

Add to Cart
Cat MX50 and Yanmar B5X Dumper Rubber Tracks Size 420X100X54
1. Characteristic for the rubber track
Rubber tracks insulate machine and operator from vibration,
extending the machine's lifetime and lowering operate fatigue.The
ground pressure of rubber tracks equipped machinery can be fairly
low, about 0.14-2.30 kg/ cmm, a major reason for its use on the wet
and soft terrain.The added traction of rubber, track vehicles
permits them to pull twice the load of wheel vehicles of the sane
weight.Rubber tracks cause less damage to roads than steel tracks,
and less rutting of soft ground than either steel tracks of wheel
products.
2. Production
All track production equipment is designed on site by qualified engineers according to stringent criteria in terms of quality and productivity. The whole team works hard to improve manufacturing processes in order to ensure performance and reliability of the tracks.
4. Notices of using rubber tracks
Improper driving operation is the most important factor of rubber
track damage, so in order to protect the rubber track and prolong
the service life, users must pay attention to the following points
when using the machine:
(1) It is forbidden to walk under overload. When overloaded, it
will increase the tension of the rubber crawler and accelerate the
wear of the iron core. In severe cases, the core iron breaks and
the steel cord breaks.
(2) Do not make sharp turns while walking. Sharp corner can easily
lead to off-track damage to the track, but also the guide wheel or
anti-off guide rail impact core iron core fall off.
(3) Forbid climbing the steps forcibly, this will make the root of
the pattern to have the crack, in case of serious breaks of the
steel cord.
(4) It is forbidden to frictionally walk on the edge of the step.
Otherwise, the edge of the crawler will be swept away and interfere
with the body, causing scratches and cuts on the edge of the
crawler.
5. More brand and model this size can fit
MODEL | ORIGINAL SIZE | REPLACEMENT SIZE | ROLLER |
MX50 (CAT) | 420X100X54 | 420X100X54 | A1 |
MX55 (CAT) | 420X100X54 | 420X100X54 | A1 |
MXR50 (CAT) | 420X100X54 | 420X100X54 | A1 |
MXR55 (CAT) | 420X100X54 | 420X100X54 | A1 |
N550.2 (HANIX) | 420X100X54 | 420X100X54 | A1 |
S&B225 (HANIX) | 420X100X54 | 420X100X54 | A1 |
S&B25 (HANIX) | 420X100X54 | 420X100X54 | A1 |
S&B25R (HANIX) | 420X100X54 | 420X100X54 | A1 |
S&B25S (HANIX) | 420X100X54 | 420X100X54 | A1 |
S&B30 (HANIX) | 420X100X54 | 420X100X54 | A1 |
S&B30R (HANIX) | 420X100X54 | 420X100X54 | A1 |
S&B30S (HANIX) | 420X100X54 | 420X100X54 | A1 |
S&B330 (HANIX) | 420X100X54 | 420X100X54 | A1 |
S&B500 (HANIX) | 420X100X54 | 420X100X54 | A1 |
S&B550 (HANIX) | 420X100X54 | 420X100X54 | A1 |
S&B580 (HANIX) | 420X100X54 | 420X100X54 | A1 |
K50SR (KUBOTA) | 420X100X54 | 420X100X54 | A1 |
KH50SR (KUBOTA) | 420X100X54 | 420X100X54 | A1 |
KH51SR (KUBOTA) | 420X100X54 | 420X100X54 | A1 |
KH52SR (KUBOTA) | 420X100X54 | 420X100X54 | A1 |
550 (MINIEX) | 420X100X54 | 420X100X54 | A2 |
MX55(MITSUBISHI) | 420X100X54 | 420X100X54 | A1 |
MXR50(MITSUBISHI) | 420X100X54 | 420X100X54 | A1 |
MXR55(MITSUBISHI) | 420X100X54 | 420X100X54 | A1 |
N550.2(NISSAN) | 420X100X54 | 420X100X54 | A1 |
S&B225(NISSAN) | 420X100X54 | 420X100X54 | A1 |
S&B25(NISSAN) | 420X100X54 | 420X100X54 | A1 |
S&B30(NISSAN) | 420X100X54 | 420X100X54 | A1 |
S&B30R(NISSAN) | 420X100X54 | 420X100X54 | A1 |
S&B30S(NISSAN) | 420X100X54 | 420X100X54 | A1 |
S&B330(NISSAN) | 420X100X54 | 420X100X54 | A1 |
S&B500(NISSAN) | 420X100X54 | 420X100X54 | A1 |
S&B550(NISSAN) | 420X100X54 | 420X100X54 | A1 |
S&B580(NISSAN) | 420X100X54 | 420X100X54 | A1 |
B5X (YANMAR) | 420X100X54 | 450X100X54 | B1 |
BSX (YANMAR) | 420X100X54 | 420X100X54 | A1 |
YB551XB (YANMAR) | 420X100X54 | 420X100X54 | A1 |
6. Warehouse