WAYJUN 3000VDC isolation RTD PT100 temperature Signal Isolators(one in one out) Green DIN35 signal converter

One In/One Out PT100 to 4-20mA/0-5V analog signal isolated converters/transducer/temperature converter/thermal resistance converter

Features:
>> Input: Pt100/PT1000/PT10/Cu50/Cu100
>> Output signal: 4-20mA/0-20mA/0-5V/0-10V/1-5V
>> Accuracy: 0.2 (FSR%)
>> Containing linear and long-term compensation
>> Power supply:5V(+/-10%)/12V/15V/24VDC (8-32VDC)
>> Isolation voltage: 2500VDC (1mA, 60S)
>> Installation: DIN35 rail
>> Industrial temperature range: - 45 ~ + 85 deg.C
>> Size:79x69.5x25mm

General parameters:
>> Accuracy ------- 0.2% (relative to temperature)
>> Input ------- three-wire, four-wire or two-wire RTD signal, you can choose Pt100, Pt1000, Pt10, Cu50, Cu100 thermal
resistance.(Need to select a temperature range and a output signal)
>> Output ------- standard voltage or current signal. Can also be user-defined
>> Response time ------- ≤ 100mS
>> Auxiliary power ------- DC5V, 9V, 12V, 15V, 24V
>> Power ------- <1W
>> Temperature drift ------- 50ppm / ℃ (typical)
>> Load capacity ------- voltage output: ≥ 2 kΩ
>> Current output: ≤ 450Ω
>> Isolation ------- input / output / auxiliary power isolation
>> Isolation voltage ------- 2500VDC, 1 minute, leakage current (1mA)
>> Impact resistance voltage ------- 3KV, 1.2/50us (peak value)
>> Operating Temperature -------- -40 to +85 ° C
>> Storage Temperature -------- -45 ~ +80 ℃
>> Operating Humidity ------- 10 ~ 90% (no condensation)
>> Storage Humidity ------- 10 ~ 95% (no condensation)

Product Listing:
WJ11 -Z- T- P- O

Samples:
signal Input: Pt100,temperature range:0~100℃; signal output:4-20mA; power:24V
Part No.: WJ11-Z1-T2-P1-A4

signal Input: Pt1000,temperature range:0~200℃; signal output:0-10V; power:12V
Part No.: WJ11-Z5-T4-P2-V2

Products Connecting Diagram:

more details,please check: http://www.wayjun.net/Datasheet/Signal/Temperature%20Signal%20Converters.pdf

Shenzhen WAYJUN Industrial Automation is a HI-tech company of designing, researching 4-20mA/0-5V to RS485 Data Acquisition Module,analog signal isolated converter / conditioners,Ethernet I/O Module,PT100 temperature /speed/frequency signal isolators/splitter,isolated amplifier,Digital Signal to RS485/232 Module,Min-power DC DC converters.Our products also carry the CE approval for safety.

WAYJUN's products are widely used in the industry power fields of control, electric power, electronic instrument, medical electronic, rail transit, communication, telecom, automation,Medical and Test & Measurement etc.Our products are sold all over the world.Create maximum value for customers is our constant aim.More details,please check: www dot wayjun dot net.

WAYJUN products series:
1. Remote I/O isolation module
WJ21 series -------- 4-20mA/0-10V to RS485/232 AD converter
WJ31 series -------- RS485/232 to 4-20mA/0-10V DA converter
WJ28 series -------- 8 channels 4-20mA/0-10V to RS485/232 AD converter
WJ70 series -------- 4-ch DI 4-ch relay output, RS485/232 remote data acquisition module
WJ61 series --------16-ch DI switch / dry contact signal to RS485/232
WJ62 series -------- 8-ch DI switch signal to RS485/232 remote I/O modules
WJ60 series -------- 8-ch DI 8-ch DO switch to RS485/232 remote I/O modules

2. Analog signal isolator / transmitter:
DIN35 rail-mounted
DIN11 IAP-V (A) -P-V (A) ---- photoelectric isolation signal transmitter (one in one out)
DIN12 IAP-V (A) -P-V (A) ----- voltage / current signal splitter (one in two out)
DIN14 IAP-V (A) -P-V (A) ----- voltage / current signal splitter (one in four out)
DIN22 IAP-V (A) -P-V (A) ----- voltage/current signal isolated transmitter(two in two out)
DIN44 IAP-V (A) -P-V (A) ------ voltage/current signal isolated transmitter(four in four out)
WJ11 IAP-Z-T-P-A (V) ----------- PT100 thermal resistance temperature signal isolation transmitter
DIN22 IAP-Z-T-P-A (V) ----------- PT100 thermal resistance temperature signal isolation transmitter (two out of two)
DIN12 IAP-Z-T-P-A (V) ----------- PT100 thermal resistance temperature signal isolation splitter (one in two out)
DIN11 IAP-F-P-V (A)-----------frequency to voltage / current signal isolated transmitter
DIN11 IAP-V (A) -P-F----------voltage / current signal frequency isolation transmitter
DIN11 IAP-R-P-V (A) --------- Potentiometer /resistance signal isolated transmitter
DIN11 IAP-S-P-O-----------speed sensor signal isolated transmitter, sine waveshaping
DIN33 IAP-S-P-O------------------- encoder differential signal to pulse signal transmitter
DIN11D IAP-V (A) -P-V (A) -------- large current output signal isolator
DIN11 IAP 4-20mA------------------4-20mA passive signal isolator
DIN22 IAP 4-20mA------------------4-20mA passive signal isolator (two in two out)
DIN11 IAP 100LF-------------------- passive isolation 4-20mA signal distributor
DIN11 IAP 100LP-------------------- passive isolation 4-20mA signal conditioner
In addition, DC voltage / current signal isolators also have PCB package.