

Add to Cart
Office Cell Phone Signal Boosters PICO Repeater Large Area 200㎡ - 500㎡
PICO Repeater Description:
Cell phone Signal booster help end users to improve mobile signals for much better phone call quality and smoother data transmission.
Can we not use mobile phones? The answer is definitely NO. But it might be much more miserable that the communication can’t be achieved due to no or weak signals though there is a mobile phone.
How to solve the problems?
Best Solution:
Plug & play: Purchase a set of booster solution and install it
at your home, offices, and plug on the power and immediately you
would be able to enjoy the full bar and high quality signals!
The repeater improves mobile signals with no negative impact on
human health.
PICO Repeater Features:
1. Cost effective solution for weak signal zones, reduce drop/off calls.
2. Compact size, low power consumption,
3. easy installation, great cover.
4. Expansion and extending of the signal of base station.
5. Optimization of the quality of the signal and source
6. Cover about 200~500m² without block or obstruct.
7. High linear design, ALC function design, low interference to BTS.
8. Support any cellular devices (voice & data & video)
9. Wide band signal booster, or customize selective band booster.
10. can customize other system CDMA800/GSM850,GSM900, EGSM, DCS1800, PCS1900,WCDMA,etc
11. Plastic case, very good cooling system.
PICO Repeater Advantages:
1. can customize the middle Cover Image on the Booster, design private styles
2. LED Display Panel, Intelligent mode setting
Smart function called which can be activated via the LED display
panel.
Users can check working situation by LED Digital Panel.
Install the repeater simple and efficient.
3. Full set package, beautiful design.
1) 1 X Signal Booster
2) 1 X High Gain small directional Panel antenna.
High Gain 9dBi outdoor directional Panel antenna(optional)
3) 1 X Indoor 2.5dBi Omni Whip antenna
4) 1 X 12 meter coaxial cable
5) 1 X 100-240V AC power adapter for the Booster unit
6) 1 X English User's Manual
4. Plastic case, very low weight, lower freight.
Signal Strength LED | Clear view of the signal strength, will know strong or weak. MAX signal strength are 5 bars. MIN signal strength are 0 bars. |
DC 5V LED | Power supply DC 5V , When high voltage or low voltage, the "DC 5V" will flash. |
ALC LED | The 30dB ALC is used for maintaining steady output power. When ALC 5-10dB, “ALC LED” will flash. |
ISO LED | Isolation function. When the repeater have self oscillation or put antenna in wrong position, the "ISO LED" will flash. Booster will auto shut down. |
Application:
To expand signal coverage or fill signal blind area where signal is
weak or unavailable.
Indoor: Hotels, Home, Basements, Shopping Malls, Offices, Parking
Lots, Shop.etc.
PICO Repeater Specification.
Frequency Range | Uplink | Downlink | ||
GSM850 | 824- 849MHz | 869-894MHz | ||
Max. Gain | 60dB | 65dB | ||
Max. Output Power | 13dBm | 17dBm | ||
Band width | Wide Band | |||
Manual Gain Control | 31dB / 1dB Step | |||
Automatic Gain Control | >30dB | |||
Ripple in Band | CDMA,GSM≤6dB; DCS,PCS≤8dB; | |||
Noise Figure | ≤ 6dB | |||
VSWR | ≤ 2.0 | |||
Intermodulation Products | 9KHz~1GHz | ≤ -36dBm | ||
1~12.75GHz | ≤ -30dBm | |||
Spurious Emission | 9KHz~1GHz | ≤ -36dBm | ||
1~12.75GHz | ≤ -30dBm | |||
Time Delay | ≤ 1.5 μs | |||
Frequency stability | ≤ 0.01ppm | |||
MTBF | > 50000 hours | |||
Impedance | 50 ohm | |||
Power Supply | AC 90-264V,DC 5V/2A | |||
Power LED | Power indicator | |||
Signal Strength LED | Clear view of the signal strength, will know strong or weak. MAX signal strength are 5 bars. MIN signal strength are 0 bars. | |||
DC 5V LED | Power supply DC 5V , When high voltage or low voltage, the "DC 5V" will flash. | |||
ALC LED | The 30dB ALC is used for maintaining steady output power. When ALC 5-10dB, “ALC LED” will flash. | |||
ISO LED | Isolation function. When the repeater have self oscillation or put antenna in wrong position, the "ISO LED" will flash. Booster will auto shut down. | |||
Mechanical Specification | ||||
RF Connector | SMA-Female | |||
Switch | Power Switch | |||
Cooling | Heatsink Convection cooling | |||
Humidity | < 90% | |||
Operating Temperature | -20°C ~ +55°C | |||
Environment Conditions | IP40 | |||
Installation Type | Wall Installation | |||
Size | 120*111*21mm | |||
Weight | < 0.6Kg |
How does the Booster benefit you?
Reduce drop calls and improve voice communication quality.
Speak and be heard clearly on your cell phone without feeling
dropped down.
Stay Connected ... Wireless.
Complete Systems are Easy to Install.
PICO Repeater Application Diagram: