SP1B07 Phoenix Air Balloon Spring Suspension M8 Blind Nuts Press Rubber Air Spring

SP1B07 Phoenix Air Balloon Spring Suspension M8 Blind Nuts Press Rubber Air Spring

Product Description

Technical Data

1. Top Cover Plate Diameter: 135mm

2. Air Inlet: G1/4

3. Threaded Hole: 2XM8X1.25

4. Distance Between Air Hole and Threaded Hole: 26mm

5. Diatance Between Threaded Holes: 53mm

6. Bottom Cover Plate Diameter: 135mm

7. The Rubber Bellow Max.Diameter: 215mm

8. Max.Height: 115mm

9. MIn.Height: 50mm

10. Compression Height: 65mm

Bellows Cylinders Application

• Scissor Lift
• Hopper Vibration and Damping
• Mechanical Handling Stop
• Quick Lock Device
• Reel Tensioning
• Machine Isolation
• Direct Force
• Impact Absorbtion
• Roller Tensioning
• Platform Lift
• Short Stroke Mechanical Linkage
• Hot Foil Stamping Press

Phoenix SP-1B Single Convolution Industrial Air Spring

How to Replace an Industrial Air Spring

1. Before installing the industrial air spring, evenly apply the lubricant (tire lubricant) to the upper and lower bases of the spring to reduce the friction caused by installing the new industrial air spring, and at the same time protect the industrial air spring and its contact position from damage .
2. Place the new industrial air spring on a dry flat surface, firmly hold both sides of the spring with both hands, and press down on the spring until the volume of the spring is enough to fit the "upper and lower base" range.
3. When installing, combine the bottom of the industrial air spring with the lower base, and then adjust the top of the spring to enter the upper base; when the industrial air spring is basically located between the upper and lower bases, open the air pressure valve to inflate the spring; at the same time, Maintenance personnel need to stabilize the projectile with both hands to prevent excessive displacement.
4. After inflating for 10 to 15 seconds, the industrial air spring is fully inflated. At this time, spray foam water on the elastic body, and carefully check whether the new industrial air spring is well sealed and whether the elastic body is damaged. If there is no problem, the installation will be completed and it can operate normally.

The Real Pictures of SP1B07 Phoenix Air Balloon Spring

Guangzhou Guomat Air Spring Co., Ltd. is located in Guangzhou, about 15min’s drive from Baiyun Airport. Our mainly products are air spring, rubber bellows, air suspension spring, air suspension compressor and refitted suspension system. They are widely used in bus, truck, cabin, vehicles’ seat, luxurious car and industrial machine field.

GUOMAT Factory gate：

Established in 2008, Our company covers 20,000㎡ and is located in Taihe Town Baiyun District. With the rapid development of our company, we are equipped with modernized workshop and advanced rubber air springs equipments now. We are the first company who started air spring business and has become one of the largest air spring manufacturing bases in China.

In 2017, we launched a collaboration with High Tech of US customers to customize the products of our customers and the logo of our customers. Every year, there are about 10,000 orders. In continuous cooperation, the products meet the international inspection standard ISO/TS16949:2009, and the customers are very satisfied with the products produced. This is our high recognition from American customers and also gives us Great motivation.

In 2018, we started cooperation with German GmbH, mainly industrial air springs, which are suitable for industrial equipment. We have successfully developed and produced the natural air-seal of the skin to reach the 700mm flanged air spring, the customer's annual demand is a few hundred.

With the development of business and demand for customers, our company introduced business with TomLog Corporation in 2010, our strategic cooperative partner in Taiwan. Then we developed air compressor program and air spring related business, in 2015, America Goodyear Corporation met with the transfer of shares in the North American plant, our company was granted with sale agent for air springs in China, providing more choice for our customers. Our company adopts the most advanced domestic air spring processing equipment and international production technology. Combined with unique production process, our company strictly execute international standards for production and spare no efforts to create the world-class products. We will endeavor to make air spring widely used at home and abroad, and let more and more customers to enjoy the best damping effect.