Product Features of PVC gypsum ceiling
- 1.Lightweight and easy to install: PVC plasterboard ceiling is easy to install and requires minimal maintenance. It can be easily cut to size and shape and can be installed by various methods.
- 2.PVC material is easier to clean and maintain than gypsum material, which effectively reduces the cost of repairing and replacing the product.
- 3.PVC drywall is resistant to moisture, making it ideal for use in areas with high humidity such as bathrooms, kitchens and basements.
- 4. Sound Absorption: PVC ceiling drywall has good sound absorption properties, making it ideal for use in areas where noise reduction is required, such as conference rooms, auditoriums and classrooms.
Specifications
PVC Gypsum Ceiling tiles,PVC Ceilings,Plasterboard Ceilings | |
Size | 595x595 mm 600x600 mm 603x603 mm 605x605 mm |
Thickness | 7mm,7.8mm,8mm,9mm... |
Edge | Square Edge With Tape or Without Tape |
Density | 280~350 kg/m3 |
Raw Materials | Gypsum Board |
Type | Fireproof, Heat Insulation, Mould-Proof, Smoke-Proof, Sound-Ab |
Pattern | Random Holes / Fine Fissured / Sand Surface and others |
Surface | Imported or domestic PVC Film. |
Installation | Match with ceiling T-bar (we could supply) |
Application | Oiffer ceiling and Interion Decoration/hotel |
MOQ | 1*20GP container |
Free Sample | Available at any time |
| Available packing | 6pcs/ctn, 8pcs/ctn, 10pcs/ctn |
| Saging resistant properties | ≤3mm |
| Thermal conductivity | 0.16w/mK |
| Humidity resist | Resistant to 95% humidity and standing water |
| Light reflectance | 0.75 |
Product Advantages
1. Ceiling surface covered by decorative vinyl already, no need further decoration.
2. easy installation, maintenance, vinyl surface wipeable.
3. Good light reflection.
4. Available version with built-in biocide.
5. A non-combustible gypsum core assures fire safety with 1 1/2-
and 2-hour fire rating achievable depending on installation.
6. Install easily in standard exposed grid systems.
7. Durable white vinyl sheeting eliminates the need for additional
surface treatment.
8. The product must not exceed a temperature of 40° Celsius and a
relative humidity of 90% before, during and after installation.
