6202 (HT6202T) Double component heat curing epoxy potting Compound for Automobile ignition coil

1.Product identification

Product Name: HT-6202T two-component epoxy potting adhesive

Manufacturer / supplier: Shanghai Huitian new material Co., Ltd.

Address:No. 251 Wenji Road Songjiang Shanghai China(Post Code: 201600)

Telephone:021-57743399

2．Components / component information

Chemical name CAS# %(Weight ratio)

A Components

DGEBAEpoxy resin 25068-38-6 25-35

Diluent / 5-10

Silicon powder / 60-70

B Component

Modified anhydride / 70-80

Accelerator / 1

3．Risk overview

Risk classification: non hazardous chemicals

Skin contact: may cause irritation and allergic reactions.

Eye contact: may cause irritation.

Inhalation: Stream produced by heating may make irritation to the respiratory tract. In the room tempreture, adhesive excluding volatile matter, No inhalation hazard.

Ingestion: ingestion of harmful

4. First aid measures

Skin contact: take off contaminated clothing, immediately wash with water and soap.

Eye contact: rinse with water. And asap go to hospital.

Inhalation: from exposure to fresh air. If necessary go to hospital.

Ingestion: generally does not require treatment, taking large amount should be hospitalized.

5．Fire protection measures

Flash point: not determined,>130℃.

Fire extinguishing agent: water spray, foam, dry powder, carbon dioxide.

Special fire protection measures: to prevent inhalation of smoke. Wear positive pressure self-contained breathing apparatus. Water can reduce the smoke density.

Hazardous combustion products: COx, and other organic matter.

Combustion limit: no data.

6．Leak emergency measures

Don't touch the skin. As far as possible leakage glue clean. Use solvents or soapy water to clean the residue. Waste is placed in an appropriate container, processing according to local laws and regulations.

7．Job handling and storage

Handling: Do not contact with skin and eyes.

Storage: This product should be stored in low temperature shade. Keep away from fire and heat source.

8．Controls / personal protection contact

Ventilation: the conventional mechanical ventilation.

Occupation contact limiting value

Silicone rubber: not specified

Eye protection: protective glasses or safety glasses.

Hand protection: rubber or plastic gloves.

Respiratory protection: generally do not need, using certified respirator when necessary.

9．Physical and chemical properties

Traits: grey fluid colloid.

Boiling point: no data

Solubility: insoluble in water, soluble in hydrocarbon solvents.

Relative density (=1): 1.6-1.8

Vapor density: no data

10．Stability and reactivity

Chemical stability: stable under normal conditions.

Conditions to avoid: This product and the curing agent reacts.

Incompatible materials: strong oxidant, strong acid, strong alkali.

Hazardous decomposition products (non thermal): No.

Hazardous polymerization: generally does not occur.

11．Toxicological information

Acute toxicity (epoxy resin):

The rats by LD50:11400 mg/kg.

Rabbit percutaneous LD50:> 20 ml/kg.

Carcinogenicity: not included in the IARC list of carcinogens.

Allergic: can cause skin allergies.

12．Ecological information

No data

13．Disposition

Waste disposal instructions: to comply with local environmental regulations

14．Transport

Domestic (CN-GB), International (IMO, IATA, UN) were not specified. Non dangerous goods.

Huitian New Material (stock code: 300041) is the oldest enterprise in China's adhesive & new material industry, with 46 years of development history, focusing on research and development, constantly breaking through the innovative technology of adhesive new material, taking the lead in solving the problem of necklace. With over 2,000 products spanning six disciplines, our offerings find extensive application in new energy, transportation, 5G communication, consumer electronics, aerospace, and beyond. We are committed to delivering new material one-stop solutions for high-end manufacturing industry head customers.

Huitian New Material has 6 R&D bases in Shanghai, Guangzhou, Xiangyang, Yicheng, and Changzhou, as well as industrial bases in Vietnam, providing customers with a stable supply of multi-series, high-quality products, and possessing a large-scale manufacturing capacity; the existing core R&D team consists of more than 300 people with PhDs and master's degrees, and it is the first "National Enterprise Technology Centre" in the domestic adhesive new material industry. Huitian New Material has been continuously investing in R&D for a long time, a joint development with customers, and forward-looking product reserve, constantly refining sustainable R&D capability; Huitian people's high-efficiency organizational force quickly responds to customers' needs and empowers and adds value to customers' products.

Huitian New Material was founded in 1977. Its predecessor was the earliest domestic research unit engaged in the research and development of adhesives. It is also a private high-tech enterprise transformed by a batch of research institutes in the country according to market-oriented operation. The company has a deep professional and technical accumulation and has been identified as a provincial-level post-doctoral industrial base and a national-level post-doctoral scientific research workstation.

In 2012, Huitian and the Chinese Academy of Sciences jointly set up the "High-Performance Adhesive Material Engineering Technology Center".

In 2013, Huitian Group inaugurated a new base and R&D center at its Shanghai headquarters to create a world-class adhesives R&D center.

In 2015, Huitian was awarded the National Enterprise Technology Centre jointly recognized by the National Development and Reform Commission, Ministry of Science and Technology, Ministry of Finance, General Administration of Customs, and General Administration of Taxation.

In 2017, Huitian Vietnam Yueyou Co., Ltd was established to start the road of overseas expansion.

In 2019, the Huitian Group set up overseas offices in Europe, America, and Southeast Asia to accelerate its overseas business development.

In 2022, Huitian New Material Japan Co., Ltd was founded and Huitian Vietnam Yueyou Co., Ltd opened a new office in the north part.

In 2023, Vina Evergreen Advanced Material Company Limited was established to invest in the overseas market, localization starts at the same time as internationalization.

In 2024, the Vietnamese factory of Huitien New Material starts production in BW Industrial Zone, Hai Duong, Vietnam, taking the first step toward overseas production.

Huitian New Materials has successively won the key high-tech enterprises of the National Torch Plan, China's well-known trademarks, China's Top 10 Most Valuable Investment Values, China's Adhesive Products Customer Satisfaction Brand, China's Top Ten Innovative Materials Enterprises, Patent Pilot Enterprises, and A series of precious honors such as honest taxpayer unit. The company has donated more than 20 million yuan to society and won the "Outstanding Contribution Award for Chinese Charity" twice.

Vision

Become the preferred expert for customers in adhesives and new materials

Bent on catching up with the world's advanced-level

Mission

Industry Serves the Country, Repays the Society

Values

Customer-centric, striver-oriented

Long-term hard work and continuous self-criticism

Culture

Competition, Reward, Innovation, Gratitude