

Add to Cart
SS304L, SS316, SS316L Plain Weave Pattern, 280 Mesh/Inch Square
Wire Mesh
Stainless steel square aperture 280mesh wire mesh including 280
wires and openings per inch. Mesh counts, wire diameter, aperture
sizes of warp wire and weft wire are the same. Plain Weave Wire
Cloth Weave is the most common wire cloth used and it is one of the
simplest wire cloths. The plain wire cloth are not crimped before
weaving, and each warp wire passes over/under the wires running
through the cloth at 90 degree angles. The plain weave wire cloth
has numerous applications
Materials: SS304, SS304L, SS316, SS316L and other stainless steel alloy.
Aluminum, copper, nickel metal materials available.
Weaving Type: Plain Weave: also called tabby weave, linen weave or taffeta
weave, is the most basic type of weaves. In plain weave, the warp
and weft are aligned so they form a simple criss-cross pattern.
Each weft thread crosses the warp threads by going over one, then
under the next, and so on. The next weft thread goes under the warp
threads that its neighbor went over, and vice versa.
Features:
With good performance of acid resistance, alkali resistance, high
temperature resistance, low temperature resistance, wear
resistance, etc.
Applications:
Stainless steel wire cloth are widely used in different industries,
mostly used as air conditioners, automotive starter systems, fuel
tanks, filter jugs, water pumps, medical supplies, vacuum cleaners,
coffee makers, centrifuges, water purifiers, direct drink
dispensers, filters, excavators, etc.
Specifications:
Mesh | Wire Diameter | Aperture | ||
mm | Inch | mm | Inch | |
280×280 | 0.030 | 0.0012 | 0.061 | 0.0024 |
0.036 | 0.0014 | 0.055 | 0.0022 | |
0.040 | 0.0016 | 0.051 | 0.0020 | |
1) Roll Size Standard Width: 48” Standard Length: 100ft 2) Sheet Size Cut as your required shape and size. |
Other specifications according to your requirements.
Packing: Water-proof paper first then plastic film, in wooden case or
pallets.