

Add to Cart
100W high power Desktop 2g.3g.4g 5g GPS WiFi 2.4G 5.8G frequency mobile phone jammer WiFi Wireless Network Signal Jammer
BCSK-D-G-10 high-power wireless signal jammer, a high-power 10 channel mobile phone signal shielding device with a maximum transmission power of 100W and a shielding radius of 5-60m, can effectively shield various 2g34g WiFi signals, especially enhance the power push of 3g4g. The main body shell adopts professional heat dissipation structure, with simple and beautiful style, generous and fashionable. It is widely used in important secret places such as various conference rooms in the judicial industry, education industry, party and government organs, military and so on.
Product Name | Wireless Signal Jammer |
brand | Bo Chuang space time |
model | BCSK-D-G-10 |
power | 100W |
Frequency can be customized | CDMA/GSM/DCS/PHS/3G/4G/TD/5G/WIFI/GPS/BD/LOJACK/315M/433M/868M/UHF/VHF |
Product features
-RF power of each channel is 10w-12w, 10 channel output (2G, 3G,
4G); (5g) RF power of each channel is 5W
-Effectively shield all 2G, 3G, 4G and 5g WiFi signals from China
Mobile, China Unicom and China Telecom;
-In particular, the power improvement of 2g.3g and 4G is
strengthened, and the output power of each channel is guaranteed to
be no less than 10W;
-The host adopts DC 24V power supply and is equipped with precision
voltage regulating circuit. Even if the voltage fluctuates greatly,
it will not affect the normal operation of the host;
-The main body of the shield adopts a professionally designed heat dissipation structure. The
style is simple, beautiful and generous, without losing the fashion
design.
-High temperature resistant environment, which can quickly transfer
heat to the whole heat exchange surface (i.e. heat sink) to avoid
local heat accumulation;
-The air inlets and outlets on both sides are symmetrically
arranged to form convection, and the two silent fans immediately
discharge the heat of power amplifier to ensure the stable
operation of the main engine;
-It can be opened continuously for many years, with stable
performance and long service life.
Channel: operating frequency MHz / average output power:
-2G:870-880MHz/10W
-2G:925-960MHz/10W
-2G:1805-1920MHz/10W
-3G:2010-2025MHz/10W
-3G:2110-2175MHz/10W
-4G:2300-2390MHz/10W
-WIFI:2400-2485MHz/10W
-4G:2550-2675MHz/10W
-5G:3400-3600MHz/5W
-5G:4800-4900MHz/5W
Other parameters:
Total power: 100W
Ambient temperature: - 40 ℃ - + 55 ℃
Relative humidity: 35-85%
Battery: 4000mAh
Interference radius: up to 30m (interference radius depends on
local signal strength)
Weight: 4.5kg
Size: 321 * 185 * 80mm
Power consumption: ≤ 240W
Power output: DC 24V / 12a
Installation height: 1.8m-2.5m
Installation environment: Indoor
Advantages and features:
Super thick chassis and dense heat sink structure design;
Built in double fan convection cooling;
High quality metal shell switching power supply is adopted.
Packing list:
1 * portable Signal Jammer
1 * AC charger
10 * antenna
usage method
1. Open the package and check whether all parts of Bochuang
spatiotemporal brand mobile phone jammer are intact;
2. Connect the power adapter and power cord to the interface on the
right side of the fuselage;
3. Install the antenna to the interface according to the serial
number;
4. Insert the plug into 220V mains socket;
5. Place the shield to a plane more than 180cm above the ground (or
hang it on the vertical wall);
6. Press the switch on the right side of the machine body to start
the automatic operation of the shield.
A number of high-speed and low-noise cooling fans are installed
inside the Bochuang spacetime mobile phone jammer,
The body is made of all metal, durable and excellent heat
dissipation,
The working temperature is far lower than that of other similar
products, which can work stably and continuously for a long time in
various high and low temperature environments,
The service life of the product is more than three times higher
than the average level in the industry.
5, Installation instructions this product can be directly fixed on
the wall or ceiling with screws. Installation height: 1.5-2m,
Check the power switch of the host, confirm that the power switch
is in the off position, insert the power adapter input connector
into the adapter jack on the left side of the host, and connect the
power adapter input plug with AC220V power supply.
6, Precautions
1. The transmitting antenna of the shield adopts the
omnidirectional antenna with built-in soft whip. The effective
coverage is the area gradually weakened with the machine as the
center. Therefore, pay attention to correctly select the placement
position and angle of the machine during use to avoid shielding
dead angle
2 the shield shall be placed in a well ventilated place, avoiding
strong heat source and strong electromagnetic source, so as to
ensure the shielding effect and stable operation for a long time
3 when the shield works, do not stack other items on it, so as not
to affect the shielding effect and damage the machine
4 when the shield is not in use, the power supply should be cut off
in time to avoid affecting the normal use of the mobile phone