Anti Corrosion Powder Coated Thermostatic Outdoor Telecom Cabinet With Front Rear Access

Brand Name:ESTEL
Certification:ISO9001, CE, 3C, FCC, TLC, IP55
Model Number:ET9090210-EQ2D
Minimum Order Quantity:1
Delivery Time:Aboout 20 working days
Payment Terms:T/T, L/C, DA, DP, etc
Contact Now

Add to Cart

Verified Supplier
Location: Shenzhen Guangdong China
Address: 3A-8, SHUIWAN 1979 SQUARE (PHASE II), NO. III, TAIZI ROAD, SHUIWAN COMMUNITY, ZHAOSHANG STREET, NANSHAN DISTRICT, SHENZHEN
Supplier`s last login times: within 35 hours
Product Details Company Profile
Product Details

Anti Corrosion Powder Coated Thermostatic Outdoor Telecom Cabinet With Front and Rear Access


1. Cabinet drawing



2. Cabinet Applications


The cabinet is suitable for outdoor environment, such as road side, park, building roof, mountain area, flat ground, etc.


The cabinet can be installed with base station equipments, power supply equipments, batteries, temperature control equipments, transmission equipments and other equipments, or the cabinet can reserve installation space and heat exchange capacity for the above equipments, providing reliable mechanical and environmental protection for normal operation of the internal equipments.


The cabinet is mainly used in wireless communication base station, such as 4G, communication/network integrated service, access/transmission switching station, emergency communication/transmission


3. Cabinet Features

  • The cabinet is weatherproof, such as sun-proof, dust-proof and waterproof, which is used in outdoor environment.
  • Cabinet cooling: air conditioner and auxiliary direct ventilation fans. MTBF≥50000h.
  • Cabinet load bearing: ≥600kg
  • Ingress protection: IP55( we can also support IP65)
  • The layout of the cabinet is reasonable, which will facilitate cable access, fixing and grounding. There are entrance holes individually for power cable, signal cable and optical cable.
  • All the cables used in the cabinet are made from flame retardant materials.
  • The cabinet includes grounding bar.
  • Surface treatment: degreasing, derusting, rustproof phosphating (or galvanizing), powder coated.
  • Flame retardance: comply with GB5169.7 test A
  • Insulation resistance: the insulation resistance between grounding devices and cabinet body parts is not lower than 2×104M/500V(DC).
  • Withstand voltage: the withstand voltage between grounding devices and cabinet body parts is not lower than 3000V(DC)/1min.
  • Mechanical strength: each surface can bear upright pressure >980N; after the door is open, its outer end can bear upright pressure >200N.

In a word, our Energy Saving Integrated Cabinet can provide complete solutions for outdoor working environment and safety management of telecom base station. As a base station, it can integrate the main equipments, system power supply, AC and DC power distribution, environment monitoring, batteries, lightning protection and grounding devices. As functional cabinet (battery cabinet, power supply cabinet, transmission cabinet etc.), it can help telecom carriers to realize easy station obtaining, energy saving, fast deployment.


4. Cabinet Advantages Introduction



5. Cabinet Specifications


(1) Technical Parameters


ItemTypeTechnical Parameter
StructureDimension

External Dimension: W×D×H 900×900×2100mm

Internal Dimension: W×D×H 800×800×1800mm

Layout1 compartment
Equipment Installation Method19” rack
DoorWith one front door and one back door, and anti-theft three point lock for outdoor cabinet (support padlock)
MaterialGalvanized steel, sandwich structure panel, double wall with heat insulation
Heat InsulationThere are heat insulation between inner wall and outer wall.
Ingress ProtectionIP55
Temperature ControlCoolingAC220V 50Hz air conditioner and DC48V fans
Lightning ProofGrade B lightning proofNominal: 60KA, Max.: 100KA
LightingLED lamp48V LED lamps (immovable), with protective circuit breaker
TemperatureTemperatureWorking Temperature: -40°C ~ +55°C
Storage Temperature: -50°C ~ + 70°C
Transport Temperature: -50°C ~ +70°C
HumidityRelative Humidity5% ~ 100%
PressureAir Pressure62kpa ~ 101kpa (similar to 0m ~ 5000m altitude)
Radiation IntensitySolar Radiation Intensity1120 ×(1±5%)W/m2

