Battery Charge Function Telecom Rectifier System Hot Swappable ISO9001 CE Certification

Battery Charge Function Telecom Rectifier System Hot Swappable ISO9001 CE Certification

Quick Details:

Payment & Shipping Terms:

1. GPE48150G System Configuration

The system consists of distribution unit, rectifier module (1 min.,5 set max.) and monitoring module. The configuration is optional, as following table:

2. Operating Principle

AC mains is first input AC-INPUT MCB and then fed into the rectifier module after the SPD and EMI filtering. AC-INPUT acts as protection to over load and short circuit to AC power. The LOAD1-,LOAD2-,LOAD3-,LOAD4-,LOAD5- link in series to 2 power-off contactors KM1,KM2.The user’s battery is connected to the DC output side through MCB BAT and KM2, and the MCB provides disconnection control, over-load and short-circuit protection to the battery.

Under normal conditions, every parameter of rectifier modules and distribution unit are controlled by the monitoring module, operating according to the pre-set parameter or user’s commands. If AC mains fault, the battery will power to the system. With the battery discharge, the terminal voltage of the battery starts to descend. When the voltage is under -47V±0.5V, the monitor reports DC under voltage alarm signal and when the voltage is under -46.0V±0.5V (adjustable), the KM1cuts off LOAD3-,LOAD4-,LOAD5- and retaining power to LOAD1-,LOAD2-. If the voltage drops to -43.0V±0.5V (adjustable), the KM2 will cut off output of LOAD1-,LOAD2- and then the power system will stop working. If the external AC mains recovers, the system will normally work again. (All above monitoring data are system default values and can be reset by user).
Except for battery over-discharge protection, battery or load over-temperature protection is prohibitive under default setting, users can send command to activate or inactivate according to the demanding. To avoid the thunder and thunder surge pulse current break the power system, and match to the thunder protection module ideally, we must load decoupler on output port independently or keep some length cable.

3. GPE48150G Properties

4. Electric Connection

Chassis connects with external electric through system interface board. As shown in figure below:

Cable connetors descriptions:

(1) N is the natural wire, L is the live wire,PE is the ground wire

(2) B1- and B2- is the BATT (-),B1+ and B2+ is the BATT (+)

(3) 1-,2-,3-,4-,5- are LODA1, LODA2…LODA5 load (-)

(4) 1+,2+,3+,4+,5+ are LOAD1, LOAD2…LOAD5 load (+)

5. Application

(1) Small scale program controlled exchanges

(2) Access network

(3) Transmission equipment

(4) Mobile communication

(5) Satellite communication ground station

(6) Microwave communication

6. Features

(1) Adoption of active power factor compensation technology with factor >0.98

(2) Wide operating range of AC input voltage: 90～280Va

(3) Operating temperature range: -25°C～+55°C

(4) Zero current/voltage switching tech with high efficiency ≥92%

(5) Perfect battery management prolongs battery lifetime: charge/discharge management, battery temperature compensation, battery capacity test, low-voltage protection

(6) Hot-swappable

(7) Input under/over voltage protection

(8) Output over voltage protection

(9) Output over current protection

(10) Output short circuit protection

(11) Auto current sharing, parallel operation

(12) Embedded mounted

(13) Perfect surge protection function 20KA (8/20 US)

7. Packing and Shipping

Our Delivery Agent

The goods can be shipped by sea, by air, by courier, by land, by train, etc.
Besides the following delivery agent, we can also look for the delivery agent with the best price in china if you need us to do for you.

8. Our Contact Information

Mobile Phone: 0086-13752765943
Telephone: 0086-0755 66600941

Email: info@estel.com.cn

lxf.estel@hotmail.com
Skype: fiona.liang10

Introduction

Tianjin Estel Electronic Science and Technology Co., Ltd (ESTEL(GUANGDONG)TECHNOLOGY CO., LTD), located in China, is a professional supplier of integrated outdoor telecom cabinet and temperature control solutions for outdoor telecom base station. As a science and technology innovative company, we engage in the R&D, manufacture, and sales of telecommunication equipment. Estel has a well-established team of technical and management experts who can meet customers’ specific needs accurately.

The base station integrated solutions and products include outdoor integrated telecom equipment cabinet, battery cabinet, RRU cabinet, power supply cabinet, environment monitoring system, TEC peltier air conditioner, AC220V compressor air conditioner, DC48V variable frequency air conditioner, heat exchanger, rectifier, UPS, embedded telecom power system etc. All the above solutions and products can be custom made.

Our products and solutions have been deployed all over China. Our main domestic customers are China Telecom, China Mobile, China Unicom, State Grid, Shenzhen / Beijing Metro and Huawei / ZTE etc. In addition, our products have been exported to Europe, North America, South America, Central America, Southeast Asia, Africa, Australia, Mid East countries, etc.

“ Customers First, Quality First ” is always our principle. We have attained many certifications, such as ISO9001, ISO14001, OHSAS18001, CE, UL, FCC etc. AS a telecom integrated solutions / energy saving system integrator in China, We have strong advantages in technology competitiveness, management competitiveness ,service competitiveness and price competitiveness. Through many years of experiences in design, production and implementation of different projects around the world, we have gained great reputation. Relying on professional technique and strict quality control, we will continuously offer high cost-effective products and solutions to our respectable customers globally. We will always try our best to meet customers’ need and requirement.

Company Capability

Trade & Market