

Add to Cart
GE IC660EBA024 24 / 48 VDC 18 to 56 Volts DC 12.0 Watts 4 to 24
Milliamps
Product information GE IC660EBA024:
The GE Fanuc IC660EBA024 electronic assembly is made for the Genius
I/O block system.
This electronic assembly with its corresponding terminal assembly
(the IC660TAB024) makes up the whole functioning Genius I/O current
source analog block.
While the terminal assembly houses the block’s configuration
settings that are stored in EEPROM and provides a base for all the
field wiring, the electronic assembly contains the block’s
microprocessor and provides an interface between field devices and
the Genius bus. The IC660EBA024 electronic assembly also sends or
accepts 4 milliamps to 20 milliamps rated analog signals.
The IC660EBA024 electronic assembly comes with a 24/48 Volts DC
rated block with 6 individually-isolated circuit channels (4 inputs
and 2 outputs).
Each circuit channel can accept 4 to 20 milliamps rated analog
signals that are transmitted to the controller as discrete signals,
and each input on its own provides 24 Volt DC loop power.
More information of IC660EBA024 :
The IC660EBA024 Electronics Assembly has an input resolution of
1microamp and an accuracy of 0.1% of the full-scale reading at 25
degrees Celsius.
Each input channel has a signal range of 4 to 24 milliamps and an
over-range value of 0 to 25 milliamps. It has a user-selectable
input conversion time (16.6 to 400 milliseconds) and an input
impedance of 100 Ohms.
The IC660EBA024 Electronics Assembly has 2 output channels with 6.0
microamps of resolution and 0.15% of the full-scale reading output
accuracy at 25 degrees Celsius. Each output channel has a signal
range of 4 to 24 milliamps and an adjustable update time of 6 to 8
milliseconds.
The IC660EBA024 Electronics Assembly is software configurable and
it offers advanced diagnostics features including open wire
detection, low and high input alarm detection, under
range/over-range detection, feedback error detection, and internal
fault reporting diagnostics.
Same series:
IC200MDL140A
IC200MDL140D
IC200MDL140H
Our brand:
【Honeywell】 Module DCS/PLC/Transmitter
【Emerson/Delta V】 Module/ CT Motor & Drives
【ABB】 I/O Module
【AB】 Module&Touch Screen
【Rosemount】 Transmitter
【Yokogawa】 Transmitter
【Yaskawa】 Servo Drive&Servo Motor
【GE/Fanuc】 IC69 Series PLC
【Mitsubishi】 Servo Drive&Servo Motor
(Modicon,SMC,SICK,NORGREN,Siemens,Ebmpapst etc.)
1, First, send us the brand, model code/pic of the nameplate, the quantity for inquiry. Then we will send the quote to you. after confirming the model and the quantity, then we will the PI to you.
2, You can transfer by Paypal/ Western Union/Trade assurance/ T/T. When we received the payment, then we will start to prepare the order for you asap.