FTTH ABS and PC Fiber Optic Distribution Box / 1*32 Way fiber optic junction box

FTTH ABS and PC Fiber Optic Distribution Box / 1*32 Way fiber optic junction box

Distribution box Type outdoor Optical Distribution Boxes is designed to connect feeder/distribution cable to subscriber's drop cable using PLC splitter in FTTx networks. It has 2 input ports and 16 output ports on the bottom and it is easy to install on the wall or pole. The rear tray is for splicing a fiber of feeder cable with PLC splitter and the front tray is for connecting subscriber's drop cable through adaptor plate on the tray.


Feathure:

1) Be made of high impact plastic PC/ABS
2) Can accommodate 1x8 PLC splitter and 1x16 PLC splitter
3) The high strength plastic, anti-ultraviolet radiation and ultraviolet radiation resistant, resistant to rain
4) Up to 16 FTTH drops ,2 inlet ports, 32 outlet ports
5) Wall and pole mountable
6) The design of the two-tier structure, the upper wiring layer optical splitter, lower for fiber splicing layer.


Application:

1) Widely used in FTTH access network
2) Telecommunication Networks
3) CATV Networks
4) Data communications Networks
5) Local Area Networks


Main Technical Parameters:

FAQ:


Q1:How to 100% guarantee the insertion loss of the adapters is below 0.1dB/0.2dB?
Firstly the quality of the sleeve , secondly the accurate size of housing,
then 100% inspection in the production is must.
Q2:Why some times too tight or loose when assemble the adapters to the plate?
There is tolerance of the thickness of the plate especially baking finished plate, you must make sure the gap distance is just match the plate thickness.
Q3:How to keep the clearance of the endface of the connectors?
Do not take off the dust cap in transportation and stocking, make sure not to touch the end face with hand. If found dirty or scratch under telescope, please clean it with alcohol.
Q4:What’s the warranty of Carefiber fiber optic patch cord?
We can ensure lifetime warranty as our fiber optic cable is UL approved and all our
fiber optic patch cords are 100% testing passed
Q5: Can we print our logo on the fiber cable jacket?
Yes, of course. You can decide the print on the fiber cable jacket. MOQ is 1KM when
you want to add your logo. No MOQ as neutral printing.
Q6: What is the insertion loss for singlemode?
It is ≤0.2dB (Typical ≤0.1dB)
Q7: Can you do the 3D (interferometer) test?
Yes, we have the interferometer in our factory, we usually do the test as customers
request. Our 30 test passing rate is over 90%.


Carefiber Service:

Carefiber Optical Technology Co., Ltd. is one of the leading developers and professional manufacturers of fiber optical technology and high quality fiber optical communication products. We provide Fiber optic patch cord, Fiber optic connector, Fiber optic adaptor, Fiber optic PLC splitter,Fast connector, Fiber optic patch panel,Fiber terminal box,Fiber closure and more. For high-quality patch cord production line equipment, we can also offer insertion and return loss tester, interferometer test machine, connector tip microscope, connector crimping machine, connector polishing machine, connector heating oven, automatic cable cutting machine, etc.


Quality Control:


Carefiber always foucuses on reliable quality development. By complying with our qulity policy"Continue to pursue excellent quality, offer the best products and serices in order to realize customer needs and satisfaction", all along we strive for providing excellent products and service to meet and exceed our customer's need. Carefiber constantly works with modern quality management methods to ensure the whole service procedure is implemented flexibly and efficiently.

We sincerely invite all interested buyers to visit our company and contact us directly for further information. Carefiber, Care you life.

Carefiber Optical Technology Co., Ltd. (in short name: CFO), established in 2011, is located on the 10th floor (headquarters) of the Jinhua Building, Longhua District, Shenzhen. The FTTX accessories production base is located in the National High-tech Industrial Park of Baise City, Guangxi. The outdoor optical cable factory is located in the Suchu National High-tech Industrial Park, by for now, we currently employ 360 people, and cover an area of 30,000 square meters, up till now the total investment in carefiber is about USD 5 million, specializing in the production of various indoor and outdoor optical fiber cables and optical fiber connectors, the products are widely used by telecom operators in the world. 95% of the products are exported to more than 60 countries around the world.

Carefiber has the ability to produce a full range of optical cables, ABF cables, ADSS, various types of direct buried, pipeline, and aerial optical cables, as well as indoor and outdoor butterfly optical cables, building distribution cables, and access cables. The annual output capacity of optical cables is 3.5 million core kilometers. The FTTX accessories production base is mainly centered on FTTH FTTA supporting facilities, and independently produces PLC splitters, fiber optic fast connectors, fiber jumpers, FTTA base station waterproof jumpers, MPO/MTP 5G data center supporting products, etc., with an annual production capacity of 35 million PCS connector. At the same time, we work with many customers to develop and design optical fiber distribution boxes, optical cable connection boxes, indoor and outdoor cabinets, etc. to meet the needs of different customers for the market and provide customers with one-stop procuring services.

Carefiber people adhere to: "Excellent quality" can be a first-class corporate philosophy, and strive to improve quality products and services that exceed customer needs. Strictly follow the ISO9001 quality management system and ISO14001 environmental management system throughout the entire process to ensure high-quality products and have various international certifications such as CE, ROHS, ANATEL, etc. to guarantee the products required by customers.