power amplifier
Price:115
Contact Now
Add to Cart
Active Member
Location:
Guangzhou Guangdong China
Address:
15 Building, Hengda yujing, Baiyun, Guangzhou
Supplier`s last login times:
within 31 hours
Product Details
Company Profile
Product Details
We are power amplifier manufacturer and supplier. The switch-mode
technology on LA amplifier replaces a large, heavy AC transformer
with a highly efficient and lighter-weight active design. Special
dual power supplys (one power supply for one channel) make the bass
stay full and powerful while the high end remains crisp and clean.
Like other models from LEX, the** can also work as hard into 2 ohm
as most. The amplifier use Class H output circuitry, a form of
audio "turbocharging" that increases maximum power without
affecting the basic audio quality.
Features:
Ø High efficiency switching mode power supply design reduce the
amplifier weight
Ø Special dual power supply ensure more power to the bass
Ø Selectable input sensitivity in voltage 0.775V RMS, 1.0V RMS and
1.4V RMS
Ø Switch for sub sonic filter 30Hz and below
Ø Switch for Earth link (on and off)
Ø Comprehensives Signal (SIG), CLIP (CLIP), Protect (PRO) and
PAR/BRG (Parallel/Bridged) indicators to monitor amplifier working
status
Ø All signal inputs and outputs are on XLR male & female (2x
XLR male & 2x XLR female)
| SPECIFICATIONS | ||||||
| STEREO MODE | LA25 | LA35 | LA60 | LA80 | LA10 | LA15 |
| 8ohms (RMS/THD 1%) | 250Wx2 | 350Wx2 | 600Wx2 | 800Wx2 | 1100Wx2 | 1500Wx2 |
| 4ohms (RMS/THD 1%) | 350Wx2 | 500Wx2 | 1000Wx2 | 1500Wx2 | 1700Wx2 | 2600Wx2 |
| 2ohms | 500Wx2 | 700Wx2 | 1200Wx2 | 1600Wx2 | 1800Wx2 | 2200Wx2 |
| BRIDGE MONO MODE | ||||||
| 8ohms | 650w | 1000w | 1800w | 2800w | 3500W | 4000W |
| 4ohms | n/a | n/a | n/a | n/a | n/a | n/a |
| Signal to Noise | >95dB | |||||
| Input Sensitivity | 0.775Vrms/1.0Vrms/1.4Vrms | |||||
| Gain @ 8homs | 38dB | |||||
| Output Circuitry | Class AB | 2-Tier Class H | 3-Tier Class H | |||
| Distortion | Less than 0.02% | |||||
| Frequency Response | 20Hz-20KHz @ 8ohms ±0.5dB | |||||
| Damping Factor (@100Hz) | >300 | |||||
| Input Impedance | Balanced 20K/ Unbalanced 10K | |||||
| High Filter | 30Hz at -3dB | |||||
| Cooling | Variable-speed fan, rear-to-front air flow | |||||
| Input Connectors, each channel | XLR male & female | |||||
| Output Connectors, each channel | speakon and binding posts | |||||
| Rear Panel Swithches | Input Configuration: Bridge/Stereo/Parallel | |||||
| Input sensitivity:0.755Vrms,1.0VRMS and 1.4Vrms | ||||||
| Sub sonic filter: 30Hz and below | ||||||
| Earth link: on/off | ||||||
| Front Panel Controls | Gain Attenuator: 0 to ∞ dB Power On/Off | |||||
| Front Panel Indicators | Signal (SIG), CLIP (CLIP), Protect (PRO) and PAR/BRG (Parallel/Bridged) | |||||
| Power STY/on | ||||||
| Protection | ||||||
| Amplifier Protection | Full short circuit, thermal, infrasonic, ultrasonic,VHF,vol.gain gradually | |||||
| Load Protection | DC fault power supply,switching power supply under voltage, | |||||
| Infrasonic | -3 dB, 5 Hz | |||||
| DC fault | Power supply shutdown | |||||
| Ultrasonic | -3 dB, 85 kHz | |||||
| Short Circuits | active clip limiting, recover after limiting | |||||
| Thermal | no output at 95°C, re-work less than 95°C | |||||
| Over Current | auto limit | |||||
| PHYSICAL | ||||||
| SHIPPING WEIGHT (kgs) | 9.5 | 10 | 12.61 | 13 | 14.5 | 15.5 |
| SHIPPING SIZE ( WxDxH mm) | 560x420x138 | 560x542x138 | ||||
| All Specification Subject to Change Without Notice. | ||||||
Professional amplfier manufacturer and supplier, digital amplifier manufacturer and supplier, audio amplifier manufacturer and supplier,professional audio amplfier manufacturer
power amplifier
Inquiry Cart
0