High Voltage Battery LiFePO4 Battery Pack , UPS LFP Rechargeable Batteries , OEM Acceptable

1. General Information

This specification defines the performance of rechargeable LiFePO4 battery pack TB38450F-T112A manufactured by SHENZHEN TOPBAND BATTERY CO.,LTD, describes the type, performance, technical characteristics, warning and caution of the battery pack. This system Include 4 pack modules, 1 control module, and 1 standard 19”cabinet.

2. Specification(@Battery initial Temp25±5℃)

3. Product Performance

Standard Test Conditions:

Unless otherwise specified, all performance tests is required conducted at temperature 25℃±2℃, Humidity less than 45%~75%RH.

Unless otherwise specified, the tested product is required unused within one month after outgoing.

4. Protective circuit specification

The Battery Management System (BMS) can monitor and optimize every single prismatic cell during charge & discharge, to protect the battery pack overcharge, over discharge, short circuit. Overall, the BMS helps to ensure safe and accurate running.

5. Instructions

1. Transportation

² Based on the character of cell, proper environment for transportation of LiFePO4 battery pack need to be created to protect the battery.

² Battery should stay in the warehouse 15℃～35℃ where it’s dry, clean, shade, and well-ventilated.

² The battery should be stored in 50% SOC during transportation.

² The battery needs to be charged every 6 months if out of use

² Keep the battery against dropping, turning over and serious stacking during loading.

² Ensure the single 96V50Ah battery module in the independent package and keep it face up.

1. Install instructions

Step1: Install single battery module to a standard 19” cabinet through 4 pcs M6 screws.

Note:Fix the battery module according to the module serial number. Install 1_st module in the bottom, and the control module in the top.

Diagram 1 :Battery module view

Step2: Electrical connection

1st: Connect the CANBus between battery modules and control module；

2nd:Connect Battery power cable between modules as shown below；

3rd: Connect the Output power cable

4th: Connect the RS485 external communication port to UPS；

5th: Press on switch, and then can start the system output.

Note:When user needs to stop output and disconnect the system,reverse the above operation order.

Diagram 2 :System install schematic

6. Warning & Tips

² Please read and follow the specification and caution remarks on battery surface before use the battery. Improper use may cause heat, fire, rupture, damage or capacity deterioration of the battery. SHENZHEN TOPBAND BATTERY CO.,LTD. Describes is not responsible for any accidents caused by the usage without following our specification.

² The battery must be far away from heat source, high voltage, and avoid to be exposed in sunshine for a long time.

² Do not put the battery in a charger or equipment with wrong terminals connected.

² Never connect the positive and negative of battery with metal.

² Avoid excessive physical shock or vibration. don't hit, fall, stamp on the battery

² Without the permission of the manufacturer and guidance, forbidden to remove or to assemble the battery

² Do not use the battery mixed with other different manufacturers, type, or model batteries.

² Keep the battery against high temperature. Otherwise, it will cause battery heat, get into fire or lose some function and reduce the life.

² When battery run out of power, please charge your battery timely (≤15day).

² Please use the matched or suggested charger for this battery.

² If battery emits a peculiar smell, heating, distortion or appears any abnormity during working or storage, please stop using and take it out from the device.

² If the battery leaks and get into the eyes or skin, do not wipe, instead, rinse it with clean water and see doctor immediately.

² Please far away from children or pets.

² Do not put disuse battery into a fire or water.

7. Battery operation instruction

7.1 Do not surpass the largest charging current that the specification stipulated.

7.2 Do not surpass the highest limited voltage that the specification stipulated.

7.3 Charging temperature:within temperature scope that specification stipulated.

7.4 Charge with constant current, then with the constant voltage, no reverse charge, which is dangerous

7.5 Special note:

Short time doesn't affect the use of the battery overcharge too, but for a long period of time over discharge or over charge can affect the function of the battery failure, or the battery can't use permanent, appear serious safety hazards, need a long time floating please use the recommended floating model specification.

8. Other Chemical Reaction

Because batteries utilize a chemical reaction, battery performance will deteriorate over time even if stored for a long period of time without being used. In addition, if the various usage conditions such as charge, discharge, ambient temperature, etc. are not maintained within the specified ranges, the life expectancy of the battery may be shortened or the device in which the battery is used may be damaged by electrolyte leakage. If the discharge time is much shorter than the normal after fully charged, even battery is charged correctly, and this may indicate it is time to change the battery.

Shenzhen Topband Co., Ltd. was registered in so-called “China Silicon Valley”, Shenzhen Hi-tech Industrial Park in 1996, and got listed in Shenzhen Stock Exchange ( the stock code as 002139) in 2007.

After years of rapid development, now Topband takes lithium battery as the core technology and has become one of the leading suppliers of lithium battery solutions in China, focusing on nano lithium iron phosphate/ LiFePO4 technology for EV, RV/ caravan, marine, motorcycle, golf cart / trolly, UPS, solar storage, medical, floor scrubber, industrial, commercial use, etc.

Topband has more than 5000 staffs, covers an area of 100,000 square meters. And large production plants are mainly located at Shenzhen and Huizhou

Our R&D team of over 300 professionals, in cooperation with Tsinghua Research Institute and Harbin Industrial University have laid a firm foundation of our leading technology.

We have got the certificates of ISO9001, ISO14001, OHSAS18001, TS16949 and UL, CE, CB, UN38.3, TUV, etc.

Topband is a Hi-tech enterprise. Since the company established, with innovation, we have committed ourselves to making people’s lives more comfortable and high-efficient. We and our companions are working hard at making technology progress to let people enjoy the changes of new technology.