Product Details
Wood pellet hot water boilers, as reliable, cost saving and
enviroment friendly heating system, are widely used in domestic
heating, hotel heating, hospitable and school heating and other hot
water needed field. Daton wood pellet boilers are equipped with
high intelligent automatic control system for temperature control,
wood pellets feeding speed control and ignition.
Wood Pellets
Wood Pellets are made from natural wood. They are dry and usually
have less than 10% moisture. A fine wood substance is compressed
through a cylinder which can then disintegrate. The cylinders are
small at 10cm diameter and the concentrated compression makes them
very dense; this factor leads them to have one of the best energy
efficiency ratings when compared to other fuels.
Advantage Feature
- Induced Draught System: Adopt low noise, high temperature resistant, long axis fan.
Imported axis make sure the long lifespan and stable operation.
- Automatic Ignition System: Switzerland imported double ignition device, high efficient, fast
ignition and long lifespan. In order to make sure the fast and
reliable ignition system, Daton equipped two sets ignition device
for each boiler( one work, one backup)
- Anti burnback feeding system: pellets feeding system adopt double stage screw feed. The first
stage is for controlling the pellet feeding quantity to make sure
enough pellet fuel. The second stage makes sure there is no excess
pellet in the feed screw. So it is blank between the first stage
and the second stage. There is no back-fire happen and make sure
the safety operation. Through reducing the load of feeding system,
the wood pellet boilers feeding device will have fewer fault.
- Intelligent Control: we adopt microcomputer one-button operation, automatic feed
automatic ignition, with the setting temperature, start and stop
cycle, and fault alarm function, simple and easy operation.
- Advanced combustion system: adopt Patent inside wood pellet burner, adopt special three side
air supply system, which makes sure the pellet full combustion.
Equipped heat recovery device makes the boiler efficiency can reach
92%.
- Safety operation: anti-back fire feeding system, temperature sensor, low water level
protection device, over-temperature protection device.
- Easy to maintain: wood pellet hot water boilers belong to atmosphere hot water
boilers. There is no need for professional stoker. It is automatic
wood pellets feeding and automatic ignition. User just needs to add
1-2 times fuel per day. Ash cleaning is very easy, User just needs
to take out of the ash bucket at the bottom of the chamber.
- Cost saving: wood pellet hot water boilers operation cost is just 1/3 of diesel
oil hot water boilers and 1/5 electric heating hot water boilers.
Parameter Table of Wood Pellet Hot Water Boilers
Model | RVFW0.018 | RVFW0.035 | RVFW0.06 | RVFW0.08 | RVFW0.12 | RVFW0.18 |
85/64-M | 85/65-M | 85/65-M | 85/65-M | 85/65-M | 85/65-M |
Rated Capacity(Btu) | 60,000 | 119,000 | 200,000 | 270,000 | 400,000 | 600,000 |
Rated Capacity (Mw/h) | 0.018 | 0.035 | 0.06 | 0.08 | 0.12 | 0.18 |
Rated Calorific Capacity (Kcal/h) | 1.5×104 | 3×104 | 5×104 | 7×104 | 10×104 | 15×104 |
Theoretic Heating Area(S.M.) | 80-150 | 150-280 | 300-400 | 400-600 | 600-800 | 800-1200 |
Thermal Efficiency | 95% |
Rated Outlet Temp. | 85 celsius degree( 185 F) |
Operating pressure | Atmospheric |
Power Voltage (v) | 220 | 220 | 220 | 220 | 220 | 380 |
Power(w) | IDF | 180 | 180 | 250 | 550 | 750 | 1500 |
Blower | 120 | 120 | 180 | 250 | 370 | 250 |
Feeding | 90 |
Igniter | 2000 | 2000 | 2000 | 4000 | 4000 | 4000 |
Feeding reducer ratio(i) | 250 | 150 |
Exhaust Flue Dia. (mm) | 80 | 80 | 114 | 114 | 114 | 139 |
Water Inlet Caliber | 1.5〞 | 1.5〞 | 1.5〞 | 2.0〞 | 2.0〞 | 2.5〞 |
Water Outlet Caliber | 1.5〞 | 1.5〞 | 1.5〞 | 2.0〞 | 2.0〞 | 2.5〞 |
