

Add to Cart
Mini portable GPS Jammer Hand-held portable black Can choose WiFi bluetooth jammer portatile12 bochuangshikong BCSK-101M
Portable 2 bands GPS Jammer is very convenience and comouflage, support both Power Bank and Car Charger.
Product Name | GPS Signal Jammer vehicle speed limit jammer |
Brand | Bochuang spacetime |
model | BCSK-101M(double) |
1200-1300mhz | 1bands |
1550-1620mhz | 1bands |
* Total working bands: 2 bands
* Total output power: 100Mw
* Jamming Range: 3-15meters
* Support DC 12V, car charger, power bank
* Color: Black
Jamming area: up to 10 meters
Cellular systems: output frequency
GPS: 1,550 to 1,600MHz
Power supply
Built-in battery: 4V/1,600mAh
Dimension:
Product: 5 x 4.5 x 1.8cm
Packing (L x W x H): 20 x 19 x 7cm
Net weight:
Product weight: 0.3kg
Packing weight: 0.6kg
Accessories:
Charger
Car charger
1 antenna
Working time: 1 to 2 hours
Primary Competitive Advantages:
Country of Origin
Experienced Staff
International Approvals
Price
Product Features
Product Performance
Quality Approvals
Reputation
Service
Small Orders Accepted
Basic knowledge of shield
Installation and operating instructions
1. Take out the host of Bochuang spatiotemporal brand jammer from the packaging box;
2 screw the antennas into their corresponding antenna bases
respectively, otherwise they are invalid;
3. Hang the shield on the wall or at the corresponding position,
and the best installation height is 1-2m;
4 turn on the power switch, and the work indicator on the power is
on, indicating that it starts to work. If it is the style of
built-in lithium battery, please ensure that it is fully charged
before use.
matters needing attention
1 the antenna must be installed according to the corresponding
identification on the host, and then turn on the host.
2. The effective coverage of the shield is a circular area centered
on the shield, so pay attention to correctly select the placement
position of the shield to avoid shielding dead angle; If it is a
directional antenna, the alignment direction can be adjusted
according to the standard sector angle of the antenna.
3 the shield shall be placed in a well ventilated place, avoiding
the shielding of large objects and the strong electric and magnetic
source of strong heat source as far as possible, so as to ensure
the shielding effect and stable operation for a long time.
4 when the shield works, it is not allowed to stack other articles
and disassemble the antenna on it, so as not to affect the
shielding effect and damage the machine.
5 when Bochuang space-time brand shield is not in use, the power
supply should be cut off in time to avoid affecting the normal use
of mobile phones.
6 when using the shield outdoors, pay attention to dust prevention
and waterproof. Please keep away from corrosive gases and liquids,
and do a good job in dust and moisture prevention, so as not to
accelerate the aging of internal components of the equipment
7 when the site area used is larger than the effective shielding
range, it is recommended to use multiple shields for honeycomb
installation to ensure the shielding effect.
8. Since the power supply and antenna are specially matched with
the host and are debugged one by one during factory debugging,
please try not to use them interchangeably to ensure the best
effect..
9. The shield is guaranteed for one year and maintained for life.
Problem solving
1 Why do some mobile phone signal indications still have signal
indications when Bochuang spatiotemporal brand Signal Jammer works?
A: This is just an illusion. In fact, at this time, the mobile
phone has been unable to communicate. When you press the pull-out
button at will, you will find that there is no signal indication on
the signal indicator.
2 will the signal shield interfere with the normal operation of
other electronic equipment?
A: No. This is because the electromagnetic signal sent by the
signal shield completely falls within the working frequency band of
the mobile phone specified by the state, which will only block the
mobile phone communication. And this signal is always in a
relatively static state and will not affect any electronic
equipment.
3 is Bochuang space-time brand Signal Jammer harmful to human body and mobile phone?
A: please rest assured that the electromagnetic signal intensity
emitted by the signal shield is very weak. The test data show that
this signal intensity will not cause harm to the human body. At the
same time, the signal shield only blocks the forward signal of the
mobile phone, so that the mobile phone can not contact the base
station, so it will not cause any damage to the mobile phone
itself.
4 is there any difference in the action distance of Bochuang
spatiotemporal brand Signal Jammer when used indoors and outdoors?
A: Yes. The effective distance (10-40m) of signal shield generally
refers to the indoor distance. In outdoor open areas, the effective
distance of shielding can reach hundreds of meters. It should be
noted that whether used indoors or outdoors, the effective working
distance of the shield is related to the environmental conditions
at that time, such as the distance from the base station, the
location, etc. Therefore, when using the signal shield, this factor
should be fully considered to avoid shielding dead angle, which
will affect the shielding effect.
5 is the effect of Bochuang spatiotemporal brand Signal Jammer on
GSM mobile phones and CDMA mobile phones the same?
A: that's a good question. Because the anti-interference
performance of CDMA mobile phones is much better than that of GSM
mobile phones, the effective shielding distance of signal shield for CDMA mobile phones is less than that of GSM mobile phones, but
the difference is not very large, about 2-4m. However, users are
also reminded that in some particularly important places, if
necessary, the number of signal shields in the field should be
increased to ensure the shielding effect of CDMA mobile phones.
6. After the Signal Jammer of Bochuang spatiotemporal brand works
for a period of time, the casing is hot. Will it damage the machine
if it works for a long time?
A: Thank you for your care. This is a normal phenomenon. In design,
we use the thermal conductivity of aluminum alloy wire drawing
casing to assist heat dissipation. So as to ensure long-term stable
operation. Therefore, the hot casing will not damage the machine.