Signal WiFi jammer 2g 3g 4G 5g GPS mobile phone shielding device 700 850 900 1700 1800 2300 MHz mobile Signal Jammer

Product Paramenters

1, Functional features:
*Effectively shield CDMA (China Telecom), GSM (China Mobile, China Unicom), DCS (1800MHz), PHS (1900MHz), 3G, 4G, 5g, WiFi (WLAN), Bluetooth and other mobile phone signals jammer
*Green environmental protection, electromagnetic field intensity is far lower than the standard, and has no impact on human body
★ it has a unique heat dissipation and ventilation structure, adopts the combination of dual fan active heat dissipation and super large heat sink passive heat dissipation, and is equipped with overheating protection system to ensure continuous and stable operation for a long time
★ modular shell design is adopted, and the channel can be expanded infinitely
★ built in industrial high-power switching power supply to ensure sufficient power
*Omnidirectional external high gain antenna is adopted, which has better shielding effect
*The slow start circuit is designed to effectively avoid ignition when starting up
*Imported high-performance integrated circuits and chip components are selected, and imported full-automatic chip mounter and reflow welding machine are used for processing and assembly line production, with stable quality and performance
2, Technical indicators:
★ the technical indexes have passed the quality and safety inspection of the quality and safety certification authority, and meet the requirements of "electromagnetic environment control limit" after being monitored by the electromagnetic environment monitoring authority

Problem solving
1 Why do some mobile phone signal indications still have signal indications when Bochuang spatiotemporal signal shield works?
A: This is just an illusion. In fact, at this time, the mobile phone has been unable to communicate. When you press the pull-out button at will, you will find that there is no signal indication on the signal indicator.
2 will the signal shield interfere with the normal operation of other electronic equipment?
A: No. This is because the electromagnetic signal sent by the signal shield completely falls within the working frequency band of the mobile phone specified by the state, which will only block the mobile phone communication. And this signal is always in a relatively static state and will not affect any electronic equipment.
3 is Bochuang spatiotemporal signal shield harmful to human body and mobile phone?
A: please rest assured that the electromagnetic signal intensity emitted by the signal shield is very weak. The test data show that this signal intensity will not cause harm to the human body. At the same time, the signal shield only blocks the forward signal of the mobile phone, so that the mobile phone can not contact the base station, so it will not cause any damage to the mobile phone itself.
4 is there any difference in the action distance between indoor and outdoor signal shields?
A: Yes. The effective distance (10-40m) of signal shield generally refers to the indoor distance. In outdoor open areas, the effective distance of shielding can reach hundreds of meters. It should be noted that whether used indoors or outdoors, the effective working distance of the shield is related to the environmental conditions at that time, such as the distance from the base station, the location, etc. Therefore, when using the signal shield, this factor should be fully considered to avoid shielding dead angle, which will affect the shielding effect.
5 does Bochuang spatiotemporal signal shield have the same effect on GSM mobile phones and CDMA mobile phones?
A: that's a good question. Because the anti-interference performance of CDMA mobile phones is much better than that of GSM mobile phones, the effective shielding distance of signal shield for CDMA mobile phones is less than that of GSM mobile phones, but the difference is not very large, about 2-4m. However, users are also reminded that in some particularly important places, if necessary, the number of signal shields in the field should be increased to ensure the shielding effect of CDMA mobile phones.
6. After the signal shield of Bochuang spatiotemporal brand works for a period of time, the casing is hot. Will it damage the machine after working for a long time?
A: Thank you for your care. This is a normal phenomenon. In design, we use the thermal conductivity of aluminum alloy wire drawing casing to assist heat dissipation. So as to ensure long-term stable operation. Therefore, the hot casing will not damage the machine.