Drain out Caliber | 1.5〞 | 1.5〞 | 1.5〞 | 2.0〞 | 2.0〞 | 2.5〞 |
Water Storage (kg) | 240 | 280 | 350 | 380 | 450 | 560 |
Hoper Capacity (kg) | 50 | 50 | 150 | 150 | 150 | 200 |
Fuel Consumption (kg/h) | 3.8 | 7 | 12 | 17 | 24 | 36 |
Hot Water Output (t/h) | 0.57 | 0.64 | 1.1 | 1.5 | 2.2 | 3.2 |
(In condtion of feeding water Temp.15 celsius degee and hot water Temp. 55 celsius
degree) |
Boiler Proper Size (mm) | L | 600 | 800 | 1280 | 1330 | 1450 | 1750 |
W | 460 | 460 | 550 | 550 | 600 | 670 |
H | 1200 | 1200 | 1100 | 1300 | 1380 | 1420 |
Transportation Weight (kg) | 210 | 252 | 393 | 509 | 590 | 642 |
Model | RVFW0.24 | RVFW0.35 | RVFW0.48 | RVFW0.7 | RVFW1.05 | RVFW1.4 |
85/65-M | 85/65-M | 85/65-M | 85/65-M | 85/65-M | 85/65-M |
Rated Capacity(Btu) | 800,000 | 1,190,000 | 1,600,000 | 2,380,000 | 3,570,000 | 4,760,000 |
Rated Capacity (Mw/h) | 0.24 | 0.35 | 0.48 | 0.7 | 1.05 | 1.4 |
Rated Calorific Capacity (Kcal/h) | 20×104 | 30×104 | 40×104 | 60×104 | 90×104 | 120×104 |
Theoretic Heating Area(S.M.) | 1200-1600 | 1600-2400 | 2400-3200 | 3200-4800 | 4800-7000 | 7000-8600 |
Thermal Efficiency | 95% |
Rated Outlet Temp. | 85 celsius degree( 185 F) |
Operating pressure | Atmospheric |
Power Voltage (v) | 380 | 380 | 380 | 380 | 380 | 380 |
Power(w) | IDF | 1500 | 2200 | 2200 | 3000 | 5000 | 7500 |
Blower | 250 | 370 | 370 | 750 | 750 | 1500 |
Feeding | 90 |
Igniter | 4000 | 4000 | 4000 | 4000 | 4000 | 4000 |
Exhaust Flue Dia. (mm) | 159 | 159 | 159 | 219 | 273 | 300 |
Water Inlet Caliber | 2.5〞 | 3.0〞 | 3.0〞 | 4〞 | 4〞 | 4〞 |
Water Outlet Caliber | 2.5〞 | 3.0〞 | 3.0〞 | 4〞 | 4〞 | 4〞 |
Drain out Caliber | 2.5〞 | 2.5〞 | 2.5〞 | 2.5〞 | 2.5〞 | 2.5〞 |
Water Storage (kg) | 800 | 980 | 1100 | 1300 | 1950 | 2350 |
Hoper Capacity (kg) | 200 | 200 | 200 | 280 | 280 | 280 |
Fuel Consumption (kg/h) | 48 | 70 | 96 | 140 | 210 | 280 |
Hot Water Output (t/h) | 4.3 | 6.4 | 8.5 | 12.8 | 19.1 | 25.5 |
(In condtion of feeding water Temp.15 celsius degee and hot water Temp. 55 celsius
degree) |
Boiler Proper Size (mm) | L | 1860 | 2320 | 2320 | 2850 | Φ1370 | Ø1620 |
W | 720 | 980 | 980 | 1150 | Φ1370 | Ø1620 |
H | 1580 | 1760 | 1960 | 2210 | 2800 | 3500 |
Transportation Weight (kg) | 1022 | 1428 | 1768 | 2229 | 3126 | 4138 |
Company Profile
Romiter Machinery Co., Ltd. is a market leading designer and a
manufacturer of Food Processing Machine, Woodworking Machine, Wire
Forming Machine and Packing Machine with 10 years’ experience. Our
factory is company, located at Middle China. with convenient come
and go and advantageous geographical location. Covering an area of
36,000 square meters,the company, With total investment of RMB 180
million on the project. In the past 10 years, we focused on
researching and designing the machinery which could process the
onion into different types
We provides machine to help customer earn money. Now, we have help
customer bulild ice cream sticks production line, chili processing
machine, net bag packing machine, garlic processing line, onion
processing line, , vegetable processing machine, full automatic
packing plant, laundry wire hanger making machine for global
customer
Romiter Machinery wins wide reputation for products with high
efficiency, excellent reliability, easy maintenance and long
lifespan. Romiter has an excellent technical support team,
including highly experienced machinists and service technicians.
All our machines equip with reliable brand components. This enables
us to provide our customers with continuous high quality and
state-of-the-art onion processing machine at competitive prices.
Adhering to the principle of managing scientifically and honesty
and credit,our factory has passed ISO9001-2000 quality system
certification.
Romiter Machine meat Europe Quality Requirement. with CE
Certification, Customer do not need to worry about the import