Industrial Abrasive Belt Surface Grinder Machine , Universal Wire Grinding Machine
Brand Name:Belt grinding machine
Certification:ISO9001
Minimum Order Quantity:1set
Delivery Time:45 days after receiving order and deposit
Payment Terms:T/T 30% deposit，70% rest payment before shipment
Place of Origin:JIANGSU CHINA
Contact Now
Add to Cart
Active Member
Address:
No.151 Shengang Road,Lingang street,Jiangyin city,Jiangsu,China
Supplier`s last login times:
within 23 hours
Product Details
Company Profile
Product Details
Calcium Silicate Board Abrasive Belt Grinding Machine , Composite Material Grinding Machine
How to use
A. Place the pipe grinding machine horizontally on a hard flat surface.
B. Install and remove the belt: The belt is controlled by an elastic spring. And move from top to bottom.
Use the round tube ( send with the grinding machine) to harness the spring control device, press down, then the abrasive belt will release;
Adjust the abrasive belt location, release the spring controller naturally, and locked with a screw handle, so install and fixed the sand belt
A. Place the pipe grinding machine horizontally on a hard flat surface.
B. Install and remove the belt: The belt is controlled by an elastic spring. And move from top to bottom.
Use the round tube ( send with the grinding machine) to harness the spring control device, press down, then the abrasive belt will release;
Adjust the abrasive belt location, release the spring controller naturally, and locked with a screw handle, so install and fixed the sand belt
C. Turn the screw handle which on the rubber wheel housing, to
adjust the feeding rubber wheel in and out position.
Until the tube rotating freely, that the feeding rubber wheel, round tube and abrasive belt can reach a best friction distance.
The feeding rubber wheel rotates counterclockwise (from bottom to top).
D. Adjust the feeding pallet up and down by screw handle, to make the circle pipe, feeding rubber wheel and sanding belt on a best center position.
E. This pipe grinding machine is very easy to control, only two buttons "ON and OFF"
Until the tube rotating freely, that the feeding rubber wheel, round tube and abrasive belt can reach a best friction distance.
The feeding rubber wheel rotates counterclockwise (from bottom to top).
D. Adjust the feeding pallet up and down by screw handle, to make the circle pipe, feeding rubber wheel and sanding belt on a best center position.
E. This pipe grinding machine is very easy to control, only two buttons "ON and OFF"
F. During feeding, the sand belt down movement, and feeding rubber
wheel up movement.
When the feeding rubber wheel angle move to left, and the angle
larger, the feeding speed faster.
Technical Parameters
| Voltage | 380V, 50Hz |
| Main motor power | 2.2KW |
| Fans power | 0.44KW |
| Driving wheel speed | 1420r/min |
| Abrasive belt speed | 890mm/min |
| Feeding wheel speed | 70r/min |
| Feeding speed | 5-15m/min, can adjusted by feeding angle |
| Tube diamenter | 10-60mm, skilled workers can process 6-60mm |
| Abrasive belt size | 1820*120mm (L*W) |
| Machine size | 500*700*1250mm (L*W*H) |
| Machine weight | 360KG |
Main technical data of abrasive belt grinding machine
- Fully automatic.
- Utilizes the principle of seam welder with round welding wheel.
- Save labor cost: only one worker required put the sink into the platform and then take it away when finishing the grinding process
- Medium frequency inverter power source which is electricity saving.
- Enhanced function: memorize 16 sets of welding way . If you need more , we could design for you.
- Adopt the professional automatic control system from Mitsubishi
- Use the servo motor to drive axis X (locate mould) and axis Y (welding electrode) to operate under the preset procedure of PLC data.
SPGB belt polishing machine is environmentally friendly
non-emissions alternative to pickling, wire (raw material) surface
oxide layer 100% removal, for and tie wire, galvanized wire, chrome
wire, copper wire, alloy wire, stainless steel wire , Screw line,
fasteners, welding wire, welding rod, wire rope and so on.
When the machine works, the turntable rotates 360 ° around the
steel wire to ensure that there is no contact between the steel
wire and the abrasive belt. The belt is driven by two rotating
rollers and pressed against the wire surface, so that the wire
surface is slightly cut. Evenly removed 0.03mm
Industrial Abrasive Belt Surface Grinder Machine , Universal Wire Grinding Machine
Inquiry Cart
0