Product Details
Domestic Battery Operated Floor Scrubber / Hard Wet Floor Scrubbing
Machines
Battery Operated Floor Scrubber introduction
- The big wheel of the machine is double bearing, low noise and
wear-resistant professional wheel. We can provide one year
guarantee. In cooperation with current customers, it seldom occurs
damaged too early because of the quality problems.
- Anti splash apron, we are using high quality PVC material, with
acid alkali resistance, oil resistance characteristics, replacement
is also more convenient, no need to change within one year.
- with independent key switch, it can provide personal management and
emergency shutdown.
- with excellent battery management system, real-time display battery
power, effectively ensure that the battery works under safe
electricity conditions, if the electricity is lower than the
requirements, the system will automatically alarm and remind and
automatically shut down the motor to ensure battery life;
- with independent brushes and suction control switches and working
status lights, which can effectively control the machine's work.
- with accumulated working hours function, it provide the effective
data with management.
- FS45 floor scrubber with the water level induction system of the
recovery tank. When the water level of the recovery tank reaches
the specified position, no operator is required to do anything. The
machine will automatically shut down the suction motor to prevent
the water entering the suction motor, so as to ensure the service
life of the suction motor.
- FS45 floor scrubber with unique installation mode of suction motor
to prevent water enter into it effectively, and it can improve
service life of suction motor.
- FS45 squeegee adopt pressure suspension system, squeegee under the
suspension pressure system can effectively adapt to the floor
change, maintain the best water suction, steel squeegee has its
unique advantages, we configure the LINATEX rubber blade, so that
the machine's water suction effect and the wear resistance of the
rubber blade can be the same as the brand machine.
Battery Operated Floor Scrubber Advantages
- compact design, especially suitable for small and medium-sized
places
- low noise design, prevent water inlet motor installation method,
ensure maximum service life of motor.
- Many colors are available, it is easy to find your prefer machines.
Battery Operated Floor Scrubber parameters
Model | FS45 Battery Operated Floor Scrubber |
Brush Dia.(mm) | 510mm(A)/460mm(B) |
Squeegee Width(mm) | 800 |
Solution Tank(L) | 40 |
Recovery Tank(L) | 45 |
Brush Driving Mode | metal gear reduce |
Brush Speed(rpm) | 180 |
Brush Motor(W) | 550 |
Suction Motor(W) | 550 |
Efficiency(m2/h) | 1800 |
Installed power | 24V |
Battery | 12Vx2 100Ah |
Dirty water level sensor | Yes |
Driving speed adjust | Yes |
loading | 34pcs/20ft |
| 72pcs/40GP |
Feedback
Jun: Our challenge was to provide quality yet affordable floor
scrubber machine. Dycon provided a wide variety of their products
that gave a good-looking and effective interface. The floor
scrubber provided all the functionality we needed.
David: I would like to express my deepest appreciation to you after
working with your company for three years.Thanks to our
cooperation. Our company, which had started from zero, became one
of the most leading suppliers of all range of cleaning equipment.
Therefore, I would like once again to thank your company and the
staff for being so efficient, cooperative and loyal.
Jeff: Dycon is the brand! More power to you and looking forward to
a stronger mutually beneficial business partnership in the next
century!
Battery Operated Floor Scrubber Details
Company Profile
Dycon Cleantec Co.,Ltd.., is the professional producer for floor
scrubber dryer in China, also the member of the ISSA(Worldwide
Cleaning Industry Association).Dycon is committed to R&D and
producing cleaning equipments, with independent product development
capability. We are also accept OEM and ODM product development.
Dycon focuses on designing and producing floor scrubber dryer, pay
attention to quality. All the machines are designed by our own, the
metal chassis is cutting by Laser, which brings precision and high
interchangeability of spare parts. Our products absorbs the
international mainstream product advantages, synchronized with
worldwide style. With CE approved, our products enjoy a good
reputation in the America, Eastern Europe, Oceania, Southeast Asia
etc. markets. And we hope to provide our service to more customers
around the world.
Here in Dycon, we consider customer's interests, customer's demand
as the center, cooperating with Dycon, you will obtain a good
regional protection ,qualified product, good service, also you will
have a continuous development of product platform.
Dycon is your trust partner, join our dealer team, you will obtain
more.