

Add to Cart
1.1-1.8mm Textured/Perforated HDPE Plastic Sheet Cellular Geocells For Channel Slopes Reinforcement Protection
HDPE Plastic Sheet Cellular Geocells Description:
HDPE Geocell is made by welding the strengthened HDPE sheets by a high-power
ultrasonic. We can produce surfaces like smooth, texture or
perforated. It is a structure of three-dimension product.
HDPE Geocell is easily folding and convenient for transportation. When
construction, the HDPE geocell can be working as a network and will
be launched into a three-dimensional honeycomb grid. HDPE Geocell
has strong sidewise restraint and high rate of stiffness.
It is light materials, wear-resistant, chemically stable,
photo-oxidation, acid and alkali, suitable for different soils and
soil conditions such as desert. Besides, it has High lateral
limitations and non-slip, deformation, effectively enhancing
subgrade's bearing capacity and distributed loads.
The Advantage of Geocell
- Provides cost effective, long-term slope and channel protection
and stabilization.
- Ease in transportation and on-site handling due to collapsible
cells.
- Rapid and simple installation conforms to most terrain profiles.
- Ultrasonic welding of cell joints ensures maximum strength.
- Easily dismantled and subsequently re-used.
- Withstands high weight bearing loads.
- Resistant to biological attack and a wide range of soil borne
chemicals.
Material Properties | Unit | Test Method | |||||
Cell Depth | mm | 75 | 100 | 150 | 200 | ||
Polymer Density | g/cm3 | 0.935-0.965 | ASTM D 1505 | ||||
Environmental Stress Crack Resistance | Hours | >400 | ASTM D 5397 | ||||
Environmental Stress Crack Resistance | Hours | 6000 | ASTM D 1693 | ||||
Carbon Black Content | % | 1.5% - 2.0% | ASTM D 1603 | ||||
Nominal Sheet Thickness Before Texturing | mm | 1.27 -5%,+10% | ASTM D 5199 | ||||
Nominal Sheet Thickness After Texturing | mm | 1.52-5%,+10% | ASTM D 5199 | ||||
Strip Puncture Resistance | N | 450 | ASTM D 4833 | ||||
Seam Peel Strength | N | 1065 | 1420 | 2130 | 2840 | EN ISO13426-1B | |
Seam Efficiency | % | 100 | GRI-GS13 | ||||
Nominal Expanded Cell Size (width x length) | mm | 320x287,475x508 etc | |||||
Nominal Expanded Panel Size (width x length) | m | 2.56x8.35, 4.5x5.0, 6.5x4.5, 6.1x2.44 |
FEATURES:
1. High Grade Raw Material to Ensure the Product Performance
Use virgin HDPE material to assure consistent, reproducible, and
long-lasting performance.
2. Ultrasonic Wedling to Ensure the Strength of the Seam
Strong weld continually tested to project assurance.
3. Honeycomb Structure to Bearing Heavy Load
Prevent horizontal movement, and increase both shear strength and
bearing capacity.
4. Proformed Hole to Allow Water to Get Through
Prevents erosion, and allow water flow.
HDPE Geocell Application:
Geocell Packing: