Hydraulic Pump seal kits

How to prevent oil leakage in sealing elements of a breaking hammer and the solution to it.

Situation No. 2: there is something wrong with the sealing elements:

1. Surface of piston seals and rod seals hardens, surface of motion fractures

Reason: abnormally too high speed working pressure

2. Surface of piston seals and rod seals hardens and the whole sealing elements fracture

Reason: hydraulic oil goes bad; ozone generated by oil of too high temperature damages seals, and thus causes leakage.

3. Surface of piston seals and rod seals is worn smoothly like a mirror,

Reason: little motion in cylinders, but high oil pressure and short distance of travel.

4. The worn surface of piston seals and rod seals is uneven, and seals dissolve and swell,

Reason: lateral pressure is too high; eccentricity is too large, and unsuitable oil and cleanout fluid are used.

5. piston seals and rod seals surface of motion are worn and there is polishing scratch

Reason: poor electroplating, rusting, matching surface is too rough; and piston rod of unsuitable material, which contains impurity, is used.

6. Top of edge of piston seals and rod seals fractures and there is indentation.

Reason: angle of chamfer, method of installation, storing are improper.

7. There is indentation on piston seals and rod seals surface of motion;

Reason: there are impurities.

8. Edge of piston seals and rod seals cracks;

Reason: improper usage of oil, working temperature is too high or too low, backpressure and pulsating frequency is too high.

9. Piston seals and rod seals are carbonized, scorched and go bad.

Reason: residual air and thus causes adiabatic compression.

10. Main oil seal extrusion heel cracks

Reason: pressure too high, extrusion gap too big, back-up ring is improperly used, groove design is unreasonable.

GDK SEALS is engaged in the seals production, R&D and trade for more than ten years, now we are a manufacturer and exporter specialized in the research, development and production of engineering machine seals, and already become the authorized the dealer for the SKF SEALS in China,meanwhile, supply with Japan seal kit, hydraulic breaker seal kits, excavator seal kits, cylinder bushing, pusher, Korean seal, diaphragm, excavator O-ring etc.

We are located in the biggest international machine market of guangzhou with convenient transportation. All of our products comply with international quality standards and are greatly appreciated in a variety of different markets throughout the world for years.

Applying modern management mode and innovative marketing mode, with consistent best quality, we offer our new and old customers the best timely and thoughtful services. Following the principle: to strive for survival by good quality, to win the market with well reputation, we are in pursuit of a broader development. GDK invites you to join us for a joint development and to create a new brilliant future!