(2) Configuration List


No.ItemQuantityUnitSpecs
1Outdoor Telecom Cabinet1Set

(1) External Dimension:W×D×H 900×900×2100mm

Internal Dimension: W×D×H 800×800×1800mm

(2) One compartment: equipment compartment

(3)With one front door and one back door , and anti-theft three point lock for outdoor cabinet (support padlock)

(4) Material: galvanized steel, sandwich structure panel, double wall with heat insulation

(4.1) Cabinet left side, right side and back: sandwich structure panel, outer plate: 0.5mm galvanized steel, inner plate: 0.5mm galvanized steel, insulation: 45mm flame retarded EPS.

(4.2) Cabinet door and base: outer plate: 1.5mm galvanized steel , inner plate: 0.8mm galvanized steel, insulation: 40mm PEF.

(4.3) Cabinet roof: sandwich structure panel (outer plate: 0.5mm galvanized steel, inner plate: 0.5mm galvanized steel, insulation: 45mm flame retarded EPS. ) + 1.0mm galvanized steel.

2Air Conditioner1Set

Cooling capacity: 1500W,

Power supply: AC220V, 50HZ,

Model:TC06-150JFH/01

3Auxiliary Direct Ventilation Fans2PCDC48V
4Environment Monitoring Unit1Set

19", 1U; Power Supply: DC48V

Support RS485 and TCP/IP communication interface

5Water Sensor1PC
6Smoke Sensor1PC
7Temperature and Humidity Sensor1PC
8Door Sensor2PCOne for controlling LED lamp, the other for open door alarm
9LED Lamp1PCDC48V
10Power Distribution Unit1Set

Grade B Lightning Proof

AC Input: 63A/2P *1;

AC Output: 16A/1P*4;

DC Output: 16A/1P*4

Input Voltage: AC220V.

11Package1SetWooden Case

6. Cabinet Details Introduction

6.1 Components Installation

  • LED lamp, LED lamp sensor, smoke sensor and door sensor are installed at the top of the cabinet.
  • Environment monitoring unit and PDU are installed on 19” rack.
  • Water sensor is installed at the bottom of the cabinet.
  • Temperature and humidity sensor is installed at the side inside the cabinet.
  • Air Conditioner and fans are installed on the door of the cabinet.



6. 2 Cable Entry


Feeder cable and other external cables all use bottom wiring method.


6.3 Grounding Protection

  • The cabinet includes grounding copper bar with anti-corrosion coating. There are enough screws for wiring connection terminals.
  • The metal part of the cabinet should be interconnected and be connected with grounding bar. Connection resistance between any two points is lower than 0.1Ω.
  • Protective earthing of other equipments inside the cabinet should be connected to the grounding bar


6.4 Door lock theft proof design


Damage resistance of the theft proof lock meets GA/T 73-1994 “Mechanical Anti-theft Lock” class B requirement, supporting padlock.


Three point lock



6.5 Door Connection and Fastening

The cabinet use inside door hinges,inside installation,inside fixing, no outer screws and embedded cabinet door, these design can protect cabinet against the theft and water access. Use anti-loose threaded connection as structure and bearer connection. Anchor bolt for fixing cabinet use hot dip galvanized bolts.



6.6 Surface Treatment

The surface of cabinet is made of special outdoor anticorrosive powder coating, the color is grey.


7. Cabinet Pictures



8. Cabinet Wooden Case Packing



China Anti Corrosion Powder Coated Thermostatic Outdoor Telecom Cabinet With Front Rear Access supplier

Anti Corrosion Powder Coated Thermostatic Outdoor Telecom Cabinet With Front Rear Access

Inquiry Cart 0