4 Sub - Bands Cell Phone Signal Boosters 75dB 23dBm 2100MHz With SMS Control

Brand Name:GREETWIN
Certification:SGS, ISO9001,CE,ROHS
Model Number:GW-23DR-W
Minimum Order Quantity:1pcs
Delivery Time:3 Working Days After Received Payment
Payment Terms:T/T, L/C
Contact Now

Add to Cart

Active Member
Location: Shenzhen Guangdong China
Supplier`s last login times: within 1 hours
Product Details Company Profile
Product Details

75dB 23dBm 2100MHz 4 Sub-bands Cell Phone Signal Boosters with SMS Control


Model. GW-23DR-W


Signal Booster Description:


Greetwin GW-23DR-W Model can amplify radio coverage for up to five independent frequency bands for different mobile radio providers. The device provides the most cost-effective solutions to improve user experience of high quality mobile services in small to medium sized indoor areas such as houses, hotels, hot spots, shops, offices, meeting rooms, apartments, and so on.


The machine is a kind of digital repeater which is single band of WCDMA 2100 with 4 sub-bands. The 4 sub-bands can work independently without any influence with each other. It’s designed to support one mobile system and help mobile operators to amplify their own mobile signals. It supports to adjust the sub-band and the channels by software to adapt to the operators’ requirement s without any change on the hardware. The repeater is also equipped with OMT / OMC remote control and monitoring system allowing to configure and control the device operation remotely via PC or wireless modem (optional function). The built-in backup battery will ensure the operation of the device even with a sudden power failure (optional function).



Signal Booster Features:

1. Stably working,low power consumption,fit in with industry standard

2. Digital technology, many SAW filters ensures enough output level and out-band suppression.

3. High isolation,strong compatibility,convection cooling,light weight, convenient installation.

4. Local RJ45 monitoring and remote monitoring conform to communication monitoring protocol standard, which is convenient for engineering commissioning and maintenance.


Signal Booster Equipment Compoments:

Digital repeaters main compoments as follows:

CopomentsSpecificationsQuantityUnitRemarks
Main MasterNXWXSB2018212301111Piece
Network Line1M*R451Piece
Ground Wire1.5mm²1.5MeterEnded with metal sheet
Expansion screwM4*100mm4Piece
Mounting bracket/2Piece
Mounting bracket screwM6*14mm4Piece
Whip Antenna800~2700MHz1PieceUsed for Modem

Signal Booster Working Principle:

The principle of Digital Band Selective Repeater is the downlink signal received by the Donor Antenna of the base station shall be sent to a band selective filter via duplexer to be filtered and to be amplified by the downlink band selective amplifier to a proper level. The Coverage Antenna via a duplexer shall emit the downlink signal. Similarly, the signal received by the Re-transmission Antenna shall have its level adjusted to a regulated level by a uplink band selective amplifier after it is filtered. The Donor Antenna will emit it after it is filtered and sent to the duplexer.


Signal Booster Panel interface description:


No.ItemsDescription
1BaffleOpen it, SIM card socket and RJ45 interface inside
2MODEMSMA-female jack, connect to a whip antenna with SMA-male jack
3RUNPower indicator
4ANTIndoor service antenna, SMA-female jack
5BTSOutdoor donor antenna, SMA-female jack
6GNDEquipment grounding
7ACPower Supply: AC 220V

Signal Booster Specifications:


OptionsUplinkDownlink
Frequency range3G 21001920-1980MHz2110-2170MHz
Bandwidth3G 21004 subranges, each 0.2 ~ 15 MHz, adjustable and adjustable within the frequency range of 2100 MHz in 0.2 MHz steps
Max. gain75±2dB80±2dB
Max output power30±2dBm33±2dBm
Manual gain control (step down)≥31dB/1dB step
1-10dB︱△︱≤1.0dB
11-20dB︱△︱≤1.5dB
21-30dB︱△︱≤2.0dB
VSWRentrance≤ 2.3
exit≤ 2.3
Noise factorstandard ≤ 8dB, Max. ≤ 9dB
Group delay≤ 7us
Frequency stability3G 2100± 0,01 ppm 3GPP TS 25.143 ( V 13.0.0 )
Function Elements
Moving strip3G 2100The frequency subbands can be mobile within the range of 60MHz
Adjustable bandwidth3G 2100The frequency subbands can be tuned from 0.2 MHz to a maximum of 15 MHz
LED system indicatorsALC is not active---Green
ALC active <45dB---Flashing green 1 time / 3 seconds
ALC active ≥ 45dB---Flashing green 1 time / 1 second
ALC active (51dB) ends---Blinks red 1 time / 1 second
LED control indicators

Start indicator

The monitoring module is working correctlyFlashing green 1 time / 1 second
The monitoring module does not work correctlyOff

Indicator modem

SIM card not insertedOff
SIM card inserted, but no signalRed
SMS communication modeFlashing green 1 time / 1 second
GPRS communication modeBlinking green 2 times / 1 second
GPRS communication errorBlinks red 1 time / 1 second

Alarm indicator

No alarm itemsGreen
There are elements of anxietyRed
DC FailureOff
Mechanical parameters
ConnectorsN-Female
Dimensions385mm(exclude connector 20mm)*200mm*45mm
The weight4.46KG
Type of instalationWall Mount
GroundingExternal ground (housing)
Electrical parameters
Source of powerIncoming AC 100 ~ 240V, 50 ~ 60Hz, outgoing DC12V / 7A
Power Consumption55W
Input and output impedance50 Ohm
Environmental parameter
Working temperature-25℃ ~ +55℃
Environmental conditionsIP40
Software
Local monitoringPC via Ethernet port
Remote monitoringvia SMS or GPRS (additional function)
Controlled parametersGain, Frequency, Repeater On / Off, Alarm
Monitoring parametersGain, frequency, repeater on / off, alarm message
AlarmRepeater failure, power failure, ALC alarm (signal gain level), etc.

FAQ:
1. After installing booster signal not be very good, indoor signal coverage very small ?
> Adjust outdoor antenna's location and direction
> Change another high gain outdoor antenna
> Check whether cables are connected well
> Change more powerful repeater

2. Cell phone signal full bar, but communication quality bad ?
> Much closer distance between indoor and outdoor antenna, separate them with a longer distance.

3. After installing booster not only signal be good, but also more bad ?
> Much closer distance between indoor and outdoor antenna, separate them with a longer distance.

4. Working good for long time, suddenly signal bad ?
> Check whether outdoor cable connectors are flooded
> Check whether power light is working normally
> If cables are not flooded and power light is working normally, the booster should has problems and need to be sent back to factory for repair.


Signal Booster Application:

Signal Booster Installation:

The booster is fixed onto the wall through expansion bolts.
A. Drill holes on the targeted place and install expansion bolts.
B. Align the holes with the expansion bolts, place flat washers, spring washers, and nuts in turn, and tighten the nuts to fasten the installing support.
C. Place the booster on and fasten it.
D. Connect cables and power cables to the booster respectively.
E. After installing the booster as described above, power on the booster to check the operation status.


Signal Booster Connection:
A. BTS Port: donor antenna cable is connected with Outdoor Port;
B. MS Port: service whip antenna is connected with Indoor Port;
C. DC IN: connected with Power adaptor.


Our Workshop:


Our Company:

Greetwin Tech is a strong and reliable factory, focusing on the R&D and Manufacturing of Digital ICS Repeater, RF Repeater, Indoor Signal Distribution System, Trunk Amplifier, Band Selective Repeater for more than 10 years.

China 4 Sub - Bands Cell Phone Signal Boosters 75dB 23dBm 2100MHz With SMS Control supplier

4 Sub - Bands Cell Phone Signal Boosters 75dB 23dBm 2100MHz With SMS Control

Inquiry Cart 0