CQC/CE MPT50-12V AC/DC Single-Group Output Industrial Control Flat Power Supply
Brand Name:ESTEL
Certification:ISO9001, CE, 3C, FCC, TLC
Model Number:MPT35-12V
Minimum Order Quantity:1
Delivery Time:7-10 working days
Payment Terms:T/T
Contact Now
Add to Cart
Verified Supplier
Location:
Shenzhen Guangdong China
Address:
3A-8, SHUIWAN 1979 SQUARE (PHASE II), NO. III, TAIZI ROAD, SHUIWAN COMMUNITY, ZHAOSHANG STREET, NANSHAN DISTRICT, SHENZHEN
Supplier`s last login times:
within 35 hours
Product Details
Company Profile
Product Details
CQC/CE MPT50-12V AC/DC Single-Group Output Industrial Control Flat Power Supply
1. CQC/CE MPT50-12V AC/DC Single-Group Output Industrial Control Flat Power Supply Input Characteristics
| Input voltage range | 85-264Vac/120~370Vdc |
Input voltage frequency | 47-63 Hz |
input currenton | MAX. 0.95A @115 Vac, MAX. 0.56A @230 Vac |
surge current | <45A @ 230Vac |
leakage current | <0.25mA (RMS)/3.5mA(RMS) |
2. CQC/CE MPT50-12V AC/DC Single-Group Output Industrial Control Flat Power Supply Output Characteristics
MPT50-12V | MPT50-24V |
12V | 24V |
10.2~13.8V | 21.6~28.8V |
| 4.2A | 2.2A |
±0.5% | ±0.5% |
| ±0.5% | ±0.5% |
≤120mVp-p | ≤150mVp-p |
≤3s @ 115Vac；≤3s @ 230Vac | |
≤50ms @ 115Vac；≤50ms @ 230Vac | |
≥45 ms @ 230Vac | |
3. MPT50-12V AC/DC Single-Group Output Industrial Control Flat Power Supply Physical characteristics:
Dimension | 100 X 82X 30.1mm (L * W * H) |
Weight | About 222g |
Cooling mode | Natural air cooling |
4. MPT50-12V AC/DC Single-Group Output Industrial Control Flat Power Supply Safety regulation
| Safety standards | IEC/EN62368-1,UL 62368-1,GB4943.1 |
| Shock protection | Class I |
| Class of protection | IP20 |
| Insulation impedance | Input-output :≥100MΩ (measured with DC500V at room temperature) Input - Ground :≥100MΩ (measured with DC500V at room temperature) Output - Ground :≥100MΩ (measured with DC500V at room temperature) |
| Insulation strength | Input-output :AC 3KV 50Hz 1 minute ≤10mA Input - Ground :AC 1.5KV 50Hz 1 minute ≤10mA Output - Ground :AC 0.5KV 50Hz 1 minute ≤10mA |
5. MPT50 Power Supply Payment & Shipping Terms
| Minimum Order Quantity: | 1 set |
| Price: | negotiation |
| Payment Terms: | T/T |
| Supply Ability: | 20,000 sets per month |
| Delivery Time: | 7-10 working days |
| Packaging Details: | carton/wooden case |
6. Products images:
Note :
1. Unless otherwise specified, the above parameters are tested
under the conditions of ambient temperature
25℃, humidity 50%, 100% load and input voltage 230Vac;
2. When working above 2000 meters above sea level, the load is
derated by 7%/1000 meters;
3. Ripple and noise measurement method: use a twisted pair wire
about 10mm long, and the terminal should
be connected in parallel with 0.1uf and 10uf capacitors, and
measure under 20MHZ bandwidth;
4. The start time is measured in the cold start state, and rapid
and frequent switching may increase the start
time;
5. The power supply should be considered as part of the components
in the system. All EMC tests will be
conducted with the test sample mounted on a metal plate with a
thickness of 1mm and a length of 300mm by
a width of 300mm. Verify the electromagnetic compatibility of the
power supply with the terminal device;
6. When the product terminal is used, the shell must be connected
to the system;
7. The test methods of all indicators in this guide are tested
according to the company's standards.
CQC/CE MPT50-12V AC/DC Single-Group Output Industrial Control Flat Power Supply
Inquiry Cart
0