Wall Mount Fiber Optic Patch Panel Single Mode Pigtail Optical Distribution Frames

Wall Mount Fiber Optic Patch Panel Single Mode Pigtail Optical Distribution Frames

1. Features:

Description: rack-mounted fiber patch panel 24 SC simplex sliding type
Applicable in the branch connection of fiber termination, work as distribution box
19-inch standard structure, rack mounted
Available for the installation of FC, SC, ST, LC adapters
Size: 450*277*1U
The body is made of cold rolled steel sheet, with electrostatic spraying
We can install adapters for you, available for FC, ST, SC, LC

2. Application:

Telecommunication
CATV
LAN & WAN
Network

Broadband

3. Product Show:

4. Preparation before installation

A. Check the structure and type of fiber cables before installation; different fiber cables could not be spliced together;
B. Seal well the connective components to reduce additional loss to fibers caused by dampness; don't apply any pressure on the connective components;
C. Keep a dry and dustless working environment; don't apply any external force to the cables; don't bend or entwine cables;
D. Appropriate tools should be used for splice of cables according to the local standards during the whole
installation process.

The installation procedure of the box
A. Open the front cover of the box or the top (if necessary), take down the fiber splice tray; let in the fibers
from the fiber entry and fix them on the box; the devices for fixation are as follows: the adjustable collet,stainless fiber cable ring & nylon tie;
B. The fixation of steel core (if necessary): thread the steel core through the fixed device (optional) and screw down the bolt;
C. Leave about 500mm-800mm long spare fibers from the peeled point of fiber cable to the entrance of the splice tray, cover it with plastic protective tube, fix it with plastic tie at the T type holes; splice fibers as
usual;
D. Store the spare fibers and pigtails, plug the adapters in the slots on the tray; or first plug in the adapters and then store the spare fibers, please pay attention to the direction of coiling fibers
E. Cover the splice tray, push in the splice tray or fix it with the slot at the edge of the box;
F. Install the box inside 19" standard mounting equipment.
G. Connect the patch cord as usual.

5. Fiber Optic Patch Panel Specification:

Environment temperature:-25ºC~+45ºC
Relative humidity:≤85%(30ºC)
Atmosphere pressure:70~106KPa
Insulated Resistance:≥2×10MΩ/500V(DC)
Intensity≤15KV(DC)/1minno spark-over and no flying arc
Fiber bending radium guaranteed more than 40mm:≥40mm
Application: It is applicable for straight-through connection and diverged
connection in aerial layout , duct and direct buried. It can protect fiber
connectors.

6. FAQ:

Q1:How to 100% guarantee the insertion loss of the adapters is below 0.1dB/0.2dB?
Firstly the quality of the sleeve , secondly the accurate size of housing,
then 100% inspection in the production is must.
Q2:Why some times too tight or loose when assemble the adapters to the plate?
There is tolerance of the thickness of the plate especially baking finished plate, you must make sure the gap distance is just match the plate thickness.
Q3:How to keep the clearance of the endface of the connectors?
Do not take off the dust cap in transportation and stocking, make sure not to touch the end face with hand. If found dirty or scratch under telescope, please clean it with alcohol.
Q4:What’s the warranty of ADTEK fiber optic patch cord?
We can ensure lifetime warranty as our fiber optic cable is UL approved and all our
fiber optic patch cords are 100% testing passed
Q5: Can we print our logo on the fiber cable jacket?
Yes, of course. You can decide the print on the fiber cable jacket. MOQ is 1KM when
you want to add your logo. No MOQ as neutral printing.
Q6: What is the insertion loss for singlemode?
It is ≤0.2dB (Typical ≤0.1dB)
Q7: Can you do the 3D (interferometer) test?
Yes, we have the interferometer in our factory, we usually do the test as customers
request. Our 30 test passing rate is over 90%.

7. Carefiber care our life:

1.Any question will be replied within 24 hours.
2.Professinal manufacture,Welcom to vist our company.
3.100% test before shipping.
4.OEM/ODM is avaliable(As required print logo and customized color).
5.Fast delivery time(2 days for samples,order 3~7 days for bulk production)

Carefiber Optical Technology Co., Ltd. is one of the leading developers and professional manufacturers of fiber optical technology and high quality fiber optical communication products. We provide Fiber optic patch cord, Fiber optic connector, Fiber optic adaptor, Fiber optic PLC splitter,Fast connector, Fiber optic patch panel,Fiber terminal box,Fiber closure and more. For high-quality patch cord production line equipment, we can also offer insertion and return loss tester, interferometer test machine, connector tip microscope, connector crimping machine, connector polishing machine, connector heating oven, automatic cable cutting machine, etc.

We sincerely invite all interested buyers to visit our company and contact us directly for further information. Carefiber, Care you life.

Carefiber Optical Technology Co., Ltd. (in short name: CFO), established in 2011, is located on the 10th floor (headquarters) of the Jinhua Building, Longhua District, Shenzhen. The FTTX accessories production base is located in the National High-tech Industrial Park of Baise City, Guangxi. The outdoor optical cable factory is located in the Suchu National High-tech Industrial Park, by for now, we currently employ 360 people, and cover an area of 30,000 square meters, up till now the total investment in carefiber is about USD 5 million, specializing in the production of various indoor and outdoor optical fiber cables and optical fiber connectors, the products are widely used by telecom operators in the world. 95% of the products are exported to more than 60 countries around the world.

Carefiber has the ability to produce a full range of optical cables, ABF cables, ADSS, various types of direct buried, pipeline, and aerial optical cables, as well as indoor and outdoor butterfly optical cables, building distribution cables, and access cables. The annual output capacity of optical cables is 3.5 million core kilometers. The FTTX accessories production base is mainly centered on FTTH FTTA supporting facilities, and independently produces PLC splitters, fiber optic fast connectors, fiber jumpers, FTTA base station waterproof jumpers, MPO/MTP 5G data center supporting products, etc., with an annual production capacity of 35 million PCS connector. At the same time, we work with many customers to develop and design optical fiber distribution boxes, optical cable connection boxes, indoor and outdoor cabinets, etc. to meet the needs of different customers for the market and provide customers with one-stop procuring services.

Carefiber people adhere to: "Excellent quality" can be a first-class corporate philosophy, and strive to improve quality products and services that exceed customer needs. Strictly follow the ISO9001 quality management system and ISO14001 environmental management system throughout the entire process to ensure high-quality products and have various international certifications such as CE, ROHS, ANATEL, etc. to guarantee the products required by customers.