Environmental Testing Equipment 30M³ Chamber For Air Purifier Solid Contaminant Removal Test

Environmental Testing Equipment 30M³ Chamber For Air Purifier Solid Contaminant Removal Test

30m³ Test chamber of air cleaner

Model: JHQ-1 Environment test chamber of air cleaner

Overview:

According to relevant requirements stipulated in GB/T 18801-2015 Air Cleaner, this device is

applied to the solid pollutant removal testing(natural attenuation test of solid pollutants, total

attenuation test of solid pollutants, calculation of clean air delivery rate of solid pollutant removal

of air cleaner), gaseous pollutant removal test (natural attenuation test of gaseous pollutant, total

attenuation test of gaseous pollutant, calculation of clean air delivery rate of solid pollutant

removal of air cleaner ), service test of air cleaner and other test.

Technical parameters:

1. Dimension: 3400 ×3500 ×2500 (3400 ×3500 ×2500), allowable tolerance ±0.5m³

2. Structure: Warehouse board or frame is equipped with glass.

3. Observation window: 1000*700.

4. Door: 2000*800.

5. Sealing material: Use silicon rubber bar and glass sealant with low volatility.

6. Mixing fan: Diameter 1400mm, metal vane, degree of mixing of chamber is greater than 80%.

7. Circulating fan: (500-700)m3/h, diameter 20cm, installation location: 1.5m above the ground,

0.4m away from rear wall.

8. Sampling hole : 3+3 pollutant filling and sampling port: Located at the front wall and the right

side wall respectively; ball valve control, with flexible hose.

9. Lighting: 2 sets of cleaning luminaries with dual tubes.

10. Cleaning system (internal cleaning system): Primary efficiency filter screen, intermediate

efficiency filter screen, high efficiency filter screen, activated carbon filter screen (activated

carbon filter screen of formaldehyde testing chamber shall be thickened properly).

11. Temperature and humidity sensor: Humidity: 30-90%RH±3%RH; temperature: 10-50℃

±0.3℃.

12. Air circulation flow, refrigerating capacity, heating capacity, humidifying capacity and other

parameters shall be determined by yourself according to operating conditions said above.

However, the time taken from normal temperature to steady working condition shall not be

greater than 20min, and the standard temperature is (25±2) ℃and the relevant humidity is (

50±10)% during test of testing chamber.

13. Power supply of prototype: Single-phase 50-300V, 50Hz, capacity 1kW.

14. Control parameters: Under automatic testing state, all working processes are in accordance

with standards.

Guangzhou Kinte Electric Industrial Co., Ltd. is a wholly-owned subsidiary of CEI, which perfectly integrates research & development, manufacturing , sales and services. It is mainly engaged in general contracting of household appliances and household appliance analogs’ plant equipment, export of equipment and laboratory specially for manufacturing household electrical appliances, development and mould manufacture of household electrical appliances, export of parts and components of household electrical appliances, export of conveyor line and automatic testing equipment, household electrical appliances, motorcycle and automotive painting line and production line, manufacture and trade of surface treatment production line and evaporation energy saving equipment.

Kinte has undertaken a large number of national, provincial and municipal knotty-problem-tackling scientific research projects. From 1998 to 2011, over 600 scientific and technological achievements were made, including over 380 outstanding scientific and technological achievements, of which there are 9 national achievement awards, 146 provincial and ministerial achievement awards, and 63 municipal achievement awards. Over 100 national patents have been awarded , with the transformation rate of scientific and technological achievements reaching up to 85%. Kinte has won the national technological market “Golden Bridge Award” for five times in 10 consecutive years,which holds every two years. Besides, Kinte owns multiple certificates, such as “Certificate for Foreign Engineering Contract of the People’s Republic of China” issued by the Ministry of Commerce of the People’s Republic of China (the only company with this certificate in Chinese household electrical appliance industry), “Engineering Design Certificate (Class A)” issued by the Ministry of Housing and Urban-Rural Development of the People’s Republic of China and “Special Engineering Design Qualification Certificate” issued by the Ministry of Environmental Protection of the People’s Republic of China.

Taking Kinte Manufacture System (inclusive of Guangzhou Kinte Electric Industrial Co., Ltd., Anhui Kinte- Weijia Equipment Manufacturing Co., Ltd. and Guangzhou Kinte Desheng Intelligent Equipment Co.,Ltd.) as the core, Kinte has formed a huge industry chain supported by many strategic partnership manufacturers, in addition to owning premium and perfect design development system and project management team. It is recognized as an integrator in household electrical appliance manufacturing industry.