Benchtop Autoclave Steam Sterilizer , Rapidly Sterilizing Autoclave Laboratory Equipment

Benchtop Autoclave Steam Sterilizer 20L 24L Fast Speed Sterilizing

Model: MCS-XB20J

Charcteristucs:

1. Indicator light indicates working state.
2. For 4~6 minutes rapidly sterilizing.
3. Sterilizing temperature and time can be preset.
4. Steam-water inner circulation system: no steam discharge,and the environment for sterilizing will be clean and dry.
5. Over temperature & over pressure auto-protection.
6. Safe protection of water lacking.
7. Exhaust the cool air automatically.
8. With three stainless steel sterilizing plates.
9. The chamber of the sterilizer is made of stainless steel.
10. Automatically shut off with beep reminding after sterilization.

Technical data:

The working environment and condition of the product:
1) environment temperature: 5~40℃
2) Relative humidity: ≤80%
3) Atmospheric pressure range: 86~106 KPa
4) Power supply:
AC220V±11V, 50Hz±1Hz ( should have ground lead)
Transport and storage environment and condition:
1) environment temperature: -10~50℃
2) Relative humidity: 10%~90%
3) Atmospheric pressure range: 50~106 KPa
With over-temperature, over-pressure auto-protect device:
1) This product equipped with safety valve, and will auto release when steam pressure over 34Psi(0.24MPa).
2) The power will be cut -off automatically, the water be cut off and alarm when the heating tube temperature over 150 ℃ in the course of drying.

Structure & Working principle
General structure
This product buildup by sterilize chamber, instrument plate, water tank and control system (fig.1)

Working principle

The sterilizer is designed by using gravity type pressurized steam sterilization principle. Put 0.6 liter of distilled water into sterilization chamber, use electric heater to heat directly to produce pressurized steam. The pressurized steam act with microorganism on the objects to be sterilized to destroy its structure and reach the purpose of sterilization.

Installment & Adjustment
l) The Sterilizer should be put on a horizontal working table with all four supporting feet contacting the table surface evenly,
2) Adjust two front adjustable supporting feet to make the angle of axis line of the sterilizer and the table surface about 4º, so that the 0.6 liter water can be fill into the tank and objects to be sterilized could be put in the instrument plate stably and the discharge of the leftover water in sterilization chamber could be thorough and clean (See Figure 3);

3) Check to see whether the power supply condition conforms to the product specifications.

OPERATION of the steam sterilization:
l ) The preparation and inspection before use
1.l Put the sterilizer stably on a horizontal working table, adjust the adjustable supporting feet, make the angle of axis line of the sterilizer and the table surface about 4º
l.2 Check power supply
l .2. l Power supply data conform to product requirement. Single phase (AC220V, 50Hz).
l .2,2 Connecting to the power supply
l.3 Make a reliable earth connection.
1.4 Prepare 4 liters of distilled water.
l.5 The binding of dressing and textile can not be too tight
1.6 Certain amount of sterilization indicator (chemical indicating piece or biologic indicating piece)'
1.7 There should be water containers under the overflow and drain outlet of the sterilizer.

Guangzhou MeCan Medical Limited is a professional medical and lab equipment manufacturer and supplier . We mainly engage in supplying different kinds of medical equipment, laboratory equipment that are used in hospitals and clinics, schools and universities.

Our main products includes Laboratory Equipment, Ultrasound Machine, Hearing Aid, CPR Manikins , X-ray Machine and Accessories, Fiber and Video Endoscopy, ECG&EEG Machines, Anesthesia Machines, Ventilators, Hospital furniture , Electric Surgical Unit, Operating Table, Surgical Lights, Dental Chairs and Equipments , Ophthalmology and ENT Equipments, First Aid Equipment , Mortuary Refrigeration Units , Medical Veterinary Equipment ,etc.

The partners that we work with include some famous local Chinese factories. Besides, we have good relationships with many factories. Therefore, the price of our most products is competitive and for the after-sell service. Our vision is to be one of the best and the most professional one-stop medical and lab equipments supplier in China.

Towards this Vision, we have explored our market in different countries, for example, we have clients who are from Africa (like Nigeria, South Africa, Zimbabwe, Kenya, Zambia, Namibia, Congo, Uganda, etc), Southeast Asia, North America , South America, Europe, and Middle East , etc.

In the past years, our company operates our business with the management philosophy of “Customer First, Service Forever”. We are proud of the supporting with our perfect quality of products and timely service systems. Our Product sales network covering nearly 200 countries and regions, over 2000 hospitals, clinics, and school labs.

Our advantage: Factory Price , Superior quality product with excellent service , and fast delivery. After-sale service is guaranteed by long-term warranties and excellent technical support.

MeCan Medical is your first choice of equipment for hospitals and clinics, and school labs.