

Add to Cart
30dBm LTE 800MHz Signal Mobile Booster Signal Repeater Amplifier
A cell phone signal booster (also known as amplifier or repeater)
is made up of three main elements - exterior antenna, amplifier,
and interior antenna. They form a wireless system to boost cellular
reception.
A cell phone reception booster is generally a repeater system that
involves the amplifier adding gain or power to the reception in
various directions. Even for a cheap cell phone signal booster,
maximum gain differs by application. The work of an outside antenna
is to both receive and transmit signals to a cellular tower with
enhanced power and sensitivity. Usually, the dB gain is never below
7 dB and can be over 10 dB gain. The system's elements conduit is
the coaxial cable. It is also a factor in transmission loss.
The main aim of the cellular phone signal booster is taking the
existing cell phone signal around your car, office, workstation, or
home and amplifying it. After amplification, the signal is
rebroadcasted to the area with no reception or weak signal. Apart
from consisting of an amplifier to boost the reception, external
antenna, and internal antenna, there're cell phone boosters with
indoor antenna and amplifier as a single unit making them superb
indoor cell phone signal boosters. In most cases, the three
components are detached. Other optional components include the
Attenuator (reduces unwanted frequency signals), Lightning Surge
Protector, Splitter, and Tap.
Features:
1. Cost-effective solution for weak signal zones, reduce drop/off
calls.
2. Compact size, low power consumption, easy installation, great
cover.
Expansion and extension of the signal of the base station.
Optimization of the quality of the signal and source
3. High linear design, ALC function design, low interference to
BTS.
4. Support any cellular devices (voice & data & video)
5. Wideband signal booster, or customize selective band booster.
6. Support System CDMA800, GSM, DCS, PCS, WCDMA, LTE 4G, etc
Advantages:
1. Smart Function, Intelligent mode setting
smart function called which can be activated via the front panel.
users can adjust gain and choose working band by LED panel, This
smart function is easier than DIP Switch, can set up parameters, It
is a simple, safe, and effective way.
2. Auto Level Control
The 30dB ALC is used to maintain steady output power even when the
donor source signal fluctuates.
3.ODM/OEM service is available.
Parameter:
Frequency Range | Uplink | Downlink | |||
iDEN | 806-824MHz | 851-869MHz | |||
CDMA 800/GSM 850 | 824-849MHz | 869-894MHz | |||
LTE800 | 832-862MHz | 791-821MHz | |||
AWS1700 | 1710-1755MHz | 2110-2155MHz | |||
DCS 1800 | 1710-1785MHz | 1805-1880MHz | |||
PCS 1900 | 1850-1910MHz | 1930-1990MHz | |||
WCDMA/3G 2100 | 1920-1980MHz | 2110-2170MHz | |||
Max. Gain | 75dB | 80dB | |||
Max. Output Power | 27dBm | 30dBm | |||
Band width | Wide Band | ||||
Manual Gain Control | 31dB / 1dB Step | ||||
Automatic Gain Control | >20dB | ||||
Ripple in-band | ≤ 6dB | ||||
Return loss | ≤ -10dB | ||||
Noise Figure | ≤ 6dB | ||||
Spurious Emission &Intermodulation | 9KHz~1GHz | ≤ -36dBm | |||
1~12.75GHz | ≤ -30dBm | ||||
WCDMA | Spurious Emission Mask | Meet 3GPP TS 25.143 ( V 6.2.0 ) | |||
Modulation Accuracy | ≤ 12.5% | ||||
Peak Code Domain Error | ≤ -35dB@Spreading Factor 256 | ||||
Time Delay | ≤ 1.5 μs | ||||
Frequency stability | ≤ 0.01ppm | ||||
MTBF | > 50000 hours | ||||
Power Supply | AC100-240V,DC9V/5A | ||||
Power LED | Power indicator | ||||
Alarm LED | Red | Autoexcitation or High Power | |||
Green | Standard | ||||
Mechanical Specification | |||||
RF Connector | N-Female | ||||
Switch | Power SwitchManual Gain Control Switch | ||||
Cooling | Heatsink Convection cooling | ||||
Impedance | 50 ohm | ||||
Humidity | < 90% | ||||
Operating Temperature | -10°C~55°C | ||||
Environment Conditions | IP40 | ||||
Size | 268mm*58mm*189mm | ||||
Weight | < 3Kg |
Recommended Accessories:
1)Donor antenna: Log Periodic Antenna (9dBi, 806-960/1710-2700MHz)
2)Service antenna: Omni Ceiling Antenna (3dBi,
806-960/1710-2700MHz)
3)5D-FB coaxial cable with connecter (Cable length optional)