Add to Cart
Description
A gabion wall is a retaining wall made of stacked stone-filled gabions tied together with wire. Gabion walls are usually battered (angled back towards the slope), or stepped back with the slope, rather than stacked vertically
Welded gabion is made of high quality low carbon steel wire, in strict accordance with BS1052:1986 standard through automation, precision and accurate processing machinery and equipment welding row after forming, then it use electro-galvanized, hot dip galvanized, coated, dip or Galfan and other processes where the surface passivation, plastics processing.
Specification
Gabion is composed of welded mesh panel and spring steel lacing wire.
Nominal Box sizes (m) | Mesh size (mm) | No. of diaphragms (no.) | Capacity per box (m3) |
1.0x1.0x0.5 | 50x50 75x75 50x100 100x100 | 0 | 0.50 |
1.0x1.0x1.0 | 0 | 1.00 | |
1.5x1.0x0.5 | 0 | 0.75 | |
1.5x1.0x1.0 | 0 | 1.50 | |
2.0x1.0x0.5 | 1 | 1.00 | |
2.0x1.0x1.0 | 1 | 2.00 | |
3.0x1.0x0.5 | 2 | 1.50 | |
3.0x1.0x1.0 | 2 | 3.00 | |
4.0x1.0x0.5 | 3 | 2.00 | |
4.0x1.0x1.0 | 3 | 4.00 |
Easy Installation
Installation Instructions Below:
Step 1. Ends, diaphragms, front and back panels are placed upright on the bottom section of wire mesh.
Step 2. Secure panels by screwing spiral binders through the mesh openings in adjacent panels.
Step 3. Stiffeners shall be placed across the corners, at 300mm from the corner. Providing a diagonal bracing, and crimped over the line and cross wires on the front and side faces.None are needed in interior cells.
Application