Compression And Tension Load Cell 2kN 1kN 500N 200N 100N With M8 Mounting Hole

Compression And Tension Load Cell With M8 Mounting Hole

M8 Threaded Tension Compression Sensor FSKE is made of stainless steel based on metal foil strain gauge technology intended for both traction and compression force measurement. Compression Traction Force Sensor FSKE offers 50N / 100N / 200N / 500N / 1000N / 2000N six rated capacities with maximum 0.1% non-linearity of the full scale. M8 tapped holes located on both ends can be used to mount attachments like load button, eye bolts, hooks to fit different applications. Compact design makes force transducer FSKE a perfect option for force measurement applications with limited mounting space,you may find miniature force transducer FSKE applicable for spring tension test, mechanical simulation experiment, automation equipment, push-pull force gauge, and so on. Model FSKE can also be modified or customized as per request.

Dimensions

Ordering code of tension compression load cell FSKE

Specifications

Compression And Tension Load Cell 2kN 1kN 500N 200N 100N With M8 Mounting Hole

A Force Sensor is a transducer that converts mechanical load into mV signal proportional to the applied force.The acting force causes deformation of the measuring element,the bonded strain gage deforms accordingly which will cause the resistance change of the wheatstone bridge,under constant power supply, the output signal between Sig+ and Sig- will change proportionally,thus the load/force can be measured by measuring the output signal from the transducer.

Load cell output: = (Power supply * Rated output) * Load / Capacity
Rated output of Tension Compression Load Cell FSKE is around 2.0mV/V.
Power supply of Push Pull Load Cell FSKE is normally within 3-15V.
Load / Capacity is within 0-1.
So the output range of Compression Traction Force Sensor FSKE is normally within -30mV...+30mV.
Example: Compression And Traction Force Transducer FSKE-500N with 2.0mV/V sensitivity powered by 5V DC,the output range is -10mV...+10mV

A signal conditioner can be used with the load cell to deliver -5~5V, 0-10V or 4-20mA output.

Example: Push Pull Force Sensor FSKE-1kN working with -5-5V amplifier,the Force-Voltage relationship will be 0-1000N compression load VS 0-5V output, 0-1000N traction load VS 0-(-5V) output, which is linear regardless of the measurement error.

Click here to download datasheet

Located in China,Forsentek Co., Limited has provided load cells,force sensors and measuring solutions to more than 30 countries all over the world.

At Forsentek,you can find universal products like:

• Compression load cell
• Force sensor force transducer
• Button load cell
• Micro load cell
• Strain gauge load cell
• Reaction torque sensor
• Rotary torque sensor

Forsentek is also an expert in customized force measurement products like:

Load pins for overload protection.

Bolt sensor for fastening force monitoring.

With experienced engineers in load cell and force sensor application field,Forsentek knows exactly what you need after you talk to us.Being expert in strain gauge based load cell manafuacturing technology and custom-made service,we are confident in providing the most suiablt products to meet your application perfectly.

Send us an inquiry,we'll get back with solutions.