Soil Resistivity Measurement Methods DC Resistivity Meter 4 Wire
Resistance Meter
WDDS-2C digital resistivity meter is a new generation of DC
resistivity equipment which is based on a series of advanced
electrical equipment of BTSK for resistivitysurvey, and adopts
32-bit microcontroller technology and 24-bit A / D technology
development. It applies for metal and nonmetal mineral resources
detection, city geophysical exploration, railway and bridge
inspection and so on, hydrology and engineering geology as seeking
for ground water, inspecting dam base and flood protection levee
for incipient faults, geothermal prospecting.
Main Features
- Light and flexible: advanced transmitter and receiver are designed in one unit, small
size, light weight, built-in (only WDDS-3C) 200V high-voltage power
supply allows you to easily cope with most of survey work, usually
needn’t additional bulky battery box.
- Large power supply, wide range, high precision: 6000W (1200V * 5A) power supply capacity, 100Vp-p of the wide
voltage input range, high accuracy measurement of small signals, so
that equipment can be applied to work well in high resistance
areas, access to a deeper and better measurement results.
- The "infinite" pole on panel: used to wiring the second and third pole. when using conventional
three-pole electrical measurement (combined profiles method and
combined electrical sounding method), the instrument can
automatically measure ρsA, ρsB, and ρs without operator
intervention, reduce human error and improve efficiency.
- Improved anti-interference technology and high accuracy: using multistage wave filtration, signal enhancement technology
and integrated electrical interference suppressor function (with
super anti-interference of common-mode and different mode).
- Automated: SP, drift and electrodes polarization compensation, compensation
range is ±10V.
- The over-voltage protection of receiving part up to 1200V which can protect the instrument on
any mistake operation.Transmitting unit supports over-voltage
protection, over-current protection and AB open-circuit protection
as well as DC high voltage reverse connection protection.
- Bluetooth technology, wireless remote control: Bluetooth technology enables the tablet PC to control the
WDA-1/WDA-1B mainframe in 10 meters. It enables all operations as set parameters, start
measurement, display result and save data more easily.
- Tablet PC operate, powerful function:all operations as parameters setting, data display, data storage,
curve drawing all be finished on the tablet PC, easy and visiblefor
filed data procession.
- Grounding resistance check: this function enables the operator to know the ground condition
of each electrode.
- Fault diagnoses: the diagnose program quickly detects fault and finds the damaged
part.
- Sealed configuration: featuring waterproof, dust-proof design and long life time.
Technical Specifications
Receiving Unit:
● Voltage channel: ±50V,±0.2% ±1LSB, 24bit A/D
● Maximum sampling resolution of voltage: 0.01μV
● Input impedance: ≥50MΩ
● SP compensation range: ±10V
● Current channel: 5A, ±0.2% ±1LSB,24 bit A/D
● Maximum sampling resolution of current: 0.02μA
● Suppression: ≥80dB for 50Hz industrial frequency (common mode
interference or differential mode interference).
Transmitting Unit:
● Maximum transmitting power: 6000W
● Maximum supply voltage: ±1200V(2400Vp-p)
● Maximum supply current: ±5A(10Ap-p)
● Pulse waveform of power supply: duty cycle is 1:1, bipolar
Others
● Instrument power source WDDS-2C: built-in 7.4V5.2Ah lithium
battery(or external 12V power supply);
● Mainframe interface: A,B,M,N, DC high voltage, external battery,
charger, Bluetooth, and USB, etc
● Working temperature: -10℃~+50℃, 95 %RH
● Storage temperature: -20℃~+60℃
● Weight: ≤ 4.2 Kg (WDDS-2C)
● Dimension (L×W×H): 270mm * 246mm * 175mm (WDDS-2)
Tablet PC:
Windows 10 64 bit operating system, memory no less than 2GB,
storage capacity no less than 32GB, Bluetooth, USB.
WDDS-2C is equipped with 7.4V lithium battery with automatic
protection which can auto-power-off when battery voltage is lower
than 6.6V. When the voltage is lower than 6.8V, system prompts
“Battery voltage is too low”. Then the operator needs to charge the
mainframe to avoid cut off automatically. Or to wiring with an
external 12v battery by the standard battery line in our standard
configuration.
The charging temperature should be 0 ℃ ~ 45 ℃. Charging beyond this
temperature will lead to overheating, damage the performance, or
shorten the life of the battery.
Product images
Company Pictures