Tested Rohde And Schwarz ETL TV Analyzer 500 KHz To 3 GHz With Track TV Test

Brand Name:Rohde & Schwarz

Model Number:ETL

Minimum Order Quantity:1

Delivery Time:1~3 Working Days

Payment Terms:Western Union, MoneyGram, T/T

Price:Negotiation

Contact Now

Add to Cart

Shenzhen Meigaolan Electronic Instrument Co. Ltd

Verified Supplier

Location: Shenzhen China

Address: RA1-B2,F32 of Dongjianghaoyuan, Baomin Rd, Bao'an District, Shenzhen,China

Supplier`s last login times: within 28 hours

View Contact Details

Product Details Company Profile

Product Details

Rohde And Schwarz ETL TV Analyze 500 KHz To 3 GHz With Track

The Rohde & Schwarz ETL TV Analyzer is the universal reference for the analysis of TV, mobile TV and sound broadcasting signals. Rohde & Schwarz ETL TV Analyzers combine the functionality of a TV and FM (radio) signal analyzer, a video and MPEG TS analyzer and a spectrum analyzer in a single instrument. The R&S ETL also contains generators to create analog video signals, audio signals and MPEG-2 transport streams. The Rohde & Schwarz ETL's innovative instrument concept facilitates the flexible integration of demodulators for analog and digital TV standards as well as sound broadcasting. All of the demodulators work in realtime; fast signal processing allows comprehensive, extremely accurate measurements. Its wide range of functions and flexible configuration make the R&S ETL TV analyzer the universal reference for the analysis of TV signals – for TV and cable network operators, transmitter manufacturers, service technicians and regulatory authorities.

Specifications

Frequency range from 500 kHz to 3 GHz
TV, FM (radio), video, audio, MPEG-2 transport stream and spectrum analysis in a single box
FPGA and chip-based realtime demodulators for analog
TV, DVB-T, DVB-T2, DVB-H, ATSC/8VSB, ATSC Mobile
DTV, ISDB-T(B), J.83/A/C, DVB-C, J.83/B, DTMB, T-DMB/
DAB and FM (radio)
Baseband outputs
Preselection with additional 75 Ω RF input
Video signal generator
Audio signal generator
MPEG-2 transport stream generator/recorder
Support of power sensors
DC input and rechargeable Li-ion battery

Frequency range	FM (radio)	500 kHz to 3 GHz 75 MHz to 110 MHz
Displayed average noise level (DANL)	50 MHz to 3 GHz, preamplifier OFF 500 MHz, preamplifier ON, preselector ON 3 GHz, preamplifier ON, preselector ON	≤ –140 dBm (1 Hz) typ. –166 dBm (1 Hz) typ. –161 dBm (1 Hz)
Level	Quasi-error-free for digital standards depending on transmission modes T-DMB/DAB with R&S®ETL-B203 preselector, preamplifier ON	–90 dBm to +10 dBm –92 dBm
Inherent modulation error ratio (MER)	Signal level ≥ –30 dBm, f ≤ 1.3 GHz DTMB	≥ 40 dB, typ. 46 dB ≥ 34 dB
Video S/N	Analog TV mode	≥ 60 dB

Features

Frequency range from 500 kHz to 3 GHz
TV, FM (radio), video, audio, MPEG-2 transport stream and spectrum analysis in a single box
FPGA and chip-based realtime demodulators for analog
TV, DVB-T, DVB-T2, DVB-H, ATSC/8VSB, ATSC Mobile
DTV, ISDB-T(B), J.83/A/C, DVB-C, J.83/B, DTMB, T-DMB/
DAB and FM (radio)
Baseband outputs
Preselection with additional 75 Ω RF input
Video signal generator
Audio signal generator
MPEG-2 transport stream generator/recorder
Support of power sensors
DC input and rechargeable Li-ion battery

Applications

Frequency range from 500 kHz to 3 GHz
TV, FM (radio), video, audio, MPEG-2 transport stream and spectrum analysis in a single box
FPGA and chip-based realtime demodulators for analog
TV, DVB-T, DVB-T2, DVB-H, ATSC/8VSB, ATSC Mobile
DTV, ISDB-T(B), J.83/A/C, DVB-C, J.83/B, DTMB, T-DMB/
DAB and FM (radio)
Baseband outputs
Preselection with additional 75 Ω RF input
Video signal generator
Audio signal generator
MPEG-2 transport stream generator/recorder
Support of power sensors
DC input and rechargeable Li-ion battery

Frequency range	FM (radio)	500 kHz to 3 GHz 75 MHz to 110 MHz
Displayed average noise level (DANL)	50 MHz to 3 GHz, preamplifier OFF 500 MHz, preamplifier ON, preselector ON 3 GHz, preamplifier ON, preselector ON	≤ –140 dBm (1 Hz) typ. –166 dBm (1 Hz) typ. –161 dBm (1 Hz)
Level	Quasi-error-free for digital standards depending on transmission modes T-DMB/DAB with R&S®ETL-B203 preselector, preamplifier ON	–90 dBm to +10 dBm –92 dBm
Inherent modulation error ratio (MER)	Signal level ≥ –30 dBm, f ≤ 1.3 GHz DTMB	≥ 40 dB, typ. 46 dB ≥ 34 dB
Video S/N	Analog TV mode	≥ 60 dB

Acceptance testing, maintenance and servicing of TV, mobile TV, DAB and FM transmitters
Quality assurance during the production of modulators and TV, DAB and FM transmitters
Optimization of TV, mobile TV, DAB and FM transmitter networks

List of Options

ATV-VIDEO	Analog TV test patterns additional test signals PAL/NTSC/SECAM ser.no. required
B110	High SNR FM Frontend not with ETL-B210, ETL-B215, ETL-B216, ETL-B300 or ETL-B310
B201	Additional Interfaces Digital TV not with FSL-B5
B203	RF Preselector with additional 75 Ohm RF input (retroffitting by factory)
B209	Harddisk 80 Gbyte (retrofitting by service)
B210	Digitaler demodulator for single carrier
B215	Digital demodulator for DTMBD
B216	Digital demodulator for single carrier and DTMB
B230	DC Power Supply 11 V to 19 V
B235	Li-Ion Battery Pack 10 Ah with battery charger (not with ETL-B280)
B280	MPEG Processing Board (retrofitting by service)
B281	Video and Audio Hardware Decoder Video: SDTV, MPEG-2, H.264 ETL-B280 required
B300	FPGA Extension board not with ETL-B110, ETL-B210, ETL-B215, E and ETL-B310
BCDRIVE	Broadcast Drive Test Software for ETL; requires ETL-K208
C3	Three years of depot calibration coverage based on the R&S recommended calibration interval - includes test data. The first calibration is included with product delivery with 2 additional depot calibration(s).
C5	Five years of depot calibration coverage based on the R&S recommended calibration interval - includes test data. The first calibration is included with product delivery with 4 additional depot calibration(s).
DCV	Documentation of ETL calibration values
DCV-ZP	Printout of DCV (additional, in combination with DCV-Option only)
DV-DVBH	DVB-H stream library Ser.no.of basic unit required
DV-H264	H.264 Stream Library SD, HD; MPEG-1 LII, AC-3 Serial number of basic unit required
DV-HDTV	HDTV sequences DVB and ATSC, Sr.nr. required DVG: parallel cable required
DV-ISDBT	ISDB-T transport stream library Ser.no.of basic unit required
DV-TCM	Test Card M sequences DVB and ATSC; Sr.nr. required DVG: parallel cable required
FSL-B10	GPIB interface
FSL-B30	DC power supply 12 - 28 V
FSL-B31	NiMH battery pack
FSL-B4	OCXO reference frequency
FSL-B5	Additional interfaces video/IF-output, power meter 28 V - DC for noise source
FSL-B7	Narrow resolution filters 10 Hz - 300 Hz
FSL-K7	Analogue demodulation AM/FM/PM for FSL and for ZVL with ZVL-K1
FSL-K9	Power sensor measurements with NRP
FSL-K93	Application Firmware for WIMAX# 802.16 OFDM/OFDMA Measurements (for R&S®FSL and R&S®ZVL w. R&S®ZVL-K1)
K110	FM(Radio) Firmware ETL-B110 for SNR recommended
K111	FM(Radio) Audio Analysis/Generator ETL-K110 and ETL-B201 mod.03 required
K202	Analog TV Video Analysis
K203	Analog TV Video Generator Multi standard
K208	Measurement Log for digital TV
K210	DVB-C firmware ETL-B210 or ETL-B216 required
K213	J.83/B Firmware ETL-B210 or ETL-B216 required
K220	ATSC/8VSB firmware
K221	ATSC/8VSB SFN Frequency Offset R&S ETL-K220 required
K240	DVB-T/H Firmware for ETL
K241	DVB-T/H SFN frequency offset R&S ETL-K240 required
K250	T-DMB/DAB Firmware for ETL
K251	T-DMB/DAB SFN frequency offset ETL-K250 required.
K260	ISDB-T Firmware
K261	ISDB-T SFN frequency offset R&S ETL-K260 required
K280	MPEG TS Generator/Recorder R&S ETL-B209 and R&S ETL-B280 required
K281	HDTV and Dolby Upgrade ETL-B281 required
K282	MPEG Analysis/Monitoring ETL-B280 required
K283	In-depth analysis ETL-K282 required
K284	Data Broadcast Analysis ETL-K282 required
K285	TS Template monitoring ETL-K282 required
K320	ATSC MDTV, ATSC/8VSB Firmware ETL-B300 or ETL-B310 required
K321	ATSC MDTV, ATSC/8VSB SFN Freq. Offset ETL-K320 or ETL-K322 required
K322	ATSC MDTV Upgrade ETL-K220 and ETL-B300 or ETL-B310 requir
K340	DVB-T2 Firmware ETL-B300 required
R3	Three years of depot repair coverage, including recalibration and test data if necessary to complete the repair. First year of repair coverage is provided by the 12-month new product warranty.
R5	Five years of depot repair coverage, including recalibration and test data if necessary to complete the repair. First year of repair coverage is provided by the 12-month new product warranty.
SFU-K222	MediaFLO streams sgnals stress functions ser.no. required
SFU-K224	ISDB-T Transport Streams brazilian ISDB-TB signals (H.264) ser.no. required
SFU-K225	CMMB Transport Streams signals, stress functions ser.no. required
SFU-K226	ATSC and ATSC Mobile DTV Streams video/audio signals, stress functions ser.no. required

FAQ:
1.Can you ship order to Canada or Australia ?
Yes,we can .We send orders worldwide .
2. What delivery method do you use ? and delivery time ?
We can ship by EMS,DHL,FedEx,UPS,TNT with tracking number. Usual delivery time is 4-7 workdays.
3. What is your payment term?
100% T/T payment before shipment.
4. How can I ask any other question ?
You can contact us online or leave us messages below.