according to medium length consideration.

Handan city Yongnian District Maide Fasteners Co. Ltd

Handan Maide Fastener Co.Ltd has own factory and the factory has over 15years experience in fasteners products. Our factroy occupied5000 square meters,and located in the largest distribution center of fasteners--Yongnian district，North of Handan in Hebei.

We mainly produce DIN,GB,ISO,ASTM hex nuts ,hex bolts,flat washers and so on.Our company always adhere the business philosophy of the people as base,the market as core and keep learning the high -quality management experience from successful enterprise and introducing advanced technology at home and abroad.

In addition，Our company promise with our excellent reputation and good service attitude that we will provide high quality of products and good after-sales service to the domestic and overseas customers, warmly welcome new and existing clients to visit our company to negotiate.