

Add to Cart
350W 500W Solar Cells Production Line Testing Machine for Solar Panel
Brief Introduction
The Solar Module Tester equipment is specially used in the
filtration of solar energy mono-crystalline silicon and the
poly-crystalline silicon cell pieces. Through stimulates the solar
spectrum lamp-house,carries on the testing and surveys to the cell
module related electrical parameter,according to the measurement
result classifies the cell piece.
Solar Panel Flash Tester has unique apparatus of modifying,to input
the compensate parameter,it will carries on
automatically/manual temperature compensation and compensate with
the light intensity,and automatically measures and modifies the
temperature. Based on the Windows operation surface,and
humanized-design testing software,it records and displays test
curve(I-V curve,P curve) and the test parameter(Voc,
Isc,Pm,Im,FF,EFF), the test of sequence number is automatically
produced and preserved to the assigned folder.
Specification:
Model | QA-SPT |
Equipment dimension | 2500mm×1470mm×1330mm |
Transmission mode | timing belt transporting components |
Testing size | 2000mm×1200mm |
Testing speed | 30s/piece |
Testing temperature range | 0~50℃(measurement accuracy 0.1℃ )Infrared Temperature Measurement measures the temperature of battery slice directly |
Flash time | 0~100ms, continuous adjustable range 0~100ms, stepping 1ms |
Irradiance and uniformity | ±2% |
Irradiance and stability | ±2% |
Testing repeat accuracy | ±0.05% |
Advantages
1, This solar cell module tester adopts the horizontal box and
downward irradiation optical designs, suitable for the electrical
performance of PV modules intermediate testing and final
inspection;
2, Pulsed Xenon lamp imported from Germany. Special optical filter
components to ensure the correct of testing light spectrum for long
lifetime;
3, The PV Module Testing System equipment displays good performance
with the constant light intensity in the test interval to ensure
true and reliable test data. Strobe pulse width rang 0 ~ 100 ms
continuously adjustable, min step 1ms, adapt to different solar
cell module measurements;
4, Digital controlling interface to ensure test accuracy, hardware
technical parameters programmable. Equipment commissioning and
maintenance is highly simplified;
5, Adopt 2M×4 channels high-speed synchronous capture card,
displaying more details with test curves, actually reflecting the
conditions of tested module;
6, Use of infrared temperature measurement, truely reflecting the
temperature changes of solar modules as well as automatically
temperature compensation.
7, Automatic control to check the real-time working conditions of
the solar modules and main circuit units throughout the test
interval, and provides hardware / software protection to ensure
reliable operation of the device;
8, The unique number counting function with flashes is viable for
our panel module Test .
Solar Panel:
Higher solar module efficiency lower solar system cost per watt
New Design, 5BB Full Cell, Monocrystallion silicion Higher cells efficiency, better light converting rate
Solar Panel Dimension: 1640*992*35mm, high winds (2400PA) and snow loads (5400PA)
Maximum Power: 335W, voltage at Pmax: 34.00V, current at Pmax: 9.85A
Warranty: 25-year transferable power output warranty
Parameters of 60Cells Monocrystalline Solar Panels Mono 30V 335W High Efficiency PV Module | |||||
Module | 315M-60 ~ 335M-60 | ||||
Encapsulation | Class/Eva/Cell/Eva/Backsheet | ||||
Maximum Power Pmax(W) | 315 | 320 | 325 | 330 | 335 |
Maximum Power Voltage(Vmp/V) | 33.20 | 33.40 | 33.60 | 33.80 | 34.00 |
Maximum Power Current(Imp/A) | 9.49 | 9.58 | 9.67 | 9.76 | 9.85 |
Open Circuit Voltage(Voc/V) | 40.60 | 41.00 | 41.30 | 41.60 | 41.80 |
Short Circuit Current(Isc/A) | 10.05 | 10.14 | 10.23 | 10.30 | 10.39 |
Cell Efficiency(%) | 21.37 | 21.71 | 22.05 | 22.38 | 22.72 |
Module Efficiency(%) | 19.36 | 19.67 | 19.98 | 20.28 | 20.59 |
Power Tolerance(W) | 0~+5W | ||||
Temperature Coefficient of Isc(αIsc) | +0.059%/ºC | ||||
Temperature Coefficient of Voc(βVoc) | -0.330%/ºC | ||||
Temperature Coefficient of Pmax(γVoc) | -0.410%/ºC | ||||
STC | Irradiance 1000w/m2, Cell Temperature 25ºC, Air Mass 1.5 |