WJ60 series 8 channels DI/DO Digital Signal Converter, Dry contact to RS485 converters,blue DIN35

Clients can order from our website directly by Paypal.

Digital signal input types:
1.Dry contact input
2.Wet contact input
3.Open collector input
4.TTL / CMOS level, 24V level input
Product Selection:
Type No.: WJ60-485 (input:8-ch digital signal,output:485 interface)
Type No.: WJ60-232 (input:8-ch digital signal,output:232 interface)

Features:
>> Eight channels digital signal input and output
>> Input/output/power supply:non-isolation
>> Over voltage protection,reverse polarity protection
>> Can read level status of each channel via the RS-485/232 interface
>> Wide power supply range: 8 ~ 32VDC
>> High reliability, easy programming, easy application
>> DIN35 Rail-mounted
>> Can programme setting module address,baud rate
>> Support Modbus RTU communication protocol
>> Dimensions: 120 mm x 70 mm x 43mm
Product Overview:
WAYJUN WJ60 series products realize the signal acquisition between sensor and host, to measure the switching signal. WJ60 series can be used in RS-232/485 bus industrial automation control system, switching signal measurement,monitoring and control, high and low level signal measurement, industrial field signal isolation and long-term industrial transmission and so on.
WJ61 General parameters:
(typical @ +25 ℃, Vs is 24VDC)
Input type: switch input(DI0~DI7)
Low level: input <1V
High level: input 3.5~30V
Input Resistance:>10KΩ
Output type: open collector output, voltage 0~30V,maximum load current:30mA,8 channels(DO0~DO7)
Communication: RS-485 protocol or RS-232 standard characters protocols and MODBUS RTU communication protocol
Baud Rate (2400,4800,9600,19200,38400 bps) can be selected via software
Address (0 to 255) can be selected via software
Communication Response Time: 100 ms maximum
Power Supply: +8 ~ 32VDC wide range power supply, internal anti-reverse and over- voltage protection circuit
Power Loss: less than 0.5W
Operating Temperature: - 45 ~ +85℃
Humidity: 10 ~ 90% (no condensation)
Storage Temperature: - 45 ~ +85℃
Storage Humidity: 10 ~ 95% (no condensation)
Isolation Voltage: non-isolation
Dimensions: 120 mm x 70 mm x 43mm

Keywords:Dry contact to RS485|remote I / O module| switch dry contact input acquisition|switch signal to RS485|bus data acquisition module|Digital DI/DO module|dry contact, wet contact, open collector, TTL / CMOS level input

Footprint Function:

Download datasheet: http://www.wayjun.net/Datasheet/Signal/WJ60%20series%20DIDO%20Converters.pdf

Shenzhen WAYJUN Industrial Automation is a HI-tech company of designing, researching 4-20mA/0-5V to RS485 Data Acquisition Module,analog signal isolated converter / conditioners,Ethernet I/O Module,PT100 temperature /speed/frequency signal isolators/splitter,isolated amplifier,Digital Signal to RS485/232 Module,Min-power DC DC converters.Our products also carry the CE approval for safety.

WAYJUN's products are widely used in the industry power fields of control, electric power, electronic instrument, medical electronic, rail transit, communication, telecom, automation,Medical and Test & Measurement etc.Our products are sold all over the world.Create maximum value for customers is our constant aim.More details,please check: www dot wayjun dot net.

WAYJUN products series:
1. Remote I/O isolation module
WJ21 series -------- 4-20mA/0-10V to RS485/232 AD converter
WJ31 series -------- RS485/232 to 4-20mA/0-10V DA converter
WJ28 series -------- 8 channels 4-20mA/0-10V to RS485/232 AD converter
WJ70 series -------- 4-ch DI 4-ch relay output, RS485/232 remote data acquisition module
WJ61 series --------16-ch DI switch / dry contact signal to RS485/232
WJ62 series -------- 8-ch DI switch signal to RS485/232 remote I/O modules
WJ60 series -------- 8-ch DI 8-ch DO switch to RS485/232 remote I/O modules

2. Analog signal isolator / transmitter:
DIN35 rail-mounted
DIN11 IAP-V (A) -P-V (A) ---- photoelectric isolation signal transmitter (one in one out)
DIN12 IAP-V (A) -P-V (A) ----- voltage / current signal splitter (one in two out)
DIN14 IAP-V (A) -P-V (A) ----- voltage / current signal splitter (one in four out)
DIN22 IAP-V (A) -P-V (A) ----- voltage/current signal isolated transmitter(two in two out)
DIN44 IAP-V (A) -P-V (A) ------ voltage/current signal isolated transmitter(four in four out)
WJ11 IAP-Z-T-P-A (V) ----------- PT100 thermal resistance temperature signal isolation transmitter
DIN22 IAP-Z-T-P-A (V) ----------- PT100 thermal resistance temperature signal isolation transmitter (two out of two)
DIN12 IAP-Z-T-P-A (V) ----------- PT100 thermal resistance temperature signal isolation splitter (one in two out)
DIN11 IAP-F-P-V (A)-----------frequency to voltage / current signal isolated transmitter
DIN11 IAP-V (A) -P-F----------voltage / current signal frequency isolation transmitter
DIN11 IAP-R-P-V (A) --------- Potentiometer /resistance signal isolated transmitter
DIN11 IAP-S-P-O-----------speed sensor signal isolated transmitter, sine waveshaping
DIN33 IAP-S-P-O------------------- encoder differential signal to pulse signal transmitter
DIN11D IAP-V (A) -P-V (A) -------- large current output signal isolator
DIN11 IAP 4-20mA------------------4-20mA passive signal isolator
DIN22 IAP 4-20mA------------------4-20mA passive signal isolator (two in two out)
DIN11 IAP 100LF-------------------- passive isolation 4-20mA signal distributor
DIN11 IAP 100LP-------------------- passive isolation 4-20mA signal conditioner
In addition, DC voltage / current signal isolators also have PCB